MSI H-7187, 6-1/2" Wedge Clamp, is mechanical holding device used for strain relief in service applications. It has solid stainless bails that are used on eye hooks and insulators with a diameter larger than 1.5". This clamp is designed for low tension applications only, and also has a mechanical working load of 1,200 lbs.
Specifications/Applications:

• Bail Size: 6-1/2"
• Material: Solid Stainless Steel
• Conductor Diameter Range: 0.250" - 0.414"
• ACSR ASTM-B232: 1/0 - #4
• AAAC ASTM-B399: 1/0 - #4
• AAC ASTM-B231: 2/0 - #2

DEAD ENDS are designed generally to hold the full rated strength of 90 to 110 ton of grade galvanized steel strand.

DEAD ENDS are designed generally to hold the full rated strength of 90 to 110 ton of grade galvanized steel strand.

DEAD ENDS are designed generally to hold the full rated strength of 90 to 110 ton of grade galvanized steel strand.

DEAD ENDS are designed generally to hold the full rated strength of 90 to 110 ton of grade galvanized steel strand.

DEAD ENDS are designed generally to hold the full rated strength of 90 to 110 ton of grade galvanized steel strand.

Allied Bolt 2181 B Strand Connector 3/16" - 1/2"

• Used as a thimble for interlocking two strand loops ranging in size from 3/16" - 1/2" (25M)
• B Strand Connectors are cast from high strength Ductile Iron
• Hot Dip galvanized to meet ASTM specifications A!53
• Steel Johnny Ball

PLP PREFORMED LINE PRODUCTS GRIP; DEADEND OPEN WIRE .051" DE-2525 Color Code B-Blue

• Helical shape insures low distribution of holding stresses and prevents premature fatigue breakage
• False or Double Dead-ending can be accomplished without cutting the wire
• DE-2525 Galvanized Steel .051" Cable Diameter
• Color Code B-BLUE

PLP PREFORMED LINE PRODUCTS GRIP; DEADEND OPEN WIRE .063" DE-2505 Color Code Black

• Helical shape insures low distribution of holding stresses and prevents premature fatigue breakage
• False or Double Dead-ending can be accomplished without cutting the wire
• DE-2505 Galvanized Steel .063" Cable Diameter
• Color Code Black

PLP PREFORMED LINE PRODUCTS GRIP; DEADEND OPEN WIRE .083" DE-2506 Color Code Yellow

There is no quicker, easier way to attach Figure-8 drop wire or cable than with PREFORMED Dead-ends for Figure-8 RG-59/U coaxial cable messenger

• Helical shape insures low distribution of holding stresses and prevents premature fatigue breakage
• False or Double Dead-ending can be accomplished without cutting the wire
• DE-2506 Galvanized Steel .083" Cable Diameter
• Color Code YELLOW

PLP PREFORMED LINE PRODUCTS GRIP; DEADEND OPEN WIRE .109" GDE-2501 Color Code Black

• Helical shape insures low distribution of holding stresses and prevents premature fatigue breakage
• False or Double Dead-ending can be accomplished without cutting the wire
• GDE-2501 Galvanized Steel .109" Cable Diameter
• Color Code Black

PLP PREFORMED LINE PRODUCTS GRIP; DEADEND OPEN WIRE .120" GDE-2502 Color Code Green

• Helical shape insures low distribution of holding stresses and prevents premature fatigue breakage
• False or Double Dead-ending can be accomplished without cutting the wire
• GDE-2502 Galvanized Steel .120" Cable Diameter
• Color Code GREEN

Deadend tees are a high tension attachment used on pole, crossarms or bracing for connections to clevices, shackles, insulators and other attachment hardware.

• 60,000 lbs. minimum ultimate tensile strength
• 1-1/4" chamfered stem hole
• 13/16" mounting holes spaced 6"
• Forged steel galvanized per ASTM A-153

FIBERLIGN Figure 8 Drop Cable Dead-End offers high-strength in a lightweight package. Simple to install, the dead-end is applied on the messenger component of the Figure 8 cable after separating the fiber component at the web.

Hubbell FWDE1104 Formed Wire Deadend for Guy Strand 1/4", 0.231 - 0.259"

Hubbell FWDE1107 Formed Wire Deadend for Guy Strand 3/8", 0.337 - 0.394"

Hubbell FWDE1106 Formed Wire Deadend for Guy Strand 5/16", 0.292 - 0.336"

Hubbell FWDE1108 Formed Wire Deadend for Guy Strand 7/16", 0.395 - 0.474"

Hubbell FWDE1105 Formed Wire Deadend 9/32" for Guy Strand 0.26" - 0.291"
Formed Wire Deadends provide a fast and economical method for deadending support guy strand. Easily applied by hand without tools, they are made of the same material as the strand to which they are applied and are designed to hold the full-rated strength of the strand. For use with left-hand lay strand.

• For HSS, EHS, Common, Siemens-Martin, Utilities and Bell System Strand grades.
• Zinc plated (B-coat) EHS steel construction;
• 8,950lb (39.8KN) maximum RBS
• FWDE will hold a minimum of 100% of the guy wire rated breaking strength (RBS).

Hubbell FWFDE1104 Formed Wire False Deadend 1/4", 0.231 - 0.259"

False Deadends provide the fastest and most economical method for false deadending strand. They are easily applied by hand without tools and without the need to cut the strand. They are made of the same material as the strand to which they are applied and are designed to hold the full-rated strength of the strand. For use with left-hand lay strand.

• For HSS, EHS, Common, Siemens-Martins, utilities, and Bell System Strand
• Galvanized steel wire (B-coat) - FWFWDE
• Zinc-Aluminum coated steel wire - BFDE
• BFDE formed wire false deadends are designed for use on Bezinal® or other common Zn-Al coated steel strand.
• False deadends will hold a minimum of 100% of the guy wire rated breaking strength (RBS).

Hubbell FWFDE1107 Formed Wire False Deadend for Guy Strand 3/8", 0.337 - 0.394"

False Deadends provide the fastest and most economical method for false deadending strand. They are easily applied by hand without tools and without the need to cut the strand. They are made of the same material as the strand to which they are applied and are designed to hold the full-rated strength of the strand. For use with left-hand lay strand.

• For HSS, EHS, Common, Siemens-Martins, utilities and bell system strand grades
• Zinc-Aluminum coated steel wire - BFDE
• BFDE formed wire false deadends are designed for use on Bezinal® or other common Zn-Al coated steel strand.
• False deadends will hold a minimum of 100% of the guy wire rated breaking strength (RBS).

Hubbell FWFDE1106 Formed Wire False Deadend for Guy Strand 5/16", 0.292 - 0.336"

False Deadends provide the fastest and most economical method for false deadending strand. They are easily applied by hand without tools and without the need to cut the strand. They are made of the same material as the strand to which they are applied and are designed to hold the full-rated strength of the strand. For use with left-hand lay strand.

• For HSS, EHS, Common, Siemens-Martins, utilities, and Bell System Strand
• Galvanized steel wire (B-coat) - FWFWDE
• Zinc-Aluminum coated steel wire - BFDE
• BFDE formed wire false deadends are designed for use on Bezinal® or other common Zn-Al coated steel strand.
• False deadends will hold a minimum of 100% of the guy wire rated breaking strength (RBS).

Hubbell FWFDE1108 Formed Wire False Deadend for Guy Strand 5/16", 0.395 - 0.474"

False Deadends provide the fastest and most economical method for false deadending strand. They are easily applied by hand without tools and without the need to cut the strand. They are made of the same material as the strand to which they are applied and are designed to hold the full-rated strength of the strand. For use with left-hand lay strand.

• For HSS, EHS, Common, Siemens-Martins, utilities and bell system strand grades
• Galvanized steel wire (B-coat) - FWFWDE
• Zinc-Aluminum coated steel wire - BFDE
• DFDE formed wire false deadends are designed for use on Bezinal® or other common Zn-Al coated steel strand.
• False deadends will hold a minimum of 100% of the guy wire rated breaking strength (RBS).

For use on: Extra High Strength, High Strength, Siemens Martin, Utilities Grade.Guy-Grip Dead-end is recommended as an alternative product for guying multiple pole structures or metal towers associated with transmission construction

Color Code: Red
Length: 20 Inch
Strand Size: 3/16"

For use on: Extra High Strength, High Strength, Siemens Martin, Utilities Grade.Guy-Grip Dead-end is recommended as an alternative product for guying multiple pole structures or metal towers associated with transmission construction

Color Code: Orange
Length: 35 Inch
Strand Size: 3/8"

For use on: Extra High Strength, High Strength, Siemens Martin, Utilities Grade.Guy-Grip Dead-end is recommended as an alternative product for guying multiple pole structures or metal towers associated with transmission construction.

Color Code: Black
Length:31 Inch
Strand Size: 5/16"

PLP GDE-1104LA 1/4" Dead-End Guy-Grip, Light Application - "A" Coat For use on mischmetal alloy
dead-ends are to be only used for light applications such as new strand with a small light 144 count fiber or smaller

• For use on extra-high-strength, high-strength, Siemens Martin, utilities-grade, galvanized steel strand, performance match Bezinal, GUY-GRIP dead-ends, false dead-ends and strand splices available.
• The Guy Grip is intended for use on single wood pole associated with distribution construction. They are made of the same material as the strand to which they are applied and are rated at 100% of the strands published rated breaking strength
• Size: 1/4"
• Mean Diameter: .259"
• Length: 25"

The PLP FIBERLIGN Lite Tension Dead-end is a dielectric Dead-end designed to terminate short span, low tension ADSS fiber optic cables in low voltage environments. The Lite Tension Dead-end is a single layer component that offers an economical solution for very light loads. The product effectively transfers the low axial load on the cable at the end of the Dead-end legs to low uniform radial compression near the Dead-end loop.

The PLP FIBERLIGN Lite Tension Dead-end is a dielectric Dead-end designed to terminate short span, low tension ADSS fiber optic cables in low voltage environments. The Lite Tension Dead-end is a single layer component that offers an economical solution for very light loads. The product effectively transfers the low axial load on the cable at the end of the Dead-end legs to low uniform radial compression near the Dead-end loop.

The ADSS-CORONA Coil is intended to reduce electrical stress at the ends of the metal rods of FIBERLIGN® Dielectric Dead-Ends and Suspensions installed in high-voltage environments (areas where electrical lines are 115 kV and higher or areas where an electrical field analysis places the space potential of the ADSS cable above 12 kV).
PLP 50603745 CORONA COIL ADSS .742-.844, PLP 50603760 CORONA COIL ADSS .688-.741

Big-Grip Dead-ends are designed for use on Transmission, Antenna, Communications, and other types of guyed structures that require use of large guy strand.
For use on: Extra High Strength Siemens Martin High Strength Utilities Grade
Color Code: Black
Length: 64 Inch
Strand Size: 5/8"
Strand Construction 7W or 19W
Holding Straight 42,400 - 40,200

Big-Grip Dead-ends are designed for use on Transmission, Antenna, Communications, and other types of guyed structures that require use of large guy strand.
For use on: Extra High Strength Siemens Martin High Strength Utilities Grade
Color Code: Blue
Length: 49 Inch
Strand Size: 1/2"
Strand Construction 7W or 19W
Holding Straight 26,900

Big-Grip Dead-ends are designed for use on Transmission, Antenna, Communications, and other types of guyed structures that require use of large guy strand.
For use on: Extra High Strength Siemens Martin High Strength Utilities Grade
Color Code: Yellow
Length: 55 Inch
Strand Size: 9/16"
Strand Construction 7W or 19W
Holding Straight 35,000

The PLP FIBERLIGN Lite Tension Dead-end is a dielectric Dead-end designed to terminate short span, low tension ADSS fiber optic cables in low voltage environments. The Lite Tension Dead-end is a single layer component that offers an economical solution for very light loads. The product effectively transfers the low axial load on the cable at the end of the Dead-end legs to low uniform radial compression near the Dead-end loop.

PLP FIBERLIGN® Lite Tension Dead-end ONLY for ADSS

The PLP FIBERLIGN Lite Tension Dead-end is a dielectric Dead-end designed to terminate short span, low tension ADSS fiber optic cables in low voltage environments. The Lite Tension Dead-end is a single layer component that offers an economical solution for very light loads. The product effectively transfers the low axial load on the cable at the end of the Dead-end legs to low uniform radial compression near the Dead-end loop.

H-PLP2875004 .506" - .557", H-PLP2875005 .558" - .615", H-PLP2875006 .616" - .680", H-PLP2875007 .681" - .750"
2875004, 2875005, 2875006, 2875007

The PLP FIBERLIGN® Tangent Support (FTS) offers another method of supporting ADSS Drop Cables with excellent unbalance load capability and bend relief support. This product is designed to connect directly to J-hooks for a economical alternative. One FTS can reduce pole clutter by replacing two Dead-end and j-hook connections.

False Dead-ends are a fast, safe, and economical method for false dead-ending strand. They are designed to be applied without any special tools, and because False Dead-ends are made from the same material as the strand, they will hold the same published rated breaking strength.
Galvanized Steel, C-Coat for use on Extra High Strength or Utility Grade Strands
Color Code: Yellow
Strand Size: 1/4"
Length: 36”

False Dead-ends are a fast, safe, and economical method for false dead-ending strand. They are designed to be applied without any special tools, and because False Dead-ends are made from the same material as the strand, they will hold the same published rated breaking strength.
Galvanized Steel, C-Coat for use on Extra High Strength or Utility Grade Strands
Color Code: Green
Strand Size: 7/16"
Length: 48"