Type FO™ is great for cleaning glass fiber or connector end faces for better light transmission performance. Type FO™ quickly removes dust, oils, and contaminants, while leaving no residue.

Grime-Away™ wipes are heavy-duty towelettes premoistened with a multi-purpose cleaning solution. Grime-Away™ moisturizes and softens hands while cleaning tools and surfaces. Grime-Away™ towels feature a textured side to quickly remove greases, dirt,
and grime. They also feature a soft side to be gentler on skin.

Type RP™ is available in convenient pre-saturated towelettes and cable prep kits. Pre-saturated wipes are a great option for field use. The towels are durable and non-linting. The pouch package limits vapor exposure and eliminates spill and splash hazards.

HydraSol® Remover softens, removes and suspends cable filling greases. The solvent remains active and is only slowly "used up." HydraSol® Remover is good for multiple cleaning for economy and efficiency.

New SqueekyKleen™ cleans and fans fiber in two wipes without alcohol, saving time and money. Hear the difference! No follow-up with alcohol required to get fibers squeaky clean and separated when prepping for splicing.

Polywater® Lubricant F 1-quarter squeeze bottle is a high performance, pourable liquid lubricant recommended for long, difficult, lightguide cable pulls.

Polywater’s non-woven FiberKleen™ Towelettes trap dirt and absorb contaminants from fiber optic cable and optical equipment. A smooth wiping surface and durable material promote easy, effective cleaning.

Polywater® Prelube 2000™ reduces frictional drag during the blowing of outside plant cable into duct. It increases the length of cable that can be blown in a single shot.

Polywater® Type HP™ is the best option for reducing the number of different solvents used in maintenance and cleaning operations. It is excellent for termination of medium and high voltage cables, and for degreasing a wide variety of apparatus, including switchgear, contacts, transformers, and electrical motors.

Polywater® FD™ 16oz Electrical Contact Cleaner is a fast-drying, multi-purpose industrial and maintenance cleaner. It is suitable for electrical and communication maintenance cleaning.

Type FO™ is great for cleaning glass fiber or connector end faces for better light transmission performance. Type FO™ quickly removes dust, oils, and contaminants, while leaving no residue.

Polywater® Lubricant F is a high performance, pourable liquid lubricant recommended for long, difficult, lightguide cable pulls. It is slow drying and leaves a lubricating film after its waterbase has evaporated.

Repairs Damaged Cable Jacket – Can be used to repair medium voltage cable jacket (semicon must not be damaged). Reusable Dispensing Cartridge – One cartridge repairs multiple cables.

Polywater® FTTx Fiber Lubricant makes the installation of fiber drops easy. The lubricant is concentrated, only a thin film is required for immediate tension reduction that lasts even as the lubricant dries. Spray or wipe the cable or conduit. Quick and easy to use without mess or excess lubricant.

Type FOTM Anhydrous Isopropyl Alcohol has essentially no water content. Type FOTM is great for cleaning fiber optics and associated equipment. It quickly removes dust, oils, and contaminants, while leaving no residue.

New SqueekyKleen™ cleans and fans fiber in two wipes without alcohol, saving time and money. No follow-up with alcohol required to get fibers squeaky clean and separated when prepping for splicing.

FiberKleen™ towelette dispenser contains 175 lint-free, high-quality microfiber
towels that are used to clean ferrules, bulkheads and fiber endfaces.
The engineered design of the nonwoven, highly absorbent towel traps the dirt and debris
re-moved from ferrules, making cleaning easier and more effective. Variety of swabs also available.

Grime-Away™ wipes are heavy-duty towelettes premoistened with a multi-purpose cleaning solution. Grime-Away™ moisturizes and softens hands while cleaning tools and surfaces. Dispenser with 72 10" x 12" premoistened wipes

Polywater® Prelube 5000™ reduces frictional drag during the blowing of small diameter fiber optic microcable into microtube duct. It increases the length of cable that can be blown in a single shot.

HydraSol® Remover softens, removes and suspends cable filling greases. The solvent remains active and is only slowly "used up." HydraSol® Remover is good for multiple cleaning for economy and efficiency. 1-quart /0.95-liter bottle with flip-top cap

Polywater® CPL 1gal Pourable Liquid Lubricant for Communications Cable Pulling. Polywater^® Lubricant CPL is a high-performance, pourable liquid cable pulling lubricant formulated specifically for the communications industry. It is recommended for long fiber optic, copper-paired or coaxial cable pulls.

Polywater® Lubricant CGL 1gl is a high performance, gel cable pulling for fiber optic, copper or coaxial cable pulls. Polywater® Lubricant CGL is a high performance, gel cable pulling for fiber optic, copper or coaxial cable pulls.

CableFree® Loosener is a white, water-based, general-purpose dissolver/lubricant. It is a thick, pourable liquid for convenient loading into conduit. It dissolves waxes, bitumen, soil deposits, and lifts rust. It also provides a lubricating film to ease cable removal once the cable has broken free

Polywater® Prelube 2000™ reduces frictional drag during the blowing of outside plant cable into duct. It increases the length of cable that can be blown in a single shot.

FST^™ closed-cell duct sealant provides superior pressure-blocking power in the toughest environments. It stops methane and other gases to keep electrical systems intact.

Type FOTM Anhydrous Isopropyl Alcohol has essentially no water content. Type FOTM is great for cleaning fiber optics and associated equipment. It quickly removes dust, oils, and contaminants, while leaving no residue.

HydraSol® Remover softens, removes and suspends cable filling greases. The solvent remains active and is only slowly "used up." HydraSol® Remover is good for multiple cleaning for economy and efficiency.

Polywater® Lubricant CGL is a high performance, gel cable pulling for fiber optic, copper or coaxial cable pulls. Polywater® Lubricant CGL provides maximum friction reduction between cable and conduit under both low and high sidewall bearing pressures. It is slow-drying and leaves a lubricating film after its water base has evaporated.

FST^™ closed-cell duct sealant provides superior pressure-blocking power in the toughest environments. It stops methane and other gases to keep electrical systems intact.

FST^™ closed-cell duct sealant provides superior pressure-blocking power in the toughest environments. It stops methane and other gases to keep electrical systems intact.

Grime-Away™ wipes are heavy-duty towelettes premoistened with a multi-purpose cleaning solution. Grime-Away™ moisturizes and softens hands while cleaning tools and surfaces. Dispenser with 72 10" x 12" premoistened wipes

Polywater® Lubricant F 5gl is a high performance, pourable liquid lubricant recommended for long, difficult, lightguide cable pulls.
It is slow drying and leaves a lubricating film after its water base has evaporated.

Polywater® Lubricant CPL 5gal is a high performance, pourable liquid cable pulling lubricant for long fiber optic, copper or coaxial cable pulls.

QuicKleen^™ is a unique solvent blend that cleans completely, leaves no residue, and evaporates quickly. QuicKleen Fiber EndFace Cleaner is available in a convenient 2-fl oz/60-ml spray package, and as part of an all-inclusive kit.

ZipSeal™ Duct Sealant is a practical and efficient way to seal innerducts and conduits. The revolutionary Zip-Disc insert and unique two-part foam installs quickly and effectively.