Condux 08016000H - 808 Champion Swivel 7/8" 2500 lbs.
Condux 08016000H - 808 Champion Swivel 7/8" 2500 lbs.(Not a Breakaway swivel)
Condux Ball Bearing Swivels are designed to the highest specifications for underground and overhead pulling applications. All swivels are tested and inspected to ISO 9001:2000 quality standards. This ensures the customer is getting the most reliable and safest swivel on the market. All swivels are precision machined from high grade stainless steel. Clevis pins are heat treated to prevent pin damage when using steel shackles. Each swivel is manufactured with three angular contact or deep groove ball bearings, which allow the swivel to rotate beyond its rated load. Most manufacturers use only one bearing to handle the load, causing the swivels to stop rotating before it reaches the recommended workload.
Condux 08016900 Break-Away Swivel - 5/8" 450LB Break Load
Condux 08016900 Break-Away Swivel - 5/8" 450LB
Essential for fiber optic and coaxial cable pulling, these swivels have a break load ranging from 150–1,800 pounds (667–8,006 N) and are designed to separate at ±10% of their rated break load. If the load rating is exceeded, the interior break pin fractures, the swivel separates, and the cable remains undamaged
Condux 08016905 Break-Away Swivels Replacement Pins for 5/8" Swivel 450lbs.
Condux 08016905 Break-Away Swivels Replacement Pins
Condux Breakaway Swivel are essential for fiber optic and coaxial cable pulling, these swivels have a break load ranging from 150-1,800 lbs. (667-8,006 N) and are designed to separate at 5 percent of their rated break load. If the load rating is exceeded, the interior break pin fractures, the swivel separates, and the cable remains undamaged.
Condux 08017000 - 808 Champion Swivel 5/8" 600 lbs.
Condux 08017000 - 808 Champion Swivel 5/8" 600 lbs.(Not a Breakaway swivel)
Condux Ball Bearing Swivels are designed to the highest specifications for underground and overhead pulling applications. All swivels are tested and inspected to ISO 9001:2000 quality standards. This ensures the customer is getting the most reliable and safest swivel on the market. All swivels are precision machined from high grade stainless steel. Clevis pins are heat treated to prevent pin damage when using steel shackles. Each swivel is manufactured with three angular contact or deep groove ball bearings, which allow the swivel to rotate beyond its rated load. Most manufacturers use only one bearing to handle the load, causing the swivels to stop rotating before it reaches the recommended workload.
Condux 08017700 Breakaway Swivel 7/8" 1700 lbs.
Condux 08017700 Breakaway Swivel 7/8" 1700 lbs
Essential for fiber optic and coaxial cable pulling, there swivels have a break load ranging from 150-1,800 pounds (667-8,006 N) and are designed to separate at ±10% of their rated break load. If the load rating exceeded, the interior break pin fractures, the swivel separates and the cable undamaged.
Condux 08020630 Wood Test Mandrel 4" X 6", 3.75" O.D.
Condux 08020630 Wood Test Mandrel
Pulling through duct to prove joint integrity and test for out of round duct 2,240 lbs. (9964 N) load capacity wood body with steel end caps and pulling eyes.
Specifications:
- Duct Size: 4" (102 mm)
- Length: 6" (152 mm)
- Max OD number: 3.75 (95 mm)
CONDUX 08581225 Threaded Chain Connector 1/4" 770 Lbs
Offers a quick and easy way to connect pulling eyes or swivels to winch lines, harnesses or rope. To close, simply screw the nut onto the threaded end. Connectors are reusable.
Note: To be used for cable stringing or pulling only. 1/4" 770 Lbs 6.4mm
Condux 08581231 Threaded Chain Connector 5/16" 1430 Lbs
Offers a quick and easy way to connect pulling eyes or swivels to winch lines, harnesses or rope. To close, simply screw the nut onto the threaded end. Connectors are reusable.
Note: To be used for cable stringing or pulling only. 5/16" 1430 Lbs
Condux 08581237 Threaded Chain Connector 3/8" 1,760 Lbs
Offers a quick and easy way to connect pulling eyes or swivels to winch lines, harnesses or rope. To close, simply screw the nut onto the threaded end. Connectors are reusable.
Note: To be used for cable stringing or pulling only. 3/8" 1,760 Lbs
Condux 08581250 Threaded Chain Connector 1/2" 2,755 Lbs
Offers a quick and easy way to connect pulling eyes or swivels to winch lines, harnesses or rope. To close, simply screw the nut onto the threaded end. Connectors are reusable.
Note: To be used for cable stringing or pulling only. 1/2" 2,755 Lbs
Condux 08581256 Threaded Chain Connector 9/16" 4410 Lbs
Offers a quick and easy way to connect pulling eyes or swivels to winch lines, harnesses or rope. To close, simply screw the nut onto the threaded end. Connectors are reusable.
Note: To be used for cable stringing or pulling only. 4410 Lbs 14.3mm
Condux 08581262 Threaded Chain Connector 5/8" 5510 Lbs
Offers a quick and easy way to connect pulling eyes or swivels to winch lines, harnesses or rope. To close, simply screw the nut onto the threaded end. Connectors are reusable.
Note: To be used for cable stringing or pulling only. 5/8" 5510 Lbs
Condux 08641813 Fiber Optic Pulling Grip Swivel Eye .25-.49"
Rotating Eye, K-Type Pulling Grips are made of high strength galvanized steel strand. All grips feature double weave mesh for greater strength and added mesh contact on the cable, to handle longer or heavier pulling jobs. The forged eye mates easily with a swivel or shackle. They are specially designed for use in the installation of underground power cables, communication lines and service lines into factories, shopping centers, construction projects and general underground electric...
- Cable Diameter Range: .25-.49"
- Approx. Breaking Point: 6,800 lbs.
- Eye Length: 5"
- Mesh Length: 26"
Condux 08642155 Fiber Optic Pulling Grip Swivel Eye 2.00-2.49"
Rotating Eye, K-Type Pulling Grips are made of high strength galvanized steel strand. All grips feature double weave mesh for greater strength and added mesh contact on the cable, to handle longer or heavier pulling jobs. The forged eye mates easily with a swivel or shackle. They are specially designed for use in the installation of underground power cables, communication lines and service lines into factories, shopping centers, construction projects and general underground electrical construction.
- Cable Diameter Range: 2.00-2.49"
- Approx. Breaking Point: 27,200 lbs.
- Eye Length: 9"
- Mesh Length: 36"
Condux 08643128 Fiber Optic Pulling Grip Light Duty - Standard 062.-0.74"
Fiber Optic Slack Grip - Split Mesh, Rod Closing, Single Weave steel for outside plant cable. Used for the installation of fiber optic communication lines either underground, overhead, through conduit or through enclosures. They will fit single cables or cable bundles, are easily installed on the cable and are reusable.
Condux 08643524 Fiber Optic Pulling Grip Flexible Eye 0.53-0.74"
Double/Single weave mesh, galvanized steel for outside plant cable. Used for installation of fiber optic communication lines either underground, overhead, through conduit or through enclosures. They will fit single cables or cable bundles, are easily installed on the cable and are reusable.
Fiber Optic - Flexible Eye, Double/Single Weave, Low Profile Grip
- Cable Diameter Range: 0.53-0.74"
- Approx. Breaking Strength: 3300 lbs.
- Eye Length: 6-1/2"
- Mesh Length: 24"
Condux 08643716 Fiber Optic Pulling Grip 0.38-0.49"
Fiber Optic Slack Grip - Split Mesh, Rod Closing, Single Weave steel for outside plant cable. Used for the installation of fiber optic communication lines either underground, overhead, through conduit or through enclosures. They will fit single cables or cable bundles, are easily installed on the cable and are reusable.
Condux 08643753 Fiber Optic Pulling Grip 0.10-0.22"
Double/Single weave mesh, galvanized steel for outside plant cable. Used for the installation of fiber optic communication lines either underground, overhead, through conduit or through enclosures. They will fit single cables or cable bundles, are easily installed on the cable and are reusable.
Fiber Optic - Flexible Eye, Double/Single Weave, Low Profile Grip
- Cable Diameter Range: 0.10-0.22"
- Approx. Breaking Strength: 900 lbs.
- Eye Length: 7-1/2"
- Mesh length: 10"
Condux 08643754 Fiber Optic Pulling Grip 0.21-0.35"
Double/Single weave mesh, galvanized steel for outside plant cable. Used for the installation of fiber optic communication lines either underground, overhead, through conduit or through enclosures. They will fit single cables or cable bundles, are easily installed on the cable and are reusable.
Fiber Optic - Flexible Eye, Double/Single Weave, Low Profile Grip
- Cable Diameter Range: 0.21-0.35"
- Approx. Breaking Point: 1,400 lbs.
- Eye Length: 7-1/2"
- Mesh Length: 14"
Condux 08643755 Fiber Optic Pulling Grip 0.32-0.48"
Double/Single weave mesh, galvanized steel for outside plant cable. Used for the installation of fiber optic communication lines either underground, overhead, through conduit or through enclosures. They will fit single cables or cable bundles, are easily installed on the cable and are reusable.
Fiber Optic - Flexible Eye, Double/Single Weave, Low Profile Grip
- Cable Diameter Range: 0.32-0.48"
- Approx. Breaking Strength: 2,000 lbs.
- Eye Length: 8-1/2"
- Mesh Length: 19"
Condux 08643756 Fiber Optic Pulling Grip 0.42-0.61"
Double/Single weave mesh, galvanized steel for outside plant cable. Used for installation of fiber optic communication lines either underground, overhead, through enclosures. They will fit single cables or cables bundles, are easily installed on the cable and are reusable.
Fiber Optic - Low Profile, Double/Single Weave, Low Profile Grip
- Cable Diameter Range: 0.42-0.61"
- Approx. Breaking Strength: 2,500 lbs.
- Eye Length: 8-1/2"
- Mesh Length: 21"
Condux 08643757 Fiber Optic Pulling Grip 0.53-0.74"
Double/Single weave mesh, galvanized steel for outside plant cable. Used
for the installation of fiber optic communication lines either underground,
overhead, through conduit or through enclosures. They will
fit single cables or cable bundles, are easily installed on
the cable and are reusable.
Fiber Optic - Flexible Eye, Double/Single Weave, Low Profile Grip
- Cable Diameter Range: 0.53-0.74"
- Approx. Breaking Strength: 3,000 lbs.
- Eye Length: 8-1/2"
- Mesh Length: 23"
Condux 08643758 Fiber Optic Pulling Grip 0.64-0.87"
Double/Single weave mesh, galvanized steel for outside plant cable. Used for installation of fiber optic communication lines either underground, overhead, through conduit or through enclosures. They will fit single cables or cable bundles, are easily installed on the cable and are reusable.
Fiber Optic - Flexible Eye, Double/Single Weave, Low Profile Grip
- Cable Diameter Range: 0.64-0.87"
- Approx. Breaking Strength: 4,200 lbs.
- Eye Length: 8-1/2"
- Mesh Length: 25"
Condux 08643759 Fiber Optic Pulling Grip 0.75-1.00"
Double/Single weave mesh, galvanized steel for outside plant cable. Used for installation of fiber optic communication lines either underground, overhead, through conduit or through enclosures. They will fit single cables or cable bundles, are easily installed on the cable and are reusable.
Fiber Optic - Flexible Eye, Double/Single Weave, Low Profile Grip
- Cable Diameter Range: 0.75-1.00"
- Approx. Breaking Strength: 4,200 lbs.
- Eye Length: 8-1/2"
- Mesh Length: 28"
Condux 08761842 Fixed Head Innerduct Pulling Eye 1"-1.25, 1.06"-1.43"
Condux 08761842 Fixed Head Innerduct Pulling Eye 1"-1 1/4", 1.06-143"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.
Condux 08761844 Fixed Head Innerduct Pulling Eye 1 .5", 1.37"-1.68"
Condux 08761844 Fixed Head Innerduct Pulling Eye 1.5", 1.37-1.68"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.
Condux 08761846 Fixed Head Innerduct Pulling Eye 2", 1.80"-2.19"
Condux 08761846 Fixed Head Innerduct Pulling Eye 2", 1.80-2.19"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.
Condux 08914122 Fixed Head Innerduct Pulling Eye 1", 0.97"-1.14"
Condux 08914122 Fixed Head Innerduct Pulling Eye 1", 0.97"-1.14"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.
SUB - GMP60510
Condux 08914130 Fixed Head Innerduct Pulling Eye 1-1/4", 1.06"-1.43"
Condux 08914130 Fixed Head Innerduct Pulling Eye 1-1/4", 1.16" -1.43"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.
SUB - GMP60512
Condux 08914142 Fixed Head Innerduct Pulling Eye 1-1/2", 1.5"-1.68"
Condux 08914142 Fixed Head Innerduct Pulling Eye 1-1/2", 1.5"-1.68"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.
SUB - GMP60515
Condux 08914150 Fixed Head Innerduct Pulling Eye 1-3/4", 1.68"-1.81"
Condux 08914150 Fixed Head Innerduct Pulling Eye 1-3/4", 1.68"-1.81"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.
Condux 08914162 Fixed Head Innerduct Pulling Eye 2", 1.88"-2.07"
Condux 08914162 Fixed Head Innerduct Pulling Eye 2", 1.88"-2.07"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.
SUB - GMP60520
Condux 08960712 Pulling Eye, Inner-Duct 1-1/4" Swivel Head
Condux 08960712 Pulling Eye, Inner-Duct 1-1/4" Swivel Head
The Innerduct Pulling Eye is a hybrid tool that combines features from standard innerduct pulling eyes and Condux swivels. A swivel head prevents twisting and binding of the innerduct as it is installed.
Specification:
ID Range: 1.00-1.25"
Condux 08960715 Pulling Eye, Inner-Duct 1-1/2" 1.37" - 1.5" Swivel Head
Condux 08960715 Pulling Eye, Inner-Duct 1.37" - 1.50" Swivel Head
The Inner-duct Pulling Eye is a hybrid tool that combines features from standard inner-duct pulling eyes and Condux swivels. A swivel head prevents twisting and binding of the inner-duct as it is installed.
Specification:
ID Range: 1.37" - 1.50"
Max OD: 1.50"
Condux 08960720 Pulling Eye, Inner-Duct 2" Swivel Head
Condux 08960720 Pulling Eye, Inner-Duct 2" Swivel Head
The Inner-duct Pulling Eye is a hybrid tool that combines features from standard inner-duct pulling eyes and Condux swivels. A swivel head prevents twisting and binding of the inner-duct as it is installed. It eliminates the need for a separate swivel on each pulling eye when installing single innerducts into individual conduits or multiple inner-ducts into a single conduit. Its short length is an advantage on tight bends compared to using a separate swivel and pulling eye. Easily installed using a 1-3⁄8" deep socket or adjustable wrench.
SUB - GMP61520
Specification:
ID Range: 2"
Wood Test Mandrels 2" X 12", 1.75" O.D. Condux 08020632
Condux 08020632 Wood Test Mandrels 2" X 12"
Pull through duct to prove joint integrity and test for out of round duct. Wood body with steel end
caps and pulling eyes.
Specifications:
- Duct Size: 2" (51 mm)
- Body Length: 12" (304 mm)
- Max O.D. : 1.75" (44 mm)
- Load Capacity: 2,2240 lbs. (9,964 N)
