H-3M710-TC1-25 Pair Straight/Half -Tap Modular with Solid Cap Splice Connectors
Straight/Half-Tap splice connectors permit the joining of two cables, 25 pairs at a time. They may also be used for rearranging and transferring cable without interrupting service.
Features:

• Connector Pair Count: 25
• Connector Type: Straight/Half-Tap
• Modular Type: 710
• 26-24 Gauge, 0.40/0.51mm (0.016/0.020 In.)

H-3M710-BC1-25 Pair Bridge Splice Connector Filled Module
Bridge connectors are used in conjunction with either straight-only connectors or straight/half-tap connectors to permit pluggable 3-way splices, 25 pairs at a time.
Features:

• Connector Pair Count: 25
• Connector Type: Bridge
• Modular Type: 710
• 26-22 Gauge, 0.40/0.65 mm (0.016/0.020 In.)

This test set was specifically designed for in-house telecom technicians. Its high impedance monitor prevents accidental disruption of service from clipping onto a data line while in monitor mode, thus ensuring the integrity of critical data lines. Features such as tone (DTMF) or pulse operation, talk/monitor capabilities, polarity test button and last number redial make this test set the perfect combination of features and price.

Tele-Mate® Telephone Test Set is
designed to help technicians install, service and maintain voice service with ease.
Able to tackle the complexities of today’s analogue telecom lines, the
TM-500 offers the convenience of line powered (no battery needed) operation
and useful features like high impedance monitor that is data and DSL safe,
polarity test, speed dial, last number dialled and pulse dialling making a technician
more productive.

TM-700 DSL compatible in both Monitor and Talk modes, the TM-700’s LCD screen makes reading polarity, voltage, current, and ringing frequencies easier than ever, and clearly shows speed dials and recent numbers for faster access.
TM-700 features over-voltage and over-current detection for safer operation and also features an intercom mode, a built-in toner for pair tracing, and DTMF detection and measurement

3M™ SLiC™ Aerial Closure has a floating bond and a rubber end seal that ensures a snug fit for cables while eliminating
the need for drip collars. This 1-piece, dual-wall, molded closure is designed for construction or maintenance situations
3M SLiC Aerial Closure has a floating bond and interlocking ends that expand to meet a sheath opening of any size
without the use of any special kits. The 1-piece construction of this closure provides complete splice access after
placement and without the removal of the closure or the bonding from a cable.

Shield bond connector featuring a longer and stronger stud to accommodate two bond braids with eyelets, does not include the insulating shoe.

The 4462-SN shield bond connector is an improved version of the popular 4462 shield bond connector, with a longer and stronger stud to easily accommodate two bond braids (with eyelets). It is specifically designed to supply greater pullout strength than the 4462 shield bond connector. The nuts have been deepened, too, making them much easier to hold and tighten. The 4462-SN shield bond connector is also designed for use with coated cable.

3M™ SLiC™ 3M™ SLiC™ Closures with Floating Bond and Spiral End Seal, 3M Features fewer parts and easier installation with the 3M SLiC Aerial Closure, Superior seal, Easily adaptable, Single piece design, Double wall molded construction, Made from durable, rugged materials, Easy to access and reenter. Additional Information Standard Package Quantity: 1.0 each Gross Weight: 5.8000 lbs

3M™ SLiC™ Closures with Floating Bond and Spiral End Seal that ensures a snug fit for cables while eliminating the need for drip collars. This 1-piece, 1200 Pair dual-wall, molded closure is designed for construction or maintenance situations.

Small Body Design that allows cable preparation of 59, 6, 7 and 11 coax cable (std, tri and quad) without any adjustment or blade cassette change out....

Small Body Design that allows cable preparation of 59, 6, 7 and 11 coax cable (std, tri and quad) without any adjustment or blade cassette change out....

Small Body Design that allows cable preparation of 59, 6, 7 and 11 coax cable (std, tri and quad) without any adjustment or blade cassette change out....

Small Body Design that allows cable preparation of 59, 6, 7 and 11 coax cable (std, tri and quad) without any adjustment or blade cassette change out....

Small Body Design that allows cable preparation of 59, 6, 7 and 11 coax cable (std, tri and quad) without any adjustment or blade cassette change out....

Small Body Design that allows cable preparation of 59, 6, 7 and 11 coax cable (std, tri and quad) without any adjustment or blade cassette change out....

Small Body Design that allows cable preparation of 59, 6, 7 and 11 coax cable (std, tri and quad) without any adjustment or blade cassette change out....

Plunger tip can be changed out to allow assembly of other compression connectors (EX and SPL) Calibration/ gage block and hex wrench....

Small Body Design that allows cable preparation of 59, 6, 7 and 11 coax cable (std, tri and quad) without any adjustment or blade cassette change out....

Small Body Design that allows cable preparation of 59, 6, 7 and 11 coax cable (std, tri and quad) without any adjustment or blade cassette change out....

The Gator is used on any hardline cable after it has been stripped and cored to bevel and fully clean the center conductor.

Small Body Design that allows cable preparation of 59, 6, 7 and 11 coax cable (std, tri and quad) without any adjustment or blade cassette change out....

Designed for use on 7/16” F connectors, nuts, and bolts, this patented angled speed wrench makes tightening and loosening quick and easy.

Designed for 7/16" F connectors, this speed head torque wrench skips over the corners of nuts and bolts so no repositioning of the tool is required.

Designed for use on 1/2” connectors, nuts, and bolts, this patented ratcheting speed wrench makes tightening and loosening quick and easy.

Designed for use on 7/16” F connectors, nuts, and bolts, this patented ratcheting speed wrench makes tightening and loosening quick and easy.

Jonard's adjustable wrenches are made of chrome vanadium steel with a chrome plated finish. They are forged and heat treated for maximum strength.

Designed for use on tamper-proof cross-connect cabinets, MESA closures, and CATV closures, this security wrench is the perfect tool to use when dealing with 5/16” hex tamper-proof fasteners.

Designed to fit over long binding posts, this can wrench is the perfect tool for opening telephone box fasteners and tightening nuts on binding-post terminals.

JONARD M-216CS22 - CAN WRENCH, ERGONOMIC W/ WIRE STRIPPER

Can Wrench Ergonomic 7/8" Diameter Handle, Hex Outer Socket (1 1/2" deep) with 22 AWG Stripper Blade. Open telephone box fasteners and tighten nuts on binding posts. Designed for universal access to telephone boxes and pedestals.

JONARD M-216C/EX - CAN WRENCH, ERGONOMIC HEX

Can Wrench Ergonomic 7/8" Diameter Handle, Hex Outer Socket. Double end can socket wrench, 3/8" and 7/16" hex, orange Impact resistant thermoplastic ergonomic handle. Used in placing fuses in cable terminals and connecting wires to fuses and binding posts.

RG59/6 & 7/11 COAX Stripping Tool JONARD UST-100

The UST 100 Series strips a multitude of cables. Virtually all of the blades are interchangeable with the exception of the UST-220.

The Jonard Tools UST-125 COAX stripping tool is designed to strip RG59 & RG6 Standard, Tri & Quad Shield, N48, RG7, and RG11 coaxial cables for quick and easy termination.
This COAX stripping tool features the following:

• Included blade cartridge (UST-225) provides a 2-level strip for F, BNC, and RCA connector termination
• High carbon steel blades last over 5,000 strips
• Cable stop on both sides of the cartridge ensures precise stripping without need to make adjustments
• Cartridge is reversible for ambidextrous use
• Hook and Loop strip on bottom of the tool folds back the braided shield on the cable with ease
• Large finger loop provides smooth rotation during use
• Stripping action removes 1/4" of jacket and 5/16" of shield and dielectric, which exposes the center conductor

CAT/TP & RG59/6 Cable Stripping Tool JONARD UST-150

The UST 100 Series strips a multitude of cables. Virtually all the blades are interchangeable with the exception of the UST-220. This blade is matched exclusively to the UST-175 handle. Includes Velcro strip for holding back the braided shield of the cable.

DUAL & QUAD SHIELD MINI COAX STRIPPER JONARD UST-185

The UST-185 mini coax cable stripper is specifically designed to provide a ¼”x ¼” two step strip on dual and quad shield mini coax cables. This tool works on Belden, Commscope, Times Fiber and other mini coax cables. The unique blade design has blades setup for Dual shield on one side and Quad shield on the other. Blade is capable of over 5000 strips.

Universal Cable Stripping Tool JONARD UST-500

Use for Coax, Round Network Cables and Flat Cables - This versatile tool is five tools in one. Insert the Round Cable into the second hole (adjustable) for a fast and easy strip. Will strip CAT6 cables with outside diameter up to 0.250".

This product is the Replacement Blade Cartridge for Universal Cable Stripping Tool (UST-500) and Coaxial Cable Stripping Tool (UST-100).
This blade cartridge features the following:

• Provides a 2-level strip for F, BNC, and RCA connector termination
• High carbon steel blades last for over 5,000 strips
• Cartridge is reversible for ambidextrous use
• Compatible with all of our UST Stripping Tools (except the UST-175 and UST-185)
• Stripping action removes 1/4" of jacket and 5/16" of shield and dielectric, which exposes the center conductor

This product is the Replacement Blade Cartridge for Universal Cable Stripping Tool (UST-500) and Coaxial Cable Stripping Tool (UST-125).
This blade cartridge features the following:

• Provides a 2-level strip for F, BNC, and RCA connector termination
• High carbon steel blades last for over 5,000 strips
• Cable stop on both sides of the cartridge ensures precise stripping without need to make adjustments
• Cartridge is reversible for ambidextrous use
• Compatible with all our UST Stripping Tools (except the UST-175 and UST-185)
• Stripping action removes 1/4" of jacket and 5/16" of shield and dielectric, which exposes the center conductor

JONARD RDG-30 - 30FT GLOW ROD KIT 3/16" DIAMETER

30' Glow Rod Kit 3/16" Diameter extends a full 30 feet. These glow rods are designed to provide splinter free use over the life of the product while also providing excellent flexibility. The luminescence of the rods is brighter and lasts longer than the competition.

Pole extends 18 feet (5.58 meters) for an average of 24 feet arms-length reach while providing more control and accuracy than its competitors, this telescoping pole is perfect for installing or retrieving cables in drop ceilings or other hard to reach places.

Designed to test the continuity of RJ45, RJ12, and RJ11 connectorized cables, this cable tester checks and troubleshoots pin connections in network and telecom cables.

JONARD JIC-186 - WIRE & KEVLAR CUTTING SHEARS

High carbon stainless steel blades (heat treated to HRC 58-60) designed to cut Kevlar®, cabling insulation, tape, cable ties and other material.

The Jonard Tools 6-in-1 Multi-Bit Screwdriver eliminates the need for multiple tools in your belt. This tool can be configured to 6 types of driving heads: #1 & #2 Phillips Head, 9/32" & 3/16" Cabinet Slotted Head, 5/16" & 1/4" Nut Driver Head.
This screwdriver features the following:

• Can be used for Phillips and slotted fasteners plus nuts and bolts as it includes 2 screwdriving bits and shaft is used as a nut driver
• Made of special alloy steel with polished finish for exceptional strength and long life
• Shaft is corrosion-resistant and magnetized to hold bits and fasteners for easy removal and installation
• Ergonomically designed handle for greater comfort and torque
• End of the handle is marked to be easily identifiable and features a convenient hole for hanging
• This screwdriver complies with ASME/ANSI standards

Jonard's Cabinet Slotted Screwdrivers are made with an S2 steel shank and a chrome finish for exceptional strength and long life. Our Cabinet Slotted Screwdrivers feature the following:

• Internal shank flanges to prevent the handle from slipping
• Black oxide finished tip to prevent corrosion and magnetized to hold fasteners for easy removal and installation
• Tip is cabinet slotted for easier access to hard-to-reach places
• Ergonomically designed handle for greater comfort and torque
• End of the handle is marked to be easily identifiable and features a convenient hole for hanging
• This Cabinet Slotted Screwdriver complies with ASME B107.600 and ISO 2380 standards

Jonard's Cabinet Slotted Screwdrivers are made with an S2 steel shank and a chrome finish for exceptional strength and long life. Our Cabinet Slotted Screwdrivers feature the following:

• Internal shank flanges to prevent the handle from slipping
• Black oxide finished tip to prevent corrosion and magnetized to hold fasteners for easy removal and installation
• Tip is cabinet slotted for easier access to hard-to-reach places
• Ergonomically designed handle for greater comfort and torque
• End of the handle is marked to be easily identifiable and features a convenient hole for hanging
• This Cabinet Slotted Screwdriver complies with ASME B107.600 and ISO 2380 standards

Jonard's Cushion Gripped Screwdrivers are made with an S2 steel shank with a chrome finish for exceptional strength and long life.

Jonard's Phillips Screwdrivers are made with an S2 steel shank with a chrome finish for exceptional strength and long life.
Our Phillips Screwdrivers feature the following:

• Internal shank flanges to prevent the handle from slipping
• Black oxide finished tip to prevent corrosion and magnetized to hold fasteners for easy removal and installation
• Ergonomically designed handle for greater comfort and torque
• End of the handle is marked to be easily identifiable and features a convenient hole for hanging
• This Phillips Screwdriver complies with ASME B107.600 and ISO 2380 standards

JONARD SDP-2 - SCREWDRIVER PHILLIPS #2 X 4"

Phillips Screwdrivers are made of special alloy steel for exceptional strength, long life and corrosion prevention. Phillips Screwdrivers are precision machined for that perfect fit. Soft rubber handles offer comfort and greater torque. The end of the handle is marked to identify the tool's size, and the tips are magnetic. Meets applicable ASME/ANSI specifications.

Jonard's Phillips Screwdrivers are made with an S2 steel shank with a chrome finish for exceptional strength and long life.
Our Phillips Screwdrivers feature the following:

• Internal shank flanges to prevent the handle from slipping
• Black oxide finished tip to prevent corrosion and magnetized to hold fasteners for easy removal and installation
• Ergonomically designed handle for greater comfort and torque
• End of the handle is marked to be easily identifiable and features a convenient hole for hanging
• This Phillips Screwdriver complies with ASME B107.600 and ISO 2380 standards

Jonard's Stubby Cushion Gripped Screwdrivers are made with an S2 steel shank with a chrome finish for exceptional strength and long life.
The screwdrivers in this set feature the following:

• Internal shank flanges to prevent the handle from slipping
• Black oxide finished tip to prevent corrosion and magnetized to hold fasteners for easy removal and installation
• Slotted screwdrivers tip is cabinet slotted for easier access to hard-to-reach places
• Ergonomically designed handle for greater comfort and torque
• End of the handle is marked to be easily identifiable while stored
• These screwdrivers comply with ASME B107.600 and ISO 2380 standards
• Overall Length of each screwdriver is 3 1/2" (89 mm) each

Jonard’s Nut Drivers have a full length hollow shaft, making them a great tool to use on stacked circuit boards and long bolts/studs. Nut Driver Set - 7 Piece 3/16", 1/4", 5/16", 11/32", 3/8", 7/16" & 1/2".

Designed for heavy duty use with an ergonomic handle, these electrician’s scissors are made of chrome vanadium steel and reinforced with a special hardening process for greater durability and cutting performance.
These scissors feature the following:

• Free fall hinge engages blades at last third of the blades, reducing hand fatigue
• Loose enough to allow fingertip operation
• One blade has a serrated edge that holds wire in place for cleaner cuts
• Notched to strip 18-20 AWG and 22-24 AWG wire with ease
• Scraper and file located on back of blade for convenience
• Nickel-plated for corrosion resistance

Designed for heavy duty use with an ergonomic handle, these electrician’s scissors are made of chrome vanadium steel and reinforced with a special hardening process for greater durability and cutting performance.
These scissors feature the following:

• Ergonomic handle provides increased comfort compared to standard scissors
• One blade has a serrated edge that holds wire in place for cleaner cuts
• Scissor-run design is perfect for cutting Kevlar® and wire
• Notched to strip 18-20 AWG and 22-24 AWG wire with ease
• Scraper and file located on back of blade for convenience
• Nickel-plated for corrosion resistance

Designed to cut copper, aluminum, leather, plastic, and other materials, these heavy duty scissors are the perfect tool for cutting cables up to 1/4” in diameter.
These scissors feature the following:

• One blade is serrated for a tight and secure grip while cutting
• Wire stripper accommodates 12 AWG, 14 AWG and 18 AWG (2.0, 1.5 and 1.0 mm2 cross sectional area) wire
• Dual component polypropylene (PP) and thermoplastic rubber (TPR) grip for greater comfort and ergonomics
• Includes a safety locking mechanism and adjustment screw for convenience
• Not for use on stainless steel or other hardened/heat treated metals

Designed for telecom and electrical applications, these heavy duty scissors are the perfect tool for cutting cables up to 1/4” diameter and for other objects as well.
These scissors feature the following:

• One blade is serrated for a tight and secure grip while cutting
• High carbon stainless steel blades for maximum strength and durability
• Two stripping notches included for stripping 18-20 AWG and 22-24 AWG wires
• Dual component nylon and Santoprene™ grip for greater comfort and ergonomics
• Adjustable screw underneath hinge cap to configure blades to your needs

Featuring an ergonomic cable splicing knife and electrician’s scissors in a comfortable leather pouch, the TK-400 Splicer’s Kit is the perfect compact tool kit for cable splicing needs.

Jonard’s slip joint pliers are made of carbon steel with a black phosphate finish and are heat treated for maximum strength and durability.

A technician's Service Kit designed for maintaining telecommunications and data communications networks.

Designed to test the continuity of RJ45, RJ12, and RJ11 connectorized cables, this cable tester checks and troubleshoots pin connections in network and telecom cables.

Jonard’s Nut Drivers have a full length hollow shaft, making them a great tool to use on stacked circuit boards and long bolts/studs. Our Nut Drivers feature the following:

• Internal shaft flanges to prevent the handle from slipping
• Ergonomically designed handle with thermoplastic rubberized grip for greater comfort and torque
• End of the handle is marked to be easily identifiable while stored
• This product complies with ASME B107.110 and ANSI standards