Thimble Open, ADSS Drope Cable Dead-Ends 1/2 in; Opening Width - 3/4 in; Eye Width - 1 1/8 in; Eye Length - 2 in; Material - Steel, Plated

THIMBLE OPEN 1/2 Guy Strand J1058

MSI H-J929 3 Bolt Marriage Guy Clamp 4"with 1/2" Bolts, 3/16" - 7/16" Strand Range
3 Bolt Clamp Marriage Guy Clamp
Specifications/Features:

• Number of Bolts: 3
• Clamp Bolt Diameter: 1/2"
• Clamp Length: 4"
• Clamp Width: 1-9/16"
• Strand Diameter: 3/16" - 7/16"
• Rolled from carbon steel with straight parallel groove that will not damage strand
• The clamping bolts have special shoulders to prevent turning when the nuts are tightening
• Construct of high quality steel, hot-dip galvanized

MSI H-J931 3 Bolt Marriage Guy Clamp 6", 5/16" - 1/2" Strand Range
3 Bolt Clamp Marriage Guy Clamp

Specifications/Features:

• Number of Bolts: 3
• Clamp Bolt Diameter: 5/8"
• Clamp Length: 6"
• Clamp Width: 1-21/32"
• Strand Diameter: 5/16" - 1/2"
• Rolled from carbon steel with straight parallel groove that will not damage strand
• The clamping bolts have special shoulders to prevent turning when the nuts are tightening
• Construct of high quality steel, hot-dip galvanized

Not to be used as a suspension clamp. Can also be used with the SideWalk Guy Clamp End J0522

• Used to secure figure 8 cable to telephone poles. Bitch clamp
  
• Each Suspension Clamp is comprised of two aluminum plates, two 1/2" carriage bolts, and two square nuts.
  
• The plates are extruded and stamped from 6063-T6 Aluminum.
  
• Center hole accommodates 5/8" bolts.
  
• Figure 8 Three-Bolt Suspension Clamps are 6" long.
  
• Carriage bolt and nuts are formed from Grade 2 Steel.
  
• Carriage bolts and square nuts are hot dip galvanized to meet ASTM Specification A153, Class C.

• Used to secure figure 8 cable to telephone poles.
• Each Suspension Clamp is comprised of two aluminum plates, two 1/2" carriage bolts, and two square nuts.
• The plates are extruded and stamped from 6063-T6 Aluminum.
• Center hole accommodates 5/8" bolts.
• Figure 8 Three-Bolt Suspension Clamps are 6" long.
• Carriage bolt and nuts are formed from Grade 2 Steel.
• Carriage bolts and square nuts are hot dip galvanized to meet ASTM Specification A153.

STAINLESS STEEL Adsco Curved Suspension Clamp TBCC2 with 13/16 hole for 3/4 Hardware

STAINLESS STEEL Adsco Heavy Duty 3 Bolt Suspension Clamp TBC2 with 13/16 hole for 3/4" Hardware

STAINLESS STEEL Adsco Three Bolt Suspension Clamp TBC1
with 11/16 hole for 5/8 Hardware

Stainless Steel Single Bolt Suspension Clamp SBSC-1

• Used to attach strand to straight line poles.
• Accepts 1/4" to 7/16" strand.
• Consist of two hot rolled, specially-shaped plates.
• Plates are 1-11/16" wide and 2-1/2" long.
• Center hole accepts 5/8" Thru Bolts

Eliminates the need for thimbles, shackles, links and guy hooks
The broad radius of the eye provides an excellent attachment point to deadend or guy messenger wire, guy strand or formed wire grips
Forged of high quality steel, hot-dip galvanized

• Minimum thread length is 4".
• Recommended torque value: 130 ft lb.
• Minimum Tensile Strength: 20,050 lbf.

H-J8162 Angled 3/4" X 12" Thimble Eye Bolt, Used for dead-ending and attaching guy wires to poles and crossarms. Eliminates the need for thimble,shackles,links, and guy hooks.The broad radius of the eye provides an excellent attachment point to deadend or guy messenger wire, guy strand for formed wire grips.

• Bolt Length: 12"
• Thread Length: 6"
• 20,050 lbs. minimum tensile strength
• Recommended torque value: 130ft lb.
• Forged of high quality steel, hot-dip galvanized

H-J8163 Angled 3/4" X 14" Thimble Eye Bolt, eliminates the need for thimble,shackles,links, and guy hooks.The broad
radius of the eye provides an excellent attachment point to deadend or guy messenger wire, guy strand for formed wire grips.
Specifications:

• Bolt Length: 14"
• Thread Length: 6"
• 20,050 lbs. minimum tensile strength
• Forged of high quality steel, hot-dip galvanized

H-J8164 Angled 3/4" X 16" Thimble Eye Bolt, Used for dead-ending and attaching guy wires to poles and crossarms. Eliminates the need for thimble,shackles,links, and guy hooks.The broad radius of the eye provides an excellent attachment point to deadend or guy messenger wire, guy strand for formed wire grips.

• Bolt Length: 16"
• Thread Length: 6"
• 20,050 lbs. minimum tensile strength
• Recommended torque value: 130ft lb.
• Forged of high quality steel, hot-dip galvanized

H-J8165 Angled 3/4" X 18" Thimble Eye Bolt, Used for dead-ending and attaching guy wires to poles and crossarms. Eliminates the need for thimble,shackles,links, and guy hooks.The broad radius of the eye provides an excellent attachment point to deadend or guy messenger wire, guy strand for formed wire grips.

• Bolt Length: 18"
• Thread Length: 6"
• 20,050 lbs. minimum tensile strength
• Recommended torque value: 130ft lb.
• Forged of high quality steel, hot-dip galvanized

• Minimum thread length is 4".
• Recommended torque value: 73 ft lb.
• Minimum Tensile Strength: 13,550 lbf.

MSI H-J7902B Curved Heavy Duty Suspension Clamp, is constructed with curved ends to prevent damage to the messenger strand when turning small angles. It is used in conjunction with through bolts to serve as clamping member, securely grips messenger strand to the pole. A nut and square washers are used between the clamp and pole to provide proper spacing.
Specifications:

• Firmly grips 1⁄4" (6.6M) to 7⁄16" (16M) diameter messenger strand
• Furnished with two track bolts and a center mounting hole
• constructed of high quality steel, hot-dipped galvanized
• Clamp Bolt Diameter: 3/4"
• Clamp Length: 6"
• Clamp Width: 2-3/16"
• Mounting Hole Diameter: 13/16"

MSI H-J25088.1 5/8" Straight Suspension Clamp, with Flat Keeper Plate, is used with through bolts to serve as clamping member. This Flat 3-hole clamp securely grips messenger strand to pole, it uses a nut and square washer that is used between the clamp and pole for proper spacing.
Specifications:

• Firmly Grips 1/4" (6.6m) to 7/16" (16m) diameter messenger strand
• 3-Bolts,Flat
• Clamp Bolt Diameter: 1/2"
  
• Clamp Length: 5-3/4"
• Mounting Hole Diameter: 11/16" X 15/16"
• Constructed of high quality steel, hot-dipped galvanized

Thimbleye bolts eliminate the need for thimbles, shackles, links ans guy hooks. The broad radius of the eye provides an excellent attachment point to deadend or guy messenger wire, guy strand or formed wire grips.

Thimble eye bolts eliminate the need for thimbles, shackles, links and guy hooks. The broad radius of the eye provides an excellent attachment point to deadend or guy messenger wire, guy strand or formed wire grips.

Thimble eye bolts eliminate the need for thimbles, shackles, links and guy hooks. The broad radius of the eye provides an excellent attachment point to deadend or guy messenger wire, guy strand or formed wire grips.

Thimblye bolts eliminate the need for thimbles, shackles, links and guy hooks. The broad radius of the eye provides an excellent attachment point to deadend or guy messenger wire, guy strand or formed wire grips.

Thimblye bolts eliminate the need for thimbles, shackles, links and guy hooks. The broad radius of the eye provides an excellent attachment point to deadend or guy messenger wire, guy strand or formed wire grips.

Thimbleye bolts eliminate the need for thimbles, shackles, links ans guy hooks. The broad radius of the eye provides an excellent attachment point to deadend or guy messenger wire, guy strand or formed wire grips.