5/8 X 10" OVAL EYE BOLT H-J9410
OVAL EYE BOLT H-J9410 5/8 X10"
Eyebolts are forged, one piece design and are commonly used as an attachment point to secure thimbles, clevises, links and deadend insulators. Regular oval eyebolts are supplies with a 4 or 6 inch thread length and one assembled square nut.
Eye I.D. 1-1/2" width x 2" length
5/8 X 12" OVAL EYE BOLT H-J9412
OVAL EYE BOLT H-J9412 5/8 X12"
Eyebolts are forged, one piece design and are commonly used as an attachment point to secure thimbles, clevises, links and deadend insulators. Regular oval eyebolts are supplies with a 4 or 6 inch thread length and one assembled square nut.
Eye I.D. 1-1/2" width x 2" length
5/8 X 14" OVAL EYE BOLT J9414
OVAL EYE BOLT H-J9414 5/8 X14"
Eyebolts are forged, one piece design and are commonly used as an attachment point to secure thimbles, clevises, links and deadend insulators. Regular oval eyebolts are supplies with a 4 or 6 inch thread length and one assembled square nut.
Eye I.D. 1-1/2" width x 2" length
5/8 X 18" OVAL EYE BOLT J9418
OVAL EYE BOLT H-J9418 5/8 X18"
Eyebolts are forged, one piece design and are commonly used as an attachment point to secure thimbles, clevises, links and deadend insulators. Regular oval eyebolts are supplies with a 4 or 6 inch thread length and one assembled square nut.
Eye I.D. 1-1/2" width x 2" length
5/8 X 22" OVAL EYE BOLT J9424
OVAL EYE BOLT H-J9414 5/8 X22"
Eyebolts are forged, one piece design and are commonly used as an attachment point to secure thimbles, clevises, links and deadend insulators. Regular oval eyebolts are supplies with a 4 or 6 inch thread length and one assembled square nut.
- Hot Dip Galvanized
- 6" thread length
- Includes one square nut
- Eye dimensions are 5/8" x 1 1/2" x 2"
- Rated tensile strength is 13,550 lbs.
- Galvanized steel per ASTM A-153
- Manufactrured in compliance with ANSI C135.4 and C135.5
- RUS listed o - Bolt, eye, oval
5/8 X 24" OVAL EYE BOLT J9424
OVAL EYE BOLT H-J9414 5/8 X24"
Eyebolts are forged, one piece design and are commonly used as an attachment point to secure thimbles, clevises, links and deadend insulators. Regular oval eyebolts are supplies with a 4 or 6 inch thread length and one assembled square nut.
- Hot Dip Galvanized
- 6" thread length
- Includes one square nut
- Eye dimensions are 5/8" x 1 1/2" x 2"
- Rated tensile strength is 13,550 lbs.
- Galvanized steel per ASTM A-153
- Manufactrured in compliance with ANSI C135.4 and C135.5
- RUS listed o - Bolt, eye, oval
5/8 x 8" OVAL EYE BOLT H-J9408
OVAL EYE BOLT H-J9408 5/8 X8"
Eyebolts are forged, one piece design and are commonly used as an attachment point to secure thimbles, clevises, links and deadend insulators. Regular oval eyebolts are supplies with a 4 or 6 inch thread length and one assembled square nut.
Eye I.D. 1-1/2" width x 2" length
Angled Thimble Eye Bolt 5/8" X 10" J8151
Eliminates the need for thimbles, shackles, links and guy hooks
The broad radius of the eye provides an excellent attachment point to deadend or guy messenger wire, guy strand or formed wire grips
Forged of high quality steel, hot-dip galvanized
- Minimum thread length is 4".
- Recommended torque value: 73 ft lb.
- Minimum Tensile Strength: 13,550 lbf.
B Cable Suspension Bolt 5/8" X 18" Allied Bolt 8264
Used to secure two cable suspension clamps at opposite sides of utility pole.
- Collars are forged instead of welded for extra strength.
- Bolt provided with cone point at each end to ease starting.
- Hot dip galvanized to meet ASTM Specification F2329.
- Manufacturers mark (ABI) and tensile load designation mark (i.e.10M, 16M, 25M) appear on the unthreaded section of each bolt. ABI marking is registered with the U.S Patent Office per the Fastner Insignia Act.
- Minimum tensile strength: 13,550 lbf.
- Recommended torque value: 73 ft lb.
- Unthreaded section is 6".
Cable Extension Bolt 5/8" x 7" Allied Bolt 2070
Cable Extension Bolt 5/8" x 7" Same as GMP74109
- Allied Bolt 2070 Used for placement of second cable at the same level and side of a pole as the existing cable.
- Cable Extension Bolts are designed to attach to the threaded ends of suspension bolts.
- Internally threaded section is four inches long.
- External threaded section is three inches long.
- Hot dip galvanized to meet ASTM Specification A153.
Carriage Bolt 1/2" x 2" AF 29556
Aluma-Form 29556 Carriage Bolt 1/2" x 2"
The carriage bolts are roll threaded with square shoulder and square nut for Stand Off Bracket
- Supplied Assembled with Square Nut
- Rolled Threads
- Square Shoulder
- Hot dip galvanized to meet ASTM A153
Carriage Bolt 3/8" x 4" J8634
The carriage bolts are roll threaded with square shoulder and square nut.
J834 Carriage Bolt: 3/8" x 4" (Thread Length: 3 ")
Clevis Bolt 5/8" x 10" J7810
Clevis bolts are used to provide deadend connections to eyes or links. Clevis end includes 1/2" diameter machine bolt with nut and a stainless steel self locking cotter pin to provide a secure vibration proof assembly.
Clevis Bolt 5/8" x 12" J7812
Clevis bolts are used to provide deadend connections to eyes or links. Clevis end includes 1/2" diameter machine bolt with nut and a stainless steel self locking cotter pin to provide a secure vibration proof assembly.
Clevis Bolt 5/8" x 14" J7814
Clevis bolts are used to provide deadend connections to eyes or links. Clevis end includes 1/2" diameter machine bolt with nut and a stainless steel self locking cotter pin to provide a secure vibration proof assembly.
Double Arming Bolt 3/4" x 14" J8884
Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.
Double Arming Bolt 3/4" x 16" J8886
Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.
Double Arming Bolt 3/4" x 18" H J8888
Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.
Double Arming Bolt 3/4" x 20" J8890
Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.
Double Arming Bolt 3/4" x 22" H J8892
Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.
Double Arming Bolt 3/4" x 24" H J8894
Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.
Double Arming Bolt 3/4" x 26" H J8896
Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.
Double Arming Bolt 3/4" x 28" J8897
Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.
Double Arming Bolt 3/4" x 30" J8898
Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.
Double Arming Bolt 3/4" x 32" J8899
Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.
Double Arming Bolt 5/8" x 10" J8860
Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts. Length dimensions do not include the points.
Double Arming Bolt 5/8" x 12" J8862
Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts. Length dimensions do not include the points.
Double Arming Bolt 5/8" x 14" J8864
Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.
Double Arming Bolt 5/8" x 16" J8866
Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.
Double Arming Bolt 5/8" x 18" J8868
Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.
Double Arming Bolt 5/8" x 20" J8870
Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.
Double Arming Bolt 5/8" x 22" J8872
Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.
Double Arming Bolt 5/8" x 24" J8874
Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.
Double Arming Bolt 5/8" x 26" J8876
Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.
Double Arming Bolt 5/8" x 28" J8877
Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.
Double Arming Bolt 5/8" x 30" J8878
Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.
Double Arming Bolt 5/8" x 32" J8879
Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.
Double Arming Bolt 5/8" x 34" J8880
Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.
Double Arming Bolt 5/8" x 36" J8881
Double Arming Bolt are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. “D.A.” bolts are furnished with four square nuts.
Reinforce Brace 1-3/8" Allied Bolt 8001
Used to support the outer end of extension bolts when installing a parallel line to existing aerial plant.
- The distance between the Suspension Clamp and the above mounting hole is 8-3/4".
- Stock size is 1/8" x 1-3/8".
- Stamped from AISI 1018 steel.
- Hot dip galvanized to meet ASTM Specification B695.
Reinforcing Strap 1/8" x 1-3/4" J7905
Reinforcing Straps support the messenger bolt at locations of heavier than normal loading stress, such as long spans and are used with cable suspension clamps. The lower hole fits over the messenger bolt and the top end is fastened to the pole with a lag screw.
- Used in aerial construction as an added support for three-bolt suspension clamps.
- Stock size is .125 x 1-3/8".
- The distance between the Suspension Clamp and the above mounting hole is 5-7/8".
- Mounting hole diameters are both 11/16".
- Stamped from AISI 1018 steel.
- Hot dip galvanized to meet ASTM Specification B695.
Reinforcing Strap 1/8" x 2" J7908
Reinforcing Straps support the messenger bolt at locations of heavier than normal loading stress, such as long spans and are used with cable suspension clamps. The lower hole fits over the messenger bolt and the top end is fastened to the pole with a lag screw.
- Used in aerial construction as an added support for three-bolt suspension clamps.
- Stock size is .125" x 2".
- The distance between the Suspension Clamp and mounting hole is 5-7/8".
- Hole diameters are 11/16" and 25/32".
- Stamped from AISI 1018 steel.
- Hot dip galvanized to meet ASTM Specification B695.
Square Head Machine Bolt with Nut 1" X 16" Allied Bolt 8294
Used for fastening poleline hardware to crossarms, poles, and other structures.
- Has a formed "cone point" to ease attachment of nut.
- Allied Bolt marking (ABI) appears on the head of each bolt.
- Hot dip galvanized to meet ASTM Specification F2329.
- Supplied with attached square nut.
- Minimum tensile strength: 36,350 lbf.
- Recommended torque value: 314 ft lb.
- Minimum thread length is 6".
- Material conforms to ASTM specification A307.
- Dimensions conform to ASME B18.2.1.
Square Head Machine Bolt with Nut 1" X 18" 8297
Used for fastening poleline hardware to crossarms, poles, and other structures.
- Has a formed "cone point" to ease attachment of nut.
- Allied Bolt marking (AB) appears on the head of each bolt.
- Hot dip galvanized to meet ASTM Specification A153.
- Supplied with attached square nut.
- Minimum tensile strength: 36,350 lbf.
- Recommended torque value: 314 ft lb.
- Minimum thread length is 6".
Machine Bolt Square Head 1" X 18" H-8297
Square Head Machine Bolt with Nut 1/2" X 10" J8710
Used for fastening poleline hardware to crossarms, poles, and other structures.
- Has a formed "cone point" to ease attachment of nut.
- Allied Bolt marking (ABI) appears on the head of each bolt.
- Hot dip galvanized to meet ASTM Specification F2329.
- Supplied with attached square nut.
- Minimum tensile strength: 8,500 lbf.
- Recommended torque value: 37 ft lb.
- Minimum thread length is 6".
- Material conforms to ASTM specification A307.
- Dimensions conform to ASME B18.2.1.
Square Head Machine Bolt with Nut 1/2" X 12"J8712
Used for fastening poleline hardware to crossarms, poles, and other structures.
- Has a formed "cone point" to ease attachment of nut.
- Allied Bolt marking (ABI) appears on the head of each bolt.
- Hot dip galvanized to meet ASTM Specification F2329.
- Supplied with attached square nut.
- Minimum tensile strength: 8,500 lbf.
- Recommended torque value: 37 ft lb.
- Minimum thread length is 6".
- Material conforms to ASTM specification A307.
- Dimensions conform to ASME B18.2.1.
Square Head Machine Bolt with Nut 1/2" X 14" J8714
Used for fastening poleline hardware to crossarms, poles, and other structures.
- Has a formed "cone point" to ease attachment of nut.
- Allied Bolt marking (ABI) appears on the head of each bolt.
- Hot dip galvanized to meet ASTM Specification F2329.
- Supplied with attached square nut.
- Minimum tensile strength: 8,500 lbf.
- Recommended torque value: 37 ft lb.
- Minimum thread length is 6".
- Material conforms to ASTM specification A307.
- Dimensions conform to ASME B18.2.1.
Machine Bolt Square Head 1/2" X 14" H-8714
Square Head Machine Bolt with Nut 1/2" X 16"J8716
Used for fastening poleline hardware to crossarms, poles, and other structures.
- Has a formed "cone point" to ease attachment of nut.
- Allied Bolt marking (ABI) appears on the head of each bolt.
- Hot dip galvanized to meet ASTM Specification F2329.
- Supplied with attached square nut.
- Minimum tensile strength: 8,500 lbf.
- Recommended torque value: 37 ft lb.
- Minimum thread length is 6".
- Material conforms to ASTM specification A307.
- Dimensions conform to ASME B18.2.1.
Machine Bolt Square Head 1/2" X 16" H-8716
Square Head Machine Bolt with Nut 1/2" X 6" J8706
Used for fastening poleline hardware to crossarms, poles, and other structures.
- Has a formed "cone point" to ease attachment of nut.
- Allied Bolt marking (ABI) appears on the head of each bolt.
- Hot dip galvanized to meet ASTM Specification F2329.
- Supplied with attached square nut.
- Minimum tensile strength: 8,500 lbf.
- Recommended torque value: 37 ft lb.
- Minimum thread length is 6".
- Material conforms to ASTM specification A307.
- Dimensions conform to ASME B18.2.1.
Square Head Machine Bolt with Nut 1/2" X 8" J8708
Used for fastening poleline hardware to crossarms, poles, and other structures.
- Has a formed "cone point" to ease attachment of nut.
- Allied Bolt marking (ABI) appears on the head of each bolt.
- Hot dip galvanized to meet ASTM Specification F2329.
- Supplied with attached square nut.
- Minimum tensile strength: 8,500 lbf.
- Recommended torque value: 37 ft lb.
- Minimum thread length is 6".
- Material conforms to ASTM specification A307.
- Dimensions conform to ASME B18.2.1.
Square Head Machine Bolt with Nut 3/4" x 10" MSI J8910
Used for fastening poleline hardware to crossarms, poles, and other structures.
- Has a formed "cone point" to ease attachment of nut.
- Allied Bolt marking (ABI) appears on the head of each bolt.
- Hot dip galvanized to meet ASTM Specification F2329.
- Supplied with attached square nut.
- Minimum tensile strength: 20,050 lbf.
- Recommended torque value: 130 ft lb.
- Minimum thread length is 6".
- Material conforms to ASTM specification A307.
- Dimensions conform to ASME B18.2.1.
Allied Bolt 8240 3/4" x 10" Square Head Machine Bolt with Nut
Square Head Machine Bolt with Nut 3/4" x 12" MSI J8912
Used for fastening poleline hardware to crossarms, poles, and other structures.
- Has a formed "cone point" to ease attachment of nut.
- Allied Bolt marking (ABI) appears on the head of each bolt.
- Hot dip galvanized to meet ASTM Specification F2329.
- Supplied with attached square nut.
- Minimum tensile strength: 20,050 lbf.
- Recommended torque value: 130 ft lb.
- Minimum thread length is 6".
- Material conforms to ASTM specification A307.
- Dimensions conform to ASME B18.2.1.
Hubbell 8912 BOLT, MACHINE, SQ HEAD, 3/4in x 12in,
