Electronic Marker Locator TEMPO EML100
The Marker-Mate Electronic Marker Locator (EML-100) is designed to locate buried electronic markers, including Tempo OmniMarker™ and UniMarker™ models at industry standard frequencies. With the updated capability of detecting nine different electronic marker types simultaneously, when in “scan” mode (power, European power, water, sanitary, telephone, fiber optic, gas, cable TV, non-potable water).
Select Spike Marker Model
SELECT OmniMarker II MODEL
Fiber Identifier Kit TEMPO FI-100
The FI-100 fiber identifier allows the technician to quickly determine the approximate core power and signal direction in a fiber optic cable without disconnecting the fiber. Tone detect technology is employed so that the technician can uniquely trace signals once again without disconnecting fibers with potentially critical services.
FIBER IDENTIFIER + 4 FIBER CHUCKS
Gas Powered Fiber Cable Puller 50cc 4 Stroke TUF-Lugger Lite Cable Puller DCD 42700-000
Special Order Item - Please call to order
TUF-Lugger Lite Cable Puller The Fiber Cable puller is a simple, easy to use cable puller that is
designed to accommodate industry standard sheaves of 9”, 12”, 30", or
40” diameter specifically intended for use with fiber optic cables
requiring a minimum bend radius. The unit is powered by the TUF-Lugger
Lite gas winch (41000-000) or by the TUF-Lugger Lite electric winch
(41000-500), providing a gas or electric option as a simpler, lighter,
less costly option than a typical hydraulic puller.
Capstan sold separately
Hastings TEL-O-POLE Hot Stick and Measuring Stick
Measures pole heights and conductor clearances from the ground. Universal end fitting on the insulated top section accepts a wide variety of attachments so that the lineman can disconnect switches, replace cut out tubes and reclose, remove pole covers, prune trees, etc., with one tool.
JONARD JIC-195 Stainless Steel Communication Scissors
Designed for telecom and electrical applications, these heavy duty scissors are the perfect tool for cutting cables up to 1/4” diameter and for other objects as well.
These scissors feature the following:
- One blade is serrated for a tight and secure grip while cutting
- High carbon stainless steel blades for maximum strength and durability
- Two stripping notches included for stripping 18-20 AWG and 22-24 AWG wires
- Dual component nylon and Santoprene™ grip for greater comfort and ergonomics
- Adjustable screw underneath hinge cap to configure blades to your needs
JONARD RDG-30 - 30 ft Glow Rod Kit, 3/16" Diameter
JONARD RDG-30 - 30FT GLOW ROD KIT 3/16" DIAMETER
30' Glow Rod Kit 3/16" Diameter extends a full 30 feet. These glow rods are designed to provide splinter free use over the life of the product while also providing excellent flexibility. The luminescence of the rods is brighter and lasts longer than the competition.
JONARD RDT-18 Telescoping Pole, 18 ft (24 ft Total Reach)
Pole extends 18 feet (5.58 meters) for an average of 24 feet arms-length reach while providing more control and accuracy than its competitors, this telescoping pole is perfect for installing or retrieving cables in drop ceilings or other hard to reach places.
Micro Optical Power Meter TEMPO OPM210
Micro Optical Power Meters (OPM210 and OPM220) are available in standard and high-power versions for the Telco and MSO markets. Absolute and referenced power measurements ensure fast and accurate loss budget and insertion loss measurements. When placing tones on the fiber using a Tempo Communications source provides the optical power meter will definitively identify fiber optic cables.
Optical Fusion Cleaver TEMPO FCL200
The FCL200 cleaver provides fast and accurate cleaves that can be used with any fusion splicer and for preparing fibers for use with mechanical connectors.
When the fixed clamp is installed the fiber is securely held in place and is capable of cleaving 200 micron, 250 micron, 900 micron, 3mm, ribbon and bowtie fibers. The dust bin automatically collects all fiber end cuts for safe disposal with its spring driven mechanism.
Optical Fusion Splicer TEMPO FSP200-KIT1
The FSP200 optical fusion splicer uses core alignment technology, which allows the technician to reliably fuse fiber optic cables with low splice losses in as little time as seven seconds. Provides a low loss, low return loss, and reliable connection that surpasses the failure prone mechanical connector. Splice on connectors also allow for easier fiber routing, which reduces fiber preparation since the splice on connector is pre-cleaved and also eliminates the need for a splice tray.
FSP200-KIT1 includes
FSP200 fusion splicer
FCL200 cleaver.
Optical Time-Domain Reflectometer TEMPO OFL100 OTDR
The OFL100 OTDR enables the front-line fiber technician to quickly locate loss events in the last mile of the FTTx network. The convenient touchscreen provides an intuitive interface for even newly provisioned technicians making it simple to locate loss events such as cut fibers, contaminated or damaged connectors, and excessively bent fibers.
Pulser Fault Locator TEMPO PE2003-G
Pulser Ground Fault Locator identifies the exact location of even the smallest breaks in insulation by “pulsing” a high-voltage signal that radiates into the earth at the location of the faults. With the A-frame mounted receiver, a visual analog meter points the way to the source of the voltage.
Tracker II Cable Locator TEMPO 501
Tracker II can be used on active or dead systems. Now you can trace the path and determine the depth of buried wires, cables, and metallic pipes or conduit and find the ends of a cut cable without having to deactivate the systems.
