SPECIAL ORDER ITEM

The TiiGER® Two-Wheel Pole Dolly is equipped with a high capacity roller cradle for easy transportation of poles in excess of 2,000 lbs. Large low-pressure turf tires handle any terrain and the portable design allows for quick Load Deck attachment. Designed with 180° steering for forward | backward and side-to-side motion.

*USE WITH TIIGER POLE PULLER*
Full reversing control. The Cube is equipped with a commercial grade gasoline engine for years of trouble free service and all terrain pneumatic tires for easy portability.10" All terrain pneumatic tires for easy portability on most surfaces. 3/4 Inch steel handle for lasting durability and quality. 1 1/2 Gallon hydraulic fluid reservoir, 1" steel tubing frame and a 4 way/ 3 position manual valve with relief. pole puller, Tiiger hydraulic utility pole puller, pole pulling equipment.

RJA1538, Ratchet Jack, 15 ton (71,2 kN) Capacity, 21.25 in (539,8 mm) Stroke, Aluminum Housing

• Light weight aluminum alloy housing is used for pole lining maintenance by telephone, light and power, and railroad companies.
• Double-lever sockets for jacking in close quarters.
• Drop-forged, alloy steel, heat treated components.
• Plated springs to resist corrosion.
• Large base insures a firm foundation.
• Supports full rated capacity on the toe or the cap.

The Slingco Deluxe Pole Puller system includes the pole puller pad and back plate weldment. The pole puller pad has studs which keep the base plate in the optimum position when pulling poles. The back plate weldment has angled teeth to increase hold on the pole during extraction.

Slingco’s pole puller offers a low point of attachment making it easy to remove even broken or cut poles.

• Low point of attachment
• 50,120 lbs lift at max pressure
• Deluxe System complete with back plate weldment & pad

Hydraulic Pole Puller

The steel clamshells are manufactured with high yield steel and coated with a proprietary coating, which secures the attachment to the metal pole.

• Small TII SP1000 Pole Size 8" to 12"
• Medium TII SP1100 Pole Size 12" to 16"
• Large TII SP1200 Pole Size 16" to 20"

Accommodates all the components including the pad. Perfect organizer for pole puller components. Securely positions & holds all components.

 
 

pole puller, tiiger hydraulic utility pole puller, Pole Pulling Equipment.

Accommodates all the components excluding the pole puller pad and is available with an optional wheel and handle kit. Perfect organizer for pole puller components. Securely positions & holds all components. Safest and most efficient for storing the pole puller.




pole puller, tiiger hydraulic utility pole puller, pole pulling equipment

Simplex 5/8 Pole Jack Chain 10760 for Simplex pole jack used to wrap around telephone pole and attach to pole
jack for lifting or loosening pole in ground. Used for the Simplex A1538 Utility Pole Jack.

Slingco makes utility pole framing and installation easier and more cost-effective than ever.
Slingco stores flat on any work vehicle and — with a few twists — transforms into the industry's most helpful device. Whether you're performing regularly scheduled pole replacement or if you're reacting to a natural disaster, Slingco gets the job done safer, faster and easy.
COMPACT: Folds to 3” x 23” x 30” for easy storage.
LIGHTWEIGHT: Only weighs 33 pounds.
STRONG: Supports poles from 30’ to 70’.
STABLE: Stays put on even and uneven ground.
Poleprop Utility Pole Framing

*USE WITH TIIGER POLE PULLER*
Designed to lock the base plate in position, eliminating any potential for slippage of the assembly, enhancing the overall efficiency of the pole puller. pole puller, tiiger hydraulic utility pole puller, pole pulling equipment

TiiGer Pole Puller  Chain - 6 Feet - 1 /2 Alloy 15 pounds

Manta Ray HC-16-25, a 25' (7.6m) Hydraulic Hose with HTMA-3A Flush Face Coupler.

*Two are required for Manta Ray and/or Pole Puller Operations*

Simplex 10800- IB1538 I-Beam Base 20'' for RJA1538 Assures Firm Foundation. Alloy Steel Chain, for utility pole jack.
BASE ONLY.

*USE WITH TIIGER POLE PULLER*
Tiiger’s 4040B Standard Tooth Back Plate has 3/4″ long teeth. Designed for use with Tiiger’s Pole Puller Assembly.

Plate Makes It Easy to Stop Chain Slippage On Hard, Small-Diameter, or Greasy Poles. Long Tooth Plate For Poles With Severe Shell Rot Only

*USE WITH TIIGER POLE PULLER*
Tiiger’s 4041B Long Tooth Back Plate has 1-1/2″ long teeth. Designed for use with Tiiger’s Pole Puller Assembly.

Plate Makes It Easy to Stop Chain Slippage On Hard, Small-Diameter, or Greasy Poles. Long Tooth Plate For Poles With Severe Shell Rot Only

Simplex SLB70 Chisel Point Lever Bar, 72" in length with a 1.25" Diameter, is used with specific Mechanical Jacks.

Jameson Universal Ground Rod Driver eliminates the need to climb above the rod for installation. It’s designed with a unique positioning guide pin, which allows the driver socket of the impact tool to be engaged to the Ground Rod Driver. You can position it at any height for installation.

Jameson Ground Rod Driver eliminates the need to climb above the rod for installation. It’s designed with a unique positioning guide pin, which allows the driver socket of the impact tool to be engaged to the Ground Rod Driver. You can position it at any height for installation.