Condux 08761842 Fixed Head Innerduct Pulling Eye 1"-1 1/4", 1.06-143"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.

Condux 08761844 Fixed Head Innerduct Pulling Eye 1.5", 1.37-1.68"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.

Condux 08761846 Fixed Head Innerduct Pulling Eye 2", 1.80-2.19"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.

Condux 08914130 Fixed Head Innerduct Pulling Eye 1-1/4", 1.16" -1.43"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.
SUB - GMP60512

Condux 08914150 Fixed Head Innerduct Pulling Eye 1-3/4", 1.68"-1.81"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.

Condux 08020632 Wood Test Mandrels 2" X 12"
Pull through duct to prove joint integrity and test for out of round duct. Wood body with steel end
caps and pulling eyes.
Specifications:

• Duct Size: 2" (51 mm)
• Body Length: 12" (304 mm)
• Max O.D. : 1.75" (44 mm)
• Load Capacity: 2,2240 lbs. (9,964 N)

Condux 08960712 Pulling Eye, Inner-Duct 1-1/4" Swivel Head

Condux 08960715 Pulling Eye, Inner-Duct 1.37" - 1.50" Swivel Head
The Inner-duct Pulling Eye is a hybrid tool that combines features from standard inner-duct pulling eyes and Condux swivels. A swivel head prevents twisting and binding of the inner-duct as it is installed.
Specification:
ID Range: 1.37" - 1.50"
Max OD: 1.50"

Condux 08960720 Pulling Eye, Inner-Duct 2" Swivel Head
The Inner-duct Pulling Eye is a hybrid tool that combines features from standard inner-duct pulling eyes and Condux swivels. A swivel head prevents twisting and binding of the inner-duct as it is installed. It eliminates the need for a separate swivel on each pulling eye when installing single innerducts into individual conduits or multiple inner-ducts into a single conduit. Its short length is an advantage on tight bends compared to using a separate swivel and pulling eye. Easily installed using a 1-3⁄8" deep socket or adjustable wrench.
SUB - GMP61520

Condux 08914142 Fixed Head Innerduct Pulling Eye 1-1/2", 1.5"-1.68"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.
SUB - GMP60515

Condux 08914162 Fixed Head Innerduct Pulling Eye 2", 1.88"-2.07"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.
SUB - GMP60520

Condux 08914122 Fixed Head Innerduct Pulling Eye 1", 0.97"-1.14"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.
SUB - GMP60510

Condux International 2" Quick Double Conduit Seal-Off for blowing projectiles and line carriers through duct using an external air compressor. The Seal-Off Control Valve Body and Seal-Off Heads are sold separately.

Condux International 3" Quick Double Conduit Seal-Off for blowing projectiles and line carriers through duct using an external air compressor. The Seal-Off Control Valve Body and Seal-Off Heads are sold separately.

Condux International 3-1/2" Quick Double Conduit Seal-Off for blowing projectiles and line carriers through duct using an external air compressor. The Seal-Off Control Valve Body and Seal-Off Heads are sold separately.

Condux International 4" Quick Double Conduit Seal-Off for blowing projectiles and line carriers through duct using an external air compressor. The Seal-Off Control Valve Body and Seal-Off Heads are sold separately.

Condux International 5" Quick Double Conduit Seal-Off for blowing projectiles and line carriers through duct using an external air compressor. The Seal-Off Control Valve Body and Seal-Off Heads are sold separately. Condux 08032965

Condux International 8" Quick Double Conduit Seal-Off for blowing projectiles and line carriers through duct using an external air compressor. The Seal-Off Control Valve Body and Seal-Off Heads are sold separately. Condux 08032975

Offers a quick and easy way to connect pulling eyes or swivels to winch lines, harnesses or rope. To close, simply screw the nut onto the threaded end. Connectors are reusable.

Offers a quick and easy way to connect pulling eyes or swivels to winch lines, harnesses or rope. To close, simply screw the nut onto the threaded end. Connectors are reusable.

Offers a quick and easy way to connect pulling eyes or swivels to winch lines, harnesses or rope. To close, simply screw the nut onto the threaded end. Connectors are reusable.

Offers a quick and easy way to connect pulling eyes or swivels to winch lines, harnesses or rope. To close, simply screw the nut onto the threaded end. Connectors are reusable.

Offers a quick and easy way to connect pulling eyes or swivels to winch lines, harnesses or rope. To close, simply screw the nut onto the threaded end. Connectors are reusable.