Submit Search
Toggle mobile menu
PYTHON Rodders are best suited for less demanding applications. It has strength properties similar to our Cobra Rodder, but is more flexible. Also, like the Cobra, it has a heavy-duty outer plastic coating to resist abrasions and reduce wear. Includes one male and one female end fitting, and a tapered head.Condux Python Rodder - 5/16" x 500' W/ FOOTAGE MARKS - Condux Duct Rodder - 08084350F
PYTHON Rodders are best suited for less demanding applications. It has strength properties similar to our Cobra Rodder, but is more flexible. Also, like the Cobra, it has a heavy-duty outer plastic coating to resist abrasions and reduce wear. Includes one male and one female end fitting, and a tapered head.Condux Python Rodder - 5/16" x 300' W/O FOOTAGE MARKS - Condux Duct Rodder - 08084330
PYTHON Rodders are best suited for less demanding applications. It has strength properties similar to our Cobra Rodder, but is more flexible. Also, like the Cobra, it has a heavy-duty outer plastic coating to resist abrasions and reduce wear. Includes one male and one female end fitting, and a tapered head.Condux Python Rodder - 9/16" x 1000' W/ FOOTAGE MARKS - Condux Duct Rodder - 08083210F
PYTHON Rodders are best suited for less demanding applications. It has strength properties similar to our Cobra Rodder, but is more flexible. Also, like the Cobra, it has a heavy-duty outer plastic coating to resist abrasions and reduce wear. Includes one male and one female end fitting, and a tapered head.Condux Python Rodder - 5/16" x 700' W/O FOOTAGE MARKS - Condux Duct Rodder - 08084370
DUCTROD RAPID Designed to push a duct rod into an underground duct. It is equipped with a flexible clamping unit, allowing you to attach the machine to the sidewall of the manhole securing more stable installation.
GMP 1/4" x 400 Standard unmarked continuous duct rodders are used to pull or push lines or cables through ducts, tubes or conduits. Gmp's duct rodders are light weight, durable and corrosion resistant. They are coated with a tough UV stabilized safety orange polypropylene and are not affected by water. GMP Duct Rodder 1/4" x 400' 89208 UNMARKED
The GMP toneable duct rodders are available in 3/8" and 1/2" diameter. Detectable duct rods are used to find, follow and accurately map the duct route without digging or trenching. The traceable duct rod is used in conjunction with both a signal transmitter and a receiver. The easily identifiable signal is transmitted and a receiver. The easily transmitter signal identifiable signal is transmitted along the entire length of the duct rod.
Used in duct runs up to 600' in length, the mid-sized rodder combines flexibility & sturdy construction required by cable placing crews. Industry leading 1400 lbs. pulling strength.The fiberglass/polyester resin rod is enormously resilient & flexible allowing 9" min. radius bends to be easily negotiated. Includes vertical stand, 3/8" rod spool & tapered head tip. GMP Duct Rodder Tonable Detectable 3/8" x 600' 88230 Unmarked.
GMP 1/4" x 300 1/4in x 300ft. Standard unmarked continuous duct rodders are used to pull or push lines or cables through ducts, tubes or conduits. Gmp's duct rodders are light weight, durable and corrosion resistant. They are coated with a tough UV stabilized safety orange polypropylene and are not affected by water. GMP Duct Rodder 1/4" x 300' 89206 UNMARKED
GMP 1/4" x 500' Standard unmarked continuous duct rodders are used to pull or push lines or cables through ducts, tubes or conduits. Gmp's duct rodders are light weight, durable and corrosion resistant. They are coated with a tough UV stabilized safety orange polypropylene and are not affected by water. GMP Duct Rodder 1/4" x 500' 89210 UNMARKED
The GMP 89004 Portable Powered Duct Rod Pusher, Hydraulically powers the GMP 1/2” Duct Rodder in and out of conduits, pushing and pulling with a force up to 300 lbs. and speed that ranges up to 130'/min(40 meters/min). While accurately measuring the footage and speed with its electronic monitoring system that work in either direction. Its readout can be set in either feet or meters.When pulling back, the fiberglass rod is placed directly back onto the cassette. Features rod access areas for wiping the rod clean during the pull back operation. Also includes; a package of rod wiper pads (GMP #32290),Duct Clamp on the machine, a specially designed Duct Mounting Clamp Assembly (GMP #32221) provided on the rodder cassette, helps stabilize both pieces of equipment during use. Includes a gasoline hydraulic driven power pack(GMP #32800) and hoses. Pusher is mounted on a lightweight, brightly painted, tubular-steel frame that can be tilted at a 30-degree angle to the manhole to reduce initial bending of the fiberglass rod.GMP 89004: 210 lbs.GMP 32800: 154 lbs*1/2" Duct Rodder sold separately** user must provide length of 1-1/4” innerduct between Rod Pusher and Rodder Cassette, and another length of 1-1/4” innerduct between the pusher and the duct to be rodded.*
When loaded onto our durable yet maneuverable dispenser/carriers these duct rodders are fundamentally essential tools for underground task such as cleaning and locating ducts, threading lines or pulling cables. Rodders come with a male threaded end fitting and tapered head on the leading end and a femalethreaded fitting on the backend. GMP Duct Rodder Continuous 3/8 x 1800' 89248 Unmarked.
GMP Electronic Duct Rod Pusher. GMP eRodder, powered by a 60V DEWALT FLEXVOLT battery, provides quiet and emission-free operation. It can push 180 lbs force at 125 feet per minute. It comes with a variable speed remote hand control, optional foot control, and is mounted on a three-wheel cart with airless tires for easy maneuverability. The handle folds flat for convenient transportation. WHAT'S INCLUDED
Jameson 12-516-300M Duct Hunter™ EZ-REEL™, 5/16 in. x 300 ft.Non-invasive detectable rodder locates or maps underground conduit or pipe without digging or trenching. Attach your standard field transmitter to Duct Hunter to locate to depths up to 10'. Copper wire inside fiberglass core is energized with an electromagnetic signal that is detectable above ground through the use of your hand held signal receiver.
Jameson 12-516-400M Duct Hunter™ EZ-REEL™, 5/16 in. x 400 ft.Non-invasive detectable rodder locates or maps underground conduit or pipe without digging or trenching. Attach your standard field transmitter to Duct Hunter to locate to depths up to 10'. Copper wire inside fiberglass core is energized with an electromagnetic signal that is detectable above ground through the use of your hand held signal receiver.
Non-invasive detectable rodder locates or maps underground conduit or pipe without digging or trenching. Attach your standard field transmitter to Duct Hunter to locate to depths up to 10'. Copper wire inside fiberglass core is energized with an electromagnetic signal that is detectable above ground through the use of your hand held signal receiver. is detectable above ground through the use of your hand held signal receiver.
Jameson 13-716-500M Duct Rodder Marked Detectable, Duct Hunter 5/16" x 500'Non-invasive detectable rodder locates or maps underground conduit or pipe without digging or trenching. Attach your standard field transmitter to Duct Hunter to locate to depths up to 10'.Copper wire inside fiberglass core is energized with an electromagnetic signal that is detectable above ground through the use of your hand held signal receiver.
Jameson 10-316-200 Little Buddy® Fiberglass Fish Tape Wire Puller, 3/16 in. x 200 ft.Jameson Little Buddy fiberglass fish tape is a lightweight and portable unit that is ideal for running inside and outside conduit drops. The non-conductive wire puller features a round rod that slides easily over existing wires through multiple bends. Operates vertically or horizontally with a drag brake and safety feed eye to control payout. The included accessory kit stores in a canvas pouch for convenient access.
The Mini-Duct Hunter™ is a traceable duct rodder that offers a non-invasive solution for locating and mapping underground ducts and pipes measuring between 1/2 and 1-1/2 in. in diameter. The detectable fiberglass rod incorporates a 22 AWG copper trace wire that can be located at depths up to 10 feet. When the energized Mini-Duct Hunter™ rod is pushed into pipe, the signal radiates outward to the surface. A signal receiver detects the frequency applied to the Mini-Duct Hunter, allowing the pipe to be traced inside walls, floors or underground. Accessory kit is included.
Designed for use in fiber microduct, Jameson's Microduct Fisher 2 features all fiberglass rod construction for safety and easy handling. The low profile pulling eye is permanently mounted on the rod to move easily in microducts as small as 6mm, where traditional fish tapes are to large.Microduct Fisher II Reel features a convenient carrying handle. Available in Handheld or Stand Model 17” Diameter X 7”.Duct Rodder. Microduct Fisher, Handheld 350' x 1/8" Jameson 10-18-350MDR.
Jameson 1/2" x 1500' Marked Big Buddy Duct Rodder. This heavy duty rodder is ideal for manhole to manhole work or long run cable pulls with the ability to operate vertically or horizontally , the MEGA buddy has the versatility to handle the toughest jobs. Also features a drag brake and safety feed eye to control pay out. Has 10" bending radius, 1,400lb pull tensile strength and includes end ferrule and pulling eye. The accessory kit not included
Designed for use fiber microduct, jameson's Microduct fisher 2 features all fiberglass rod construction for safety and easy handling. The low profile pulling eye is permanently mounted on the road to move easily in fiber microducts as small as 6 mm , where traditional fish tapes are too large.Microduct Fisher II Reel features a convenient carrying handle. Available in Handheld or Stand Model 17” Diameter X 7”.
Jameson 6-14-400M Duct Rodder Marked Easy Buddy 1/4" x 400'. With a flexible 1/4 rod, the Easy Buddy is designed to hamdle tight turnes and long runs, making it ideal for rodding or fishing conduit of 1-2. Features a 4" bending radius, 400-lb pull/tensile strength and includes end ferrule and pulling eye.The accessory kit is not included. Dimensions: 28.5" x 24" x 11".
The Mini-Duct Hunter™ is a traceable duct rodder that offers a non-invasive solution for locating and mapping underground ducts and pipes measuring between 1/2 and 1-1/2 in. in diameter. The detectable fiberglass rod incorporates a 22 AWG copper trace wire that can be located at depths up to 10 feet. When the energized Mini-Duct Hunter™ rod is pushed into pipe, the signal radiates outward to the surface. A signal receiver detects the frequency applied to the Mini-Duct Hunter™, allowing the pipe to be traced inside walls, floors or underground. Accessory kit is included.
Jameson Marked Duct Rodder, Good Buddy III 3/8" x 300'. The good buddy III has the same 300'-400' rod capacity of the good buddy, yet features a slimmer frame, handle and wheels. Designed for maximum portability, the good buddy III operates horizontally or vertically. INCLUDES ACCESSORY KIT
Jameson 12A-516-800M Duct Rodder Marked Detectable, Duct Hunter 5/16" x 800'Non-invasive detectable rodder locates or maps underground conduit or pipe without digging or trenching. Attach your standard field transmitter to Duct Hunter to locate to depths up to 10'. Copper wire inside fiberglass core is energized with an electromagnetic signal that is detectable above ground through the use of your hand held signal receiver.
Jameson 13-716-600M Duct Rodder Marked Detectable, Duct Hunter 7/16" x 600'Non-invasive detectable rodder locates or maps underground conduit or pipe without digging or trenching. Attach your standard field transmitter to Duct Hunter to locate to depths up to 10'. Copper wire inside fiberglass core is energized with an electromagnetic signal that is detectable above ground through the use of your hand held signal receiver. Trace to depths up to 10".
The biggest of the good buddies, Jameson developed the Good Buddy 2 for longer runs. The non-folding frame operates vertically or horizontally. To ease transport of the increased rod weight, the frame features heavy duty wheels. All good buddy conduit rodders come standard with rod marked in 5' increments. Duct Rodder Marked Good Buddy II 3/8" x 600' Jameson 11A-25-600M.
Jameson 6-14-300M Duct Rodder Marked Easy Buddy 1/4" x 300'. With a flexible 1/4 rod, the Easy Buddy is designed to handle tight turned and long runs, making it ideal for rodding or fishing conduit of 1-2. Features 4" bending radius, 400-lb/Tensile Strength. Includes Ed Ferrule and pulling eye. The accessory kit not included Dimensions:28.5" x 24" 11"
Jameson 6-14-500M Duct Rodder Marked Easy Buddy 1/4" x 500'With a flexible 1/4" rod, the easy buddy is designed to handle tight turns and long runs, making ideal for rodding or fishing conduit of 1-2". Features 4" Bending Radius, 400-lb Pull/Tensile Strength and includes end ferule and pulling eye. Dimensions: 28.5" x 24" x 1". The accessory kit not included.Dimensions: 28.5" x 24" x 1".
Jameson Marked Duct Rodder, Good Buddy III 3/8" x 400'. The good buddy III has the same 300'-400' rod capacity of the good buddy, yet features a slimmer frame, handle and wheels. Designed for maximum portability, the good buddy III operates horizontally or vertically.INCLUDES ACCESSORY KIT
Jameson 16-14-500M Duct Hunter™ Traceable Rodder, 1/4 in. x 500 ft.Non-invasive detectable rodder locates or maps underground conduit or pipe without digging or trenching. Attach your standard field transmitter to Duct Hunter to locate to depths up to 10'. Copper wire inside fiberglass core is energized with an electromagnetic signal that is detectable above ground through the use of your hand held signal receiver.
Jameson 16-14-600M Duct Hunter™ Traceable Rodder, 1/4 in. x 600 ft.Non-invasive detectable rodder locates or maps underground conduit or pipe without digging or trenching. Attach your standard field transmitter to Duct Hunter to locate to depths up to 10'. Copper wire inside fiberglass core is energized with an electromagnetic signal that is detectable above ground through the use of your hand held signal receiver.
