*Slingco TPE09386 Pole Puller Deluxe
The Slingco Deluxe Pole Puller system includes the pole puller pad and back plate weldment. The pole puller pad has studs which keep the base plate in the optimum position when pulling poles. The back plate weldment has angled teeth to increase hold on the pole during extraction.
Slingco’s pole puller offers a low point of attachment making it easy to remove even broken or cut poles.
- Low point of attachment
- 50,120 lbs lift at max pressure
- Deluxe System complete with back plate weldment & pad
1 -1/2 Ton Web- Strap Chain Hoist with Hot Stick Ring SLINGCO ZLH10524
Load hooks are forged steel with spring-loaded latches. Both top and bottom hooks swivel 360° to allow for unwinding action of rope or stranded cable under tension. For easy hook-up, chain release to freewheel but only under no-load conditions. Controls automatically lock when hoist is pulling a load.
Double Locking Snap Hook Slingco HMI8556
Slingco’s Double Locking Snap Hook has a safe working load limit of 5,000 lb, with a side opening feature allowing quick access to remove the hand line.
Zinc plated for rust resistance this strong Snap Hook requires double pressure points for opening to ensure safety without allowing accidental opening.
Guy Wire Dispenser OD 1/2" SLINGCO ZWM09207
Slingco’s guy wire dispenser is constructed of high strength steel coated in a durable black finish to enable the unit to endure the harsh outdoor environment.
Easy to operate release knobs allow for quick and easy loading and unloading.
Hand Crimper 5/8 Nose Die & Kearney Seat Slingco TCR08735
SLINGCO crimping tools have been designed to provide reliable crimps installing full-tension or non-tension connectors. Mechanical Crimping Tools also have ergonomic handles for comfortable use and maximum leverage when making critical connections.
Handline Block Sheave 3" Slingco ZAB8725
Slingco’s Hand Line Blocks feature a 3" nylon fiberglass block, with a safe working load limit of 1,000 lb.
3" Hand Line Blocks sheave can accommodate a 5/8" diameter rope, and operates smoothly on the 1/2" diameter axle and swivel bearings. The side opening feature allows quick access to remove the hand line.
Reel Lifter 3000Lbs Slingco ZLD08729
Line Pulling Swivels - Stainless Steel SLINGCO ZSW2093
Slingco Reel Lifter is a high capacity, compact unit that allows users in the utility construction industry to safely load, transport, and dispense wire and/or cable on-site.
SAFE WORKING LOAD (lb): 5,000 UNDERGROUND & 3,000 OVERHEAD 4-15/16" LENGTH
List Price: $334.00
Our Price: $312.99
You save $21.01!
Reel Lifter 5000lbs Slingco ZLD09186
Line Pulling Swivels - Stainless Steel SLINGCO ZSW2093
Slingco Reel Lifter is a high capacity, compact unit that allows users in the utility construction industry to safely load, transport, and dispense wire and/or cable on-site.
SAFE WORKING LOAD (lb): 5,000 UNDERGROUND & 3,000 OVERHEAD 4-15/16" LENGTH
List Price: $398.50
Our Price: $375.29
You save $23.21!
Rubber Blanket Clamp Pin Slingco ZPE10962
Blanket Clamp Pins are used to hold insulating blankets and other types of rubber coverups in to place. The extra holes in the center of the body are used to grip conductors and prevent linehose from sliding.
The handles of the pin are shaped to engage into the end ferrule of a clampstick (shotgun stick)
Slingco TPE09682 Utility Pole Stand Framing and Installation
Slingco makes utility pole framing and installation easier and more cost-effective than ever.
Slingco stores flat on any work vehicle and — with a few twists — transforms into the industry's most helpful device. Whether you're performing regularly scheduled pole replacement or if you're reacting to a natural disaster, Slingco gets the job done safer, faster and easy.
COMPACT: Folds to 3” x 23” x 30” for easy storage.
LIGHTWEIGHT: Only weighs 33 pounds.
STRONG: Supports poles from 30’ to 70’.
STABLE: Stays put on even and uneven ground.
Poleprop Utility Pole Framing