Condux Fiber Optic Cable Pullers consist of a hydraulic motor, variable speed foot control, manual flow control valve for adjusting maximum speed and a manually adjustable pressure relief valve for adjusting the ultimate pull tension.

Slip Clutch Capstans from Condux are designed to mount directly on a bayonet style winch drive shaft. A factory preset torque limiter prevents pulling tensions from exceeding 400 pounds. If the preset load is reached, the capstan will "slip" and discontinue rotating. High strength aluminum and steel construction ensures product durability and cable protection.

To conform to the many specifications of fiber optic cable available, and to offer more cable pulling capabilities, Condux offers several sizes of capstans that fit the Condux Fiber Optic Cable Puller.

GMP offers you a choice of several lightweight aluminum alloy units that mount on a standard 2 7/16 in. (62mm) diameter drive shaft with either a bayonet or a cross pin type of connection.

Slip Clutch Capstans from Condux are designed to mount directly on a bayonet style winch drive shaft. A factory preset torque limiter prevents pulling tensions from exceeding 300 pounds. If the preset load is reached, the capstan will "slip" and discontinue rotating. High strength aluminum and steel construction ensures product durability and cable protection.

Slip Clutch Capstans from Condux are designed to mount directly on a bayonet style winch drive shaft. A factory preset torque limiter prevents pulling tensions from exceeding 200 pounds. If the preset load is reached, the capstan will "slip" and discontinue rotating. High strength aluminum and steel construction ensures product durability and cable protection.

GMP offers you a choice of several lightweight aluminum alloy units that mount on a standard 2 7/16 in. (62mm) diameter drive shaft with either a bayonet or a cross pin type of connection.

Condux Fiber Optic Cable Pullers consist of a hydraulic motor, variable speed foot control, manual flow control valve for adjusting maximum speed and a manually adjustable pressure relief valve for adjusting the ultimate pull tension.

To conform to the many specifications of fiber optic cable available, and to offer more cable pulling capabilities, Condux offers several sizes of capstans that fit the Condux Fiber Optic Cable Puller.

To conform to the many specifications of fiber optic cable available, and to offer more cable pulling capabilities, Condux offers several sizes of capstans that fit the Condux Fiber Optic Cable Puller.

To conform to the many specifications of fiber optic cable available, and to offer more cable pulling capabilities, Condux offers several sizes of capstans that fit the Condux Fiber Optic Cable Puller.

To conform to the many specifications of fiber optic cable available, and to offer more cable pulling capabilities, Condux offers several sizes of capstans that fit the Condux Fiber Optic Cable Puller.

The Underground Fiber Optic Sheave has all the features of the Overhead Sheave but with an additional second arm for convenient tie-off. Replacement Sheaves available.

GMP 4" Manhole Sheave with reinforced, heat-treated wrought aluminum alloy frame with two self-lubricating, bronze bushed aluminum sheaves.

Condux Cable Sheaves feature an innovative hanger arm that eliminates the possibility of cable coming off the sheave or binding against the support arm.

Underground 24 in. fiber optic sheave and shackle assembly - working load 2,000 lbs. Designed to accommodate the special handling needs of pulling fiber optic cable.

Tie off in the manhole to guide cable into the duct. 12,000 lbs. (53,378 N) cable tension load capacity. Includes light duty arm which conveniently stores inside the heavy duty arm when not in use. Also may be used with alignment arm for cable removal (5" sheaves only). Alignment arm sold separately. Sheave Size: 5 x 11

Discontinued, One On Hand
Modified Cable Leader, with nine sections and a tow hook (instead of the grip at the rear) is available for attaching a pulling eye or strand dead end.

Used for supporting a cable sheave or quadrant block in place at a manhole equipped with pulling-in irons. Will accommodate any 11", 20", or 26-1/2" cable sheave.

This general purpose capstan is used for a wide variety of pulling and hoisting applications. Cast from a high strength aluminum alloy for low weight.

Frame is high strength aluminum alloy with sheave mounted on anti-friction ball bearings for stringing overhead ground wire.
Max Wire OD 3/4" with Max Load of 3,000lbs.

Equipped with a ratchet binder using a 2" wide web to provide a sturdy, yet temporary, attachment to a pole for Fios/Vats cable reels.

Same profile as polished groove but with cast-in-place urethane polymer lining. Material will flow under the load exerted by wire rope, pulling line, or conductor.

***Sherman Reilly stringing blocks do not come with a clevis or hook SOLD SEPARATELY***

Entire sheave is manufactured from Nylon in the same 7"x3" profile as the other options. Can be used for almost all stringing applications and cable placement.

***Sherman Reilly stringing blocks do not come with a clevis or hook SOLD SEPARATELY***

Quick release Cross-Arm Bracket for easy installation, fitting 4.5" wide x 6.5" high crossarms. Bracket allows for 5 block positions: 0, 22, 45, 68, and 90 degrees.

Detent "L" Handle Safety Locking Pin w/chain for Sherman Reilly 016-010-01 Cross-arm Bracket.
Pin Diameter: 7/16"

Sherman Reilly BH-5L #1 BALL HOOK for stringing block. Socket Type Connector.

Reliable Latch Ball Safety Hook REL-SBSH. All block fittings fit into the ball adapter that comes standard with the Universal Stringing Blocks.


Condux 21003415

Oval Eye for use with Stringing Block
Sherman Reilly ASBE-55 NO. 6 OVAL EYE Ball Socket Connector.

Ball Clevis for use with Stringing Block PART SHER YCB-65A Y BALL Socket Connector.

Ball Clevis for use with Stringing Block PART SHER CB-55 Socket Connector.