Pole Step J1118 5/8"x10"
The Pole Step has rolled fetter drive threads and a wide, flat driving surface make installation fast and easy. A knurled ring indicates the proper driving depth
5/8"x10"; Hot Dip Galvanized.
Pole Plate & Lag Screw (Butt Step) J6235
Mount with Lag Screw is used as a foothold below the first permanent step on wood utility poles. Two or more of these steps are used to assist linemen in gaining access to permanent steps at higher levels. Used with H-J6236
H-8650 ALLIED POLE STEP 3/4"x14"
3/4" Pole Step H-8650. The utility Pole Step has rolled fetter drive threads and a wide, flat driving surface make installation fast and easy. A knurled ring indicates the proper driving depth. H-8650 ALLIED POLE STEP 3/4"x14". The Fetter thread length is 4-3/4", it has a Hot dip galvanized to meet ASTM Specification A153.
DETACHABLE POLE STEP H-J6236-ALLIED-844
Detachable Pole Step fits over Mount with Lag Screw to provide the first permanent step on wood utility poles. Two or more of these steps are used to assist linemen in gaining access to permanent steps at highest levels.
Steps are upturned and the inner end is perfectly sized to engage mounting plates.
Manufactured from AISI 1018 Steel.
Hot dip galvanized to meet ASTM Specification A153.
USE WITH POLE PLATE/W LAG SCREW H-J6235
Fiberglass Pole Step for 10" Pole w/ Round Washer Allied Bolt 6507
- Used for climbing a fiberglass utility pole.
- Fiberglass pole step is used in lieu of the B pole step on composite poles.
- Fiberglass pole step is formed from high-strength AISI 1018 steel.
- Each step is equipped with a welded washer to act as a stop, one loose round washer, and two nuts prevent loosening over time.
- Hot dip galvanized to meet ASTM Specification A153.
POLE STEP SI-0041 HOLLOW STEEL POLE STEP COMPLETE UNIT
Removable Pole Step Complete Part Number: SI-0041
Combines SI-0047 and SI-0048 in one package
Designed for use on 10" steel diameter poles, 7 gage wall or 12" to 20" fiberglass diameter poles, 3/8" wall thickness
Rugged and reliable
Easy to install
Patented
POLE STEP SI-0040 HOLLOW STEEL POLE
Pole Step Hollow Pole
Pole Step
Part Number: SI-0040
For use with steel or composite poles
All stainless steel design
Rugged and reliable
Mounts into a 13/16" diameter hole
Designed for use on 10" steel diameter poles, 7 gage wall or 12" to 20" fiberglass diameter poles, 3/8" wall thickness
Captive design prevents the dropping of loose parts during installation
Keyed mounting plate provides positive alignment of pole step to pole
Easy to install
Patented
JONARD JIC-650 - LINEMAN BELL WRENCH
Designed with two open-ended wrench heads and an oval hole for turning pole steps, this Bell System Type wrench is perfect for telecom and datacom work applications.
Milwaukee 49-66-5131 Lineman's Pole Step Socket
SHOCKWAVE Lineman's Pole Step Socket
Key Features
- Engineered to be the easiest way to remove 5/8" pole steps from wooden utility poles
- Quick Insert Slot Geometry allows for the easiest set up on the hardware
- Hardware hook reduces hardware drops
- Rounded edges for safer hardware removal
- Designed for use with 5/8" pole steps
- Can be used to install with a pre-drilled hole
- 7/16" to 1/2" Lineman's Impact Socket Adapter included
- 1/2" Square Drive
- Features a pin detent hole for locking onto pin detent tools and adapters
5/8 Impact J Hook Puller - Reliable BJH-1-5-8
J Hook Puller 5/8 Impact
5/8" Impact "J" Hook Puller. For easy installation and removal of "J" Hooks. Heavy-Duty construction permits faster driving and extraction of J Hooks. Heat-treated, high-tensile steel, for use in impact wrench.