Slingco TPE09682 Utility Pole Stand Framing and Installation
Slingco makes utility pole framing and installation easier and more cost-effective than ever.
Slingco stores flat on any work vehicle and — with a few twists — transforms into the industry's most helpful device. Whether you're performing regularly scheduled pole replacement or if you're reacting to a natural disaster, Slingco gets the job done safer, faster and easy.
COMPACT: Folds to 3” x 23” x 30” for easy storage.
LIGHTWEIGHT: Only weighs 33 pounds.
STRONG: Supports poles from 30’ to 70’.
STABLE: Stays put on even and uneven ground.
Poleprop Utility Pole Framing
POLE WRAP BPW-KIT H-BROOK
Designed to eliminates damage caused by woodpeckers, Brooks Wrap was developed out of a two part polyurea coating process. For some time. Brooks Manufacturing has been using this specialized coating to protect against woodpecker damage to distribution cross-arms.
GUY GUARD MARKER YELLOW W/TIE H-EMC-96F70-7YTIE-YE
EMC Guy Markers (Guy Guards) are made of high impact UV stabilized plastic and provides durable, high impact, economical protection for exposed utility pole guy wires, dead end fittings, and anchor rods. In addition, our Guy Markers are used on towers that utilize guy wires, such as, cell phone towers or other communication towers.
U GUARD EMC PLASTIC RISER BOOT 4-6" PEAD4-6P
U GUARD H-EMC PLASTIC RISER BOOT FITS 4-6" U-GUARD.
U-Guard™ – PlasticElectrical Materials Company plastic U-Guards™ (risers) are designed to give non-conductive, high impact protection for utility power and communication cables installed vertically on poles.
The EMC U-Guard™ offers excellent impact strength and weather-ability over a temperature range greater than any other non-conductive riser material.
U GUARD EMC PLASTIC RISER BOOT 4-6" PEAD4-6P
U GUARD EMC PLASTIC RISER BOOT 2-4" PEAD-4P
U GUARD H-EMC PLASTIC RISER BOOT FITS 2-4" U-GUARD.
U-Guard™ – PlasticElectrical Materials Company plastic U-Guards™ (risers) are designed to give non-conductive, high impact protection for utility power and communication cables installed vertically on poles.
The EMC U-Guard™ offers excellent impact strength and weather-ability over a temperature range greater than any other non-conductive riser material.
U GUARD EMC PLASTIC RISER BOOT 2-4" PEAD-4P
U GUARD EMC PLASTIC RISER BOOT 2-6" PEAD2-6
U GUARD H-EMC PLASTIC RISER BOOT FITS 2-6" U-GUARD.
U-Guard™ – PlasticElectrical Materials Company plastic U-Guards™ (risers) are designed to give non-conductive, high impact protection for utility power and communication cables installed vertically on poles.
The EMC U-Guard™ offers excellent impact strength and weather-ability over a temperature range greater than any other non-conductive riser material.
U GUARD EMC PLASTIC RISER BOOT 2-6" PEAD2-6
U GUARD EMC PLASTIC RISER BOOT 2-6" PEAD-6P
U GUARD H-EMC PLASTIC RISER BOOT FITS 2-6" U-GUARD.
U-Guard™ – PlasticElectrical Materials Company plastic U-Guards™ (risers) are designed to give non-conductive, high impact protection for utility power and communication cables installed vertically on poles.
The EMC U-Guard™ offers excellent impact strength and weather-ability over a temperature range greater than any other non-conductive riser material.
U GUARD EMC PLASTIC RISER BOOT 2-6" PEAD-6P
Tree Guard Box Guard D Type for Ringed Cable GMP 65037
These durable 2ft . Long Southern Pine Tree guards Box Guard come come
in 2 different styles to protect lashed or ringed lashed or ringed cable
from the damage that swaying tree branches can cause. Each guard is
preservative-treated to ward off rot. GMP 65037 Tree Guard Box Guard Normal Guard Size 2 3/8in
Maximum Cable Size 2in
Tree Guard Box Guard L Type for Lashed Cable GMP 65038
These durable 2ft. Long southern Pine Tree guards Box Guards come in 2
different styles to protect lashed or ringed cable from the damage that
swaying tree brances can cause. Each guard is preservative-treated to
ward off rot.GMP 65038 Tree Guard Box Guard Normal Guard Size 3in
Maximum Cable Size 2.58
Tree Guard Box Guard L Type for Lashed Cable GMP 65036
These durable 2ft. Long southern Pine Tree guards Box Guard come in 2
different styles to protect lashed or ringed cable from the damage that
swaying tree brances can cause. Each guard is preservative-treated to
ward off rot. GMP 65036 Normal guard size 1 3/4in
Maximum Cable Size 1 3/8in
H-PLUG 11/16 X 2" POLE PLUG
Tight fitting plugs should be placed into all the inspection and treatment holes that are placed
into the pole during an inspection. Treated wood plugs are also used to fill abandoned
bolt-holes in the above ground portion of the pole. Utility companies often move cross arms
or reconfigured wood pole lines during their long service life. Leaving these holes open
can allow for above ground decay or insect attack to develop. 11/16 x 2"BUTT PLUG
H-PLUG 13/16 X 2" POLE PLUG
Tight fitting plugs should be placed into all the inspection and treatment holes that are placed
into the pole during an inspection. Treated wood plugs are also used to fill abandoned
bolt-holes in the above ground portion of the pole. Utility companies often move cross arms
or reconfigured wood pole lines during their long service life. Leaving these holes open
can allow for above ground decay or insect attack to develop.13/16 x 2"BUTT PLUG
Pole Topper® Pole Top Protection OSMOSE
Pole Topper®
Pole Toppers create a durable, long-lasting barrier against moisture and sunlight that helps to maintain structural stability and preservative retention. They adhere to virtually any shape pole and can be installed in minutes without hardware or tools.
- Available in three sizes to fit both distribution and transmission poles
- Highly resistant to UV degradation and weathering
- Installation requires no metal fasteners
- Adheres strongly to wood and to itself
- Forms easily around existing hardware on in-service poles
- Clean and dry to the touch
- New "pull tab" backing allows for easy installation even while wearing lineman's gloves
- Conveniently packaged ten to a box which can be easily stored on line trucks
- RUS accepted for new pole construction
Pole Toppers are available in four sizes:
| Diameter | Pole Class |
|---|
| 12" | 6 and smaller |
| 16" | 3, 4, 5 |
OSMOSE 70-110-020-012 -12” Pole Topper fits Class 6 poles and smaller
OSMOSE 70-110-020-016 - 16” Pole Topper fits Class 5, 4, and 3 poles
Guy Guard Marker 8' Yellow PLP-PG5718P
The PREFORMED™ Guy Marker is designed to identify down guys or other wire and cable
installations where anchoring devices are exposed to pedestrian and/or vehicular traffic.
The Guy Marker comes in four different profiles with five attachment combinations.
Manufactured out of Polyethylene or PVC Premium UV inhibitors for long life span.
Guy Guards: Guard Type - Guy Marker; Tube Profile - Full Round; Material - Polyethylene; Finish - Yellow; Diameter - in - 1.50; Guard Length - ft - 8; Attachments - Helical Pig-Tail, Short Lock Strap;
Features: Lightweight.Easily installed on strand sizes ranging from 3/16" – 1/2" (4.7 – 12.7 mm).Installs on down guys in seconds.
Guy Guard Marker 8' Yellow H-96FRPM-PLP-PG5718P
Preformed Tree Guard 1" X 6' PTG0203 (black)
Tree Guards are designed to protect bare conductors, fabric-covered or plastic-covered cables and fiber optic cables against mechanical abrasion caused by tree limbs or other obstructions.
Preformed Tree Guard 2" X 6' PTG0207
Preformed Tree Guards are designed to protect bare conductors, fabric-covered or plastic-covered cables and fiber optic cables against mechanical abrasion caused by tree limbs or other obstructions.
Preformed Tree Guard 3" X 6' PTG0208
Preformed Tree Guards are designed to protect bare conductors, fabric-covered or plastic-covered cables and fiber optic cables against mechanical abrasion caused by tree limbs or other obstructions.
Guy Guard Marker 8' Yellow Hubbell 96FRPMYEL
The Hubbell Full round yellow Guy Marker 1-1/2" x 8' long. A unique strand trapping design has been added to the security of a concealed pigtail and a self-locking nylon strap. Fit guy strand diameters from 3 /16"to 1 /2".
TIIGER 1025A Two-Wheel Pole Dolly Capacity 2,200 lbs.
SPECIAL ORDER ITEM
The TiiGER® Two-Wheel Pole Dolly is equipped with a high capacity roller cradle for easy transportation of poles in excess of 2,000 lbs. Large low-pressure turf tires handle any terrain and the portable design allows for quick Load Deck attachment. Designed with 180° steering for forward | backward and side-to-side motion.
