Block & Tackle available with standard snap hooks or guarded snap hooks ( with snap hook nose lengthened to extend over the latch or keeper. Hooks fit under insulated and engage pin on cross arm, 25' length. Block & Tackle Klein 1802-30-SR
Weight (lbs.): 2.80 Maximum safe load is 750 lbs. (338 kg). 25 ft rope length.

Klein 1684-5F is desgned for use on aluminum, copper, weatherproof coated wires, PVC covered conductors and messenger and guy strand. The Chicago style grip was designed for cable sizes 0.16-0.55". Double - InchV- grooves give four point contact, reducing chance of slipping and providing proper alignment of wire and cable.
Chicago Grip for High Strength Cable

• Cable Diameter: 0.16-0.55"
• Max. Safe Load: 8,000 lbs.
• Jaw Length: 5"
• Jaw Type: Single V with File Insert
• Cable Type: Aircraft, EHS, Messenger, Guy Strand

Klein Tools 1656 Series Chicago Grips have a round, smooth inside jaw contour making it perfect for work with stranded copper cables. These smooth jaws grip with maximum contact and are less likely to cause cable deformation. All Klein grips are manufactured from custom drop-forged steel that is machined and heat treated for excellent durability. Each grip is individually hand inspected and actuated for proper function. Grips are also rigorously tested and pulled to rated load to ensure the highest quality and reliability.
Chicago Grip for Bare ACSR Aluminum and Stranded-Copper Cables

• Cable Diameter: 0.20" - 0.40"
• Cable Type: Copper, ACSR, AAC
• Jaw Type: Round
• Jaw Length: 4"
• Max. Safe Load: 4,500 lbs.

*For Insulated and covered strand Cables Only.* The Klein 1659-5AT is designed to pull 1/4" figure - 8 telephone cable. Plus, it s equipped with a chain, toggle and shackle to keep the grip from falling off the cable. All Klein grips are manufactured from drop-forged steel that is machined and heat treated for excellent durability. Each grip is individually hand inspected and actuated for proper function. Grips are also rigorously tested and pulled to rated load to ensure the highest and reliability.
Chicago Grip Type B Strand Puller

• Cable Diameter: 0.20-0.37"
• Max. Safe Load: 5,000 lbs.
• Jaw Length: 5"
• Jaw Type: Round - Serpentine
• Special Features: Equip with a chain toggle and shackle

Klein Tools' 1611 Series Chicago Grips have a round inside jaw contour designed to hold weatherproof strand and solid coated wire. They also have a notched jaw to provide a firm grip on insulation. All Klein grips are manufactured from custom drop-forged steel that is machined and heat treated for excellent durability. Each grip is individually hand inspected and actuated for proper function. Grips are also rigorously tested and pulled to rated load to ensure the highest quality and reliability.
Chicago Grip for Weatherproof Wire 1611-20

• Cable Diameter: 0.20-0.40"
• Max.Safe Load: 4,500 lbs.
• Jaw Length: 4.19"
• Jaw Type: Notched

The Klein 1659 series PVC - Covered Chicago Grips have a specially machined serepintined jaw which allows an insulated conductor to be inserted through the jaws. This eliminates the need to strip insulation from the conductor first. All Klein grips are manufactured from custom drop forged steel that is machined and heat treated for excellent durability. Each grip is individually hand inspected and actuated for proper functio. Grip are also rigorously tested and pulled to rated load to ensure the highest quality and reliability.
Chicago Grip for PVC Covered Conductor

• Cable Type: Copper
• Cable Diameter: 0.31" - 0.50" (7.87 - 12.70 mm)
• Jaw Type: Round - Serpentine
• Jaw Length: 4.75"
• Max. safe Load: 4,500 lbs.

Designed for use of aluminum,upper, weatherproof coated wire, PVC covered conductors, messenger, and guy strand. The Chicago Style grip was designed for cables sizes 0.12-1.0" When pulling EHS (Extra-High-Strength) galvanized-steel cable, the galvanizing has a tendency to coat the jaws of any grip, causing the cable to slip. Double - InchV - Inch contour reduces the possibility of slippage and damage the cable.
Chicago Grip for Extra High Strength Cable

• Cable Diameter: 0.218-0.55"
• Max. Safe Load: 8,000 lbs.
• Jaw Length: 5"
• Jaw Type: Double V Milled Curved
• Cable Type: Aircraft, EHS, Messenger, Guy Strand

Klein Tools 1656 Series Chicago Grips have a round, smooth inside jaw contour making it perfect for work with stranded copper cables. These smooth jaws grip with maximum contact and are less likely to cause cable deformation. All Klein grips are manufactured from custom drop-forged steel that is machined and heat treated for excellent durability. Each grip is individually hand inspected and actuated for proper function. Grips are also rigorously tested and pulled to rated load to ensure the highest quality and reliability.
Chicago Grip for Bare ACSR Aluminum and Stranded-Copper Cables

• Cable Diameter: 0.31" - 0.53"
• Cable Type: Copper, ACSR, AAC
• Jaw Type: Round
• Jaw Length: 4.75"
• Max. Safe Load: 4,500 lbs.

The Klein Tools 1659 series PVC-covered Chicago Grips have a specially machined serpentine jaw which allows an insulated conductor to be inserted through the jaw. This eliminates the need to strip insulation from the conductor first. All Klein grips are manufactured from custom drop forged steel that is machined and heat treated for excellent durability. Each grip is individually hand inspected and actuated for proper function. Grips are also rigorously tested and pulled to rated load to ensure the highest quality and reliability.
Chicago Grip for PVC-Covered Conductors

• Cable Diameter: 0.31-0.50"
• Max. Safe Load: 4,500 lbs.
• Jaw Length: 4.75"
• Jaw Type: Round - Serpentine

The Klein Tools 1628-16 Chicago Grip is designed for EHS, messenger, and guy strand cable. The double V provide four point contact, which reduces chance of slipping and also provides proper alignment of wire and cable. All Klein grips are manufactured from custom drop forged steel that is machined and heat treated for excellent durability. Each grip is individually hand inspected and actuated for proper function. Grips are also rigorously tested and pulled to rated load to ensure the highest quality and reliability.
Chicago Grip for High Strength Cables

• Cable Diameter: 0.31-0.62"
• Max. safe Load: 15,000 lbs.
• Jaw Length 7.25"
• Jaw Type: Double V
• Cable Type: Aircraft, EHS, Messenger, Guy strand

The klein Tools 1628-17 Chicago Grip is designed for EHS, Messenger, and Guy strand cable. The double V grooves provide four-point contact, which reduces chances of stripping and also provides proper alignment of wire and cable. All Klein grips are manufactured from custom drop forged steel that is machined and heat treated for excellent durability. Each grip is individually hand inspected and actuated for proper function. Grips are also rigorously tested and pulled to rated load to ensure the highest quality and reliability.
Chicago Grip for High Strength Cables

• Cable Diameter: 0.50-0.75"
• Max. Safe Load: 15,000 lbs.
• Jaw Length: 7.25"
• Jaw Type: Double V
• Cable Type: Aircraft, EHS, Messenger, Guy strand

Klein Tools 1611 series Chicago Grip have a road inside jaw contour designed to hold weatherproof strand and solid coated wire. They also have a notched jaw to provide a firm grips are manufactured from custom drop forged steel that is machined and heat treated for excellent durability. Each grip is individually hard inspected and actuated for proper function. grips are also rigorously tested and to rated to ensure the highest quality and reliability
Chicago Grip for Weatherproof Wire

• Cable Diameter: 0.53-0.70"
• Approx. Safe Load: 8,000 lbs.
• Jaw Length; 5.69"
• Jaw Type: Notched
• Cable Type: Copper

The Klein Tools Series Chicago Grip have around, smooth inside jaw contour making it perfect for work with stranded copper cables. These smooth Jaws grip with maximum contact and are less likely to cause cable deformation. All Klein Grips are manufactured from custom drop.forged steel that is machined and heat treated for excellent durability. Each grip is individually hand inspected and actuated for proper function. Grips are rigorously tested and pulled to rated load to ensure the highest quality and reliability.
Chicago Grip for Bare wire

• Cable Diameter: 0.53-0.74"
• Max. Safe Load; 8,000 lbs.
• Jaw Length: 5.5"
• Jaw Type: Round
• Cable Type: ACSR, AAC

Klein Tools 1656 series Chicago Grip have a round smooth inside the jaw contour making it perfect for work stranded copper. These smooth jaws grip with maximum contact and are less likely to cause cable deformation. All Klein grips are manufactured from custom drop-forged that is machined and heat treated for excellent durability. Each group is individually hand inspected and actuated for proper function. Grips are also rigorously tested and pulled to rated to load to ensure the highest quality and reliability.
Chicago Grip For Bare Wire

• Cable Diameter: 0.74-0.86"
• Max. Safe Load: 8,000 lbs.
• Jaw Length: 5.5"
• Jaw Type: Round
• Cable Type: ACSR, AAC

The Klein Tools 1613-40H Chicago Grip is designed for EHS, Messenger and Guy Strand cable. It comes with a hot-line latch for bare conductors, which allows you to place this grip on a cable with a hot-line stick. When the stick is removed, the latch closes automatically to guard against grips accidentally disengaging from the wire. All Klein grips are manufactured from custom drop-forged steel that is machined and heat treated for excellent durability. Grips are rigorously tested and pulled to rated load to ensure the highest quality and reliability.
Chicago Grip with Hot-Line Latch 0.55 Conductor Conduit

• Cable Diameter: 0.12" - 0.37"
• Cable Type: aircraft, EHS, Messenger, Guy Strand
• Jaw Length: 4.19"
• Jaw Type: Double V
• Max. Safe Load: 4,500 lbs.

Klein Tools 1604 series messenger and guy strand Haven's Grips are designed for use when a light, compact grip is desired, and where cable deformation is not a factor. They are recommended for use with steel strand cable. All Klein grips are manufactured from drop forged steel that is machined and heat treated for excellent durability. Each grip is individually hand inspected and actuated for proper function. Grips are rigorously tested and pulled to rated load to ensure the highest quality and reliability.
Haven's Grip with Swing Latch 1604-20L

• Cable Diameter: 0.125" - 0.5"
• Max. Safe Load: 5,000 lbs.
• Overall Length: 8.75"
• Jaw Type: Aggressive
• Cable Type: Messenger & Guy Strand
• Gripping pressure of the knurled jaw is applied to 1/4-Inch cable area
• Swing latch helps hold cable in the jaw

The Klein Tools 1604-20 Messenger and Guy Strand Havens grip are designed for use when a light, compact grip is desired, and where cable deformation is not a factor. The are recommended for use with steel strand cables. All Klein grips are manufactured from custom dropped-forged steel that is machined and heat treated for excellent durability. Each grip is individually hand inspected and actuated for proper function. Grip are rigorously tested and pulled to rated load to ensure highest quality and durability.
Haven's Cable Grip 1604-20

• Cable Diameter: 0.125" - 0.50"
• Cable type: Messenger and Guy strand
• Jaw Type: Aggressive
• Max. Safe Load: 5,000 lbs.

The Klein Tools 1625 Series Wire Rope Haven's Grips are designed for use when a light, compact grip is desired and where cable deformation is not a factor. This grip also comes with a swing latch to help hold cable in the jaw. All Klein grips are manufactured from custom drop-forged steel that is machined and heat treated for excellent durability. Each grip is individually hand inspected and actuated for proper function. Grips are also rigorously tested and pulled to rated load to ensure the highest quality and reliability.
Haven's Grip for Wire Rope 1625-20

• Cable Diameter: 0.28' - 0.75"
• Cable Type: Wire Rope
• Jaw Type: Aggressive
• Max. Safe Load: 8,000 lbs.

• Versatile grip hold a wider range of ACSR cable sizes reducing the number of grips needed
• Round serrated jaw holds 0.18 to 0.60-Inch (4.57 to 15.20 mm) diameter cable range
• Spring closes grip on cable to hold the initial position
• Spring‐loaded for easy one‐handed operation
• Made in USA
• Large opening in the handle accommodate a wide variety of hooks on hoists, winches and tackle blocks
• Max Safe Load of 5000-Pound (2268 kg)

• Versatile grip hold a wider range of ACSR cable sizes reducing the number of grips needed
• Round jaw holds 0.18 to 0.60-Inch (4.57 to 15.20 mm) diameter cable range
• Large opening in the handle accommodate a wide variety of hooks on hoists, winches and tackle blocks
• Hot latch closes automatically to guard against grip accidentally disengaging from wire
• Made in USA
• Locking handle keeps jaw open while grip is placed on cable with a hot stick
• Max Safe Load of 5000-Pound (2268 kg)

• Round jaw shape provides maximum contact with cable, helping to eliminate conductor damage
• Large eyelet opening in the handle to accommodate a wide variety of hooks on hoists, winches and tackle blocks
• Lightweight, compact design perfect for pulling a wide range of cable types and sizes
• Manufactured from drop-forged, heat-treated steel for excellent durability
• Made in USA
• Klein offers a lifetime warranty on material defects and workmanship for the normal life of the product
• Maximum Safe Load: 12,000 lb (5443 kg)
• Cable Diameter: 0.7'' to 1.25'' (17.78 to 31.75 mm)

Klein 1685-20, Lightweight, compact grips pull on exceptionally wide range of cable size and types.Designed with a round inside jaw contour for maximum contact to minimize conductor damage. Lower jaw is serrated to firmly grip insulated cables and conductors. Design includes a latch that prevents the grip from falling in case of jaw disengagement.
Parallel Jaw Grip

• Cable Diameter: 0.157-0.875" (3.98 mm - 22.22 mm)
• Cable Type: Messenger, EHS, Coated
• Jaw Length: 2.50"
• Jaw Type: Round - Serrated
• Max. Safe Load: 4,500 lbs.