GMP 89000 TORNADO CABLE BLOWING MACHINE
GMP 89003 TORNADO
Designed to be safe, fast and effective, even on tough terrain, the "Tornado" cable blowing machine will move fiber optic cable of 0.23 to 1.25 in. (5.84-32 mm) diameter at speeds to 300 ft./min. (90 m/min.) into pre-installed innerduct or direct-buried duct. It can accommodate innerduct from .47 to 2.48 in. (12-63 mm). A conversion kit allows the Tornado to place 12.7/10mm, 12/10mm or 10/8mm micro duct into the innerduct.
Condux 08782010 Gulfstream 400 Fiber Optic Cable Blower
Gulfstream 400 Fiber Optic Cable Blower Package 1A
(includes Cable Packs # 1-4, and Duct Packs #2-5)
Extremely easy to transport, the blower and all accessories
conveniently fit into a lightweight job box with wheels.
Designed for the installation of fiber optic cables with diameters from
0.23" (5.8 mm) to 1.13" (28.7 mm) into microduct.
Order Duct and Cable Packs separately, to ensure the
correct size for your needs.
GS400, GS 400
MultiFlow RAPID for SINGLE CABLE Fiber Blower FREMCO 101-41021
MultiFlow RAPID Single Cable 101-41021 and Relining 101-41002
This machine is very flexible as it can both be configurated for single cable and for relining. It can blow many different combinations of ducts and microducts.
- Designed for RELINING of multiple micro ducts, but it can also be operated for SINGLE CABLES
- Fiber/Cable OD: 5.5-32 mm
- Duct size OD: 10-63 mm
- Preparation time: 8-10 min
- Blowing distance: up to 16,404 feet
- Floating distance (with water):up to 32,808 feet
INCLUDES:
- Inlet guide incl. rollers and digital counter (US Item No.: 103-190109002)
- Flex block (Item No.: 103-200210001)
- 1 set of chains (chosen on page 2)*
- 1 Portable work station. It protects the machine during transportation and creates a better work posture.
PowerFlow RAPID Fiber Blower FREMCO 101-41001
POWERFLOW RAPID
- Easy to operate and designed for rough conditions. This hydraulic machine can blow a large variety of larger cables, fibers and ducts.
- Fiber/Cable OD: 5.5-25 mm
- Duct size OD: 10-63 mm
- Preparation time: 8-10 min
- Blowing distance: up to 16,404 feet
- Floating distance (with water): up to 32,808 feet
INCLUDES:
- Inlet guide incl. rollers and digital counter (US Item No.: 103-190109002)
- Flex block (Item No.: 103-200210001)
- 1 set of chains (chosen on page 2)*
- 1 Portable work station. It protects the machine during transportation and creates a better work posture.
Condux 08785000 M17 Kaeser Air Compressor 220psi 35cfm
Condux 08785000 Mobiliar M17 Air Compressor with Aftercooler / Air Conditioner, with 220psi 35cfm is a rugged and dependable unit that is perfect for variety of applications with a folding handle, oversized pneumatic tires, and compact compact design, this unit is easy to move around virtually any job-site. The M17 features Kaeser's power saving Sigma Profile airend.
M17 BREEZE AIR COMPRESSOR GMP89011
The Air Compressor is designed specifically for use with our Micro Fiber Cable Blowing Machines. This reliable & efficient screw compressor, powered by a gasoline engine, provides a maximum working pressure of 220 psi (15 bar) with 35.3cfm (1000 litres/m) flow.
FREMCO 101-180416003 MICROFLOW TOUCH Fiber Blower
MICROFLOW TOUCH Fully automatic fiber blowing machine that secures fast and reliable optical fiber blowing. Designed for air blown fiber and small fiber optic cables
Fiber blowing machine for FTTH fibers (EPFU) and micro cables up to 6.5 mm
- Fiber/Cable OD: 0.8-6.5 mm
- Duct size OD: 4-16 mm
- Preparation time: 5 min
- Blowing distance: up to 8,202 feet
Condux 08783805-50 Gulfstream 250™ Micro Fiber Blower Standard Kit
The Gulfstream 250 is an effective and economical approach to middle mile fiber installations. Able to install fiber optic cable ranging in size from 2.5mm - 8mm into duct from 5mm - 18mm, the Gulfstream 250 offers portability, convenience and power in a cost effective package
DUCTROD RAPID Push a Duct Rod into an Underground Duct FREMCO 101-230320001
DUCTROD RAPID
Designed to push a duct rod into an underground duct. It is equipped with a flexible clamping unit, allowing you to attach the machine to the sidewall of the manhole securing more stable installation.
- Fiber/Cable OD: 9-25 mm
- Duct size OD: 10-40 mm
- Preparation time: 2-4 min
- Blowing distance: up to 500 feet
When utilizing DuctRod RAPID, the configuration and installation can be deployed without any usage of tools.
This makes every job more effective as the machine can quickly be adapted to the specific job saving you time.
- Adaptable to various manholes
It is equipped with a flexible clamping unit, allowing you to attach the machine to the sidewall of the manhole securing more stable installation.
Each job is mechanized, which help you improve efficiency and minimizes the risk of costly errors. For rods up to 25 mm.
- Adjustable Torque Distance and Speed
- measurement for complete rod control
INCLUDES:
- 1-¼“ duct clamp set (outlet) &
- ¾ “ duct clamp set (inlet)
- 1 set of chains (8-16 mm)
- Control valve for DuctRod RAPID
FREMCO 101-190911002 NANOFLOW MAX Fiber Blower
NANOFLOW MAX
- Small but powerful fiber blowing machine, which can blow both blown fibre (EPFU) and micro/nano cables. Tested in accordance to IEC standards.
- Fiber/Cable OD: 0.8-4.5 mm
- Duct size OD: 3.0-12.7 mm
- Preparation time: 3 min
- Blowing distance: up to 3,940 feet
INCLUDES:
- Filter and water separator
- 2pcs. 24v, 2Ah Lithium-ion battery and battery charger (US socket)
- MAX steel drive wheel for fiber size 0.8-3 mm
- 2 x drive for fiber sizes 0.8-3 mm
- 1 adaptor plate set chosen from the adapter plate kit
Condux 08675702 Portable 13HP Hydraulic Power Pack
This portable power source is matched perfectly to the requirements for the Condux Fiber Optic Cable Blower and Puller. Utilizing a small footprint, the 13hp Power Pack features a variable flow switch (from 5gpm to 8gpm) to ensure that every job can be covered with just one machine.
GMP 32800 Hydraulic Power Pack
GMP 89003 TORNADO
Designed to be safe, fast and effective, even on tough terrain, the "Tornado" cable blowing machine will move fiber optic cable of 0.23 to 1.25 in. (5.84-32 mm) diameter at speeds to 300 ft./min. (90 m/min.) into pre-installed innerduct or direct-buried duct. It can accommodate innerduct from .47 to 2.48 in. (12-63 mm). A conversion kit allows the Tornado to place 12.7/10mm, 12/10mm or 10/8mm micro duct into the innerduct.
250 CFM COMPRESSOR AFTERCOOLER GMP 89060 - Special Order
The 250CFM Compressor Aftercooler has been designed to cool compressed air and remove water droplets prior to entering a GMP Cable Blowing Machine.Features a heavy-duty moisture separator and coalescing filter to trap moisture and condensed oil.
FREMCO 101-240202000 PICOFLOW RAPID Fiber Blower
PICOFLOW RAPID Handheld fiber blowing machine for FTTH fibers and micro cables up to 3 mm
Includes:
- • Sponges 5 mm, 8 mm and 12 mm
- • 3 x Coupling part
- • Mounting bracket + 2 screws
- • Ball valve connection
- • 2 x drive wheel and 1 follower wheel for fiber sizes 0.8-3 mm
- • Duct adaptors for 3, 5, 7, 8, 8.5, 10, 12 and 12.7 mm (OD)
- • Quality transport box
Condux 08030003 Power Dart® Blower
The Condux Power Dart Blower Is a pneumatic rodding system especially suited for long duct runs. A three-motor system allows you to choose the right speed for your needs. With all three motors engaged, it will deliver up to 300 cfm (8.5 m3/min) of
air at 3 psi (.2 bar) max. pressure, easily blowing 1⁄2" (13 mm) poly line or
measuring tape over 2,000 feet (610 m) in conduit up to 6 inches (152 mm) in diameter.
Parts: 
Carrier Kit for Power Dart® Blower Condux 08030011Requires a 3,000 watt generator 110 Volt model includes a 30 amp twist plug adapter.
FIBER OPTIC CABLE EZ-EXIT GMP 90060
The fiber optic cable EZ-Exit tool eliminates damage to your fiber by easily guiding fiber optic cable past the sharp edges of a manhole chimney. The easy clamping feature allows the tool to be quickly installed in less than 30 seconds, reducing the total setup time of a fiber pull. Provides a rigid, low friction shoe that guides fiber over the sharp edges at the top and bottom of a manhole chimney while maintaining a bend diameter of 45” to accommodate up to some of the largest fiber cables.
GMP AIRSTREAM Tube Collect and Clamp Assemblies
In order to customize your new "Air Stream" to your application, we ask that you pick, one each from the lists below, the Tube Collet and Clamp Assembly P/N, the Cable Guide Assembly P/N and the Cable Collet Assembly P/N.
TUBE COLLET AND CLAMP ASSEMBLIES
Head Cable Guide 8.0mm D GMP 74100
GMP 74100, Brass Cable Guiding Heads, are screwed on to the end of the cable to reduce friction during cable blowing. these bullet heads are constructed of corrosion resistant brass and made for repeated use.
Size OD: 8mm (0.32")
List Price: $201.84
Our Price: $178.09
You save $23.75!
Condux 08676844 SpeedBall Split Coupling
CONDUX 08676844 Speed Ball Split Coupling
Hinged aluminum split coupling for temporarily joining all types on innerduct during a cable blowing process.
Inserts are sold separately
Head Cable Guide 7mm D GMP 74099
GMP 74099, Brass Cable Guiding Heads, are screwed on to the end of the cable to reduce friction during cable blowing. these bullet heads are constructed of corrosion resistant brass and made for repeated use.
Size OD: 7mm (0.28")
List Price: $170.55
Our Price: $151.67
You save $18.88!
Head Cable Guide 6.0mm D GMP 74097
GMP 74097, Brass Cable Guiding Heads, are screwed on to the end of the cable to reduce friction during cable blowing. these bullet heads are constructed of corrosion resistant brass and made for repeated use.
Size OD: 6mm (0.24")
List Price: $159.47
Our Price: $140.71
You save $18.76!
Condux 08761424 Cable Seal for Gulfstream™ 400
Replacement Cable Seal for Fiber Optic Cable Blowers are sold in pack of 4.
Cable Diameter: 0.35-.42
These seals work the the appropriate Cable Venturi for the following blower models:
HD Blower
Deluxe Lightweight Blower
Mini-Blower/Pusher
Condux 08761435 Cable Seal for Gulfstream™ 400
Replacement Cable Seal for Fiber Optic Cable Blowers are sold in pack of 4.
Cable Diameter: 1.05-1.13
These seals work the the appropriate Cable Venturi for the following blower models:
HD Blower
Deluxe Lightweight Blower
Mini-Blower/Pusher
GMP AIRSTREAM Cable Guide Assemblies
In order to customize your new "Air Stream" to your application, we ask that you pick, one each from the lists below, the Tube Collet and Clamp Assembly P/N, the Cable Guide Assembly P/N and the Cable Collet Assembly P/N.
CABLE GUIDE ASSEMBLIES
GMP AIRSTREAM Spare Cable Seal (5 Pack)
In order to customize your new "Air Stream" to your application, we ask that you pick, one each from the lists below, the Tube Collet and Clamp Assembly P/N, the Cable Guide Assembly P/N and the Cable Collet Assembly P/N.
SPARE CABLE SEAL (5 Pack)
Polywater® HS-128 HydraSol® Cable Gel Remover 1gl
HydraSol® Remover softens, removes and suspends cable filling greases. The solvent remains active and is only slowly "used up." HydraSol® Remover is good for multiple cleaning for economy and efficiency.
Polywater® HS-32 HydraSol® Cable Gel Remover 1-quarter Bottle
HydraSol® Remover softens, removes and suspends cable filling greases. The solvent remains active and is only slowly "used up." HydraSol® Remover is good for multiple cleaning for economy and efficiency. 1-quart /0.95-liter bottle with flip-top cap
GMP AIRSTREAM Spare Tube Seal O Ring (5 Pack)
In order to customize your new "Air Stream" to your application, we ask that you pick, one each from the lists below, the Tube Collet and Clamp Assembly P/N, the Cable Guide Assembly P/N and the Cable Collet Assembly P/N.
SPARE TUBE SEAL O RING (5 Pack)
Straight Micro Coupler 8.5/6MM Dura Line 20001834
STRAIGHT COUPLERS
• Easy assembly/disassembly, no tools required, low profile design
• Provide an air and water tight connection
• Designed and tested to meet or exceed industry standards
• Color coded to easily identify by size
• Available for all Microduct sizes 5mm–27mm
• Specially designed to ensure a smooth interior transition
• Withstand chemical and harsh environment conditions
• "HD" or "Heavy Duty" denotes enhanced pull-out and pressure characteristics
(currently size 18/10 next page)
