SAFECUT KCJ-XC Microduct Cutter/Slitter
Slits microduct use with ring cutter.

Microduct Cutter

• Cleanly cuts up to 3/4 in. (19mm) mi-croduct.
  The replaceable hardened steel
• The replaceable hardened steelblade mounted in a sturdy plastic housing.
• Just align the microduct with the blade and the “V” anvil and squeeze

The RCS-144(Round Cable Stripper)is designed for fast, safe, and precise jacket removal of PE, PVC, rubber, and other jackets.
For smaller diameter cables: 0.178 to 1.14 in. (4.5 – 29 mm).

The Jonard CableSaber™ is the ultimate tool for gaining mid-span access to armored or thick jacketed cables 4 mm-28.6 mm (0.157”-1.125”) in diameter.

CONDUX offers two sizer of the Stripper/Slitter for easy and rapid preparation of round cables from .18 (5mm) up to 1.42"(36mm) in diameter and 8 AWG up to 500kcmil.

Designed to provide easy access to optical fibers in loose buffer tubes 1.2mm - 3.3 mm diameter. With 6 precision grooves buffer tube slitting is done without damage to the fiber. The blades are replaceable.

• L-shaped hardened steel guide and blade guard are specially designed to allow the tool to slit open jackets while protecting the buffer tubes and fiber inside the cable
• The slitter blade is located at the top of the tool, has 1/4” of the blade exposed, and is held in place by the 3/4” L-shaped steel guide (longer guide than the JIC-4377)
• The Ringer portion of the tool is located on the back of the handle and uses a spring steel cable holder to hold the cable in place. This holder also has a sliding metal tensioner to increase the force on the cable and help ensure the jacket is cut all the way through
• Ringer can be used on 3/16"-1/2" (4.7 mm-12.7 mm) diameter cables and cuts through plastic, rubber, or fabric insulation sheathing with 0.031” (0.787 mm) or 0.018" (0.457 mm) thickness

• Patented stripping mechanism strips smoothly and efficiently every time
• Strips insulation off single and multi-stranded wires and can strip multiple wires of the same gauge simultaneously
• Strip length can be adjusted manually up to 15 mm (0.591")
• Wire cutter cuts wires as large as 14 AWG cleanly and easily
• Ergonomically designed to minimize hand fatigue during prolonged use
• High-quality laminated carbon steel stripping blades last over 30,000 strips and the tool has a life expectancy of over 150,000 uses

All you have to do is hold the block of the slitter parallel to the strand and draw it along the cable and....

The patented MS-306 Mid Span Slit and Ring Tool is designed to provide easy access to optical fibers in outer jackets and buffer tubes. Building on the popularity of the Jonard Tools MS-6 and MS-26 Fiber Optic Mid Span Slitting Tools, we have incorporated a ring feature in the tool to make it even more versatile.

Groove Sizes:

Groove Sizes:

2.9-3.6 mm

3.6-4.4 mm

4.4-5.2 mm

5.2-6.0 mm

6.0-6.8 mm

Groove Sizes:

7.9-8.2 mm

10.7-11.0 mm

Works with cable from 1/2" to 4". Ratchet design is safer for both user & cable compared to sheath knives...

GMP created ZIDS to give users a quick and easy duct cutting experience, being that the ZIDS Tool is 5 times faster than traditional methods. The tool can easily cut through half-inch pipe walls with minimal effort, as well as provide the user with an efficient method of duct slitting. The tool’s ability to cut in any direction and with a high speed of up to 25,000 RPM furthers the efficiency aspect. The ZIDS Tool is patent pending in regards to the protective nature of the product that prevents fiber damage when in use, but the primary factor that distinguishes it from other duct splitters is the 5/16” cutting diameter, which furthers the value behind the ZIDS Tool.

Replacement blades for the TurboSlitter™ from Condux, a cordless drill attachment that can easily split HDPE pipe with wall thicknesses ranging from 0.097 to 0.216 inches! The cordless drill attachment quickly adjusts to fit almost any rechargeable drill, 14-volt and larger. Save time and effort on the job with the TurboSlitter from Condux.

Condux Innerduct Slitter REPLACEMENT BLADES for 08013101

All you have to do is hold the block of the slitter parallel to the strand and draw it along the cable and....

The Jonard CableSaber™ is the ultimate tool for gaining mid-span access to armored or thick jacketed cables 4 mm-28.6 mm (0.157”-1.125”) in diameter.

Designed for proper cable preparation.

• Ideal combination tool effectively slits messengered web & shaves the residual web material from the cable jacket for proper cable preparation
• Spring-loaded blade shield design secures the blade to the tray & ensures safety during use
• Shaving blade can be field-adjusted while the slitting blade is fixed & factory-set

Designed for proper cable preparation.

• Ideal combination tool effectively slits messengered web & shaves the residual web material from the cable jacket for proper cable preparation
• Spring-loaded blade shield design secures the blade to the tray & ensures safety during use
• Shaving blade can be field-adjusted while the slitting blade is fixed & factory-set

Designed for proper cable preparation.

• Ideal combination tool effectively slits messengered web & shaves the residual web material from the cable jacket for proper cable preparation
• Spring-loaded blade shield design secures the blade to the tray & ensures safety during use
• Shaving blade can be field-adjusted while the slitting blade is fixed & factory-set

Designed for proper cable preparation.

• Ideal combination tool effectively slits messengered web & shaves the residual web material from the cable jacket for proper cable preparation
• Spring-loaded blade shield design secures the blade to the tray & ensures safety during use
• Shaving blade can be field-adjusted while the slitting blade is fixed & factory-set

Groove Sizes:

10.2 mm

12.2 mm

15.8 mm

18.2 mm

Replacement blades for the TurboSlitter™ from Condux, a cordless drill attachment that can easily split HDPE pipe with wall thicknesses ranging from 0.097 to 0.216 inches! The cordless drill attachment quickly adjusts to fit almost any rechargeable drill, 14-volt and larger. Save time and effort on the job with the TurboSlitter from Condux.

Condux TurboSlitter REPLACEMENT BLADES 08010203]

Works with cable from 1/2" to 4". Ratchet design is safer for both user & cable compared to sheath knives...

Works with cable from 1/2" to 4". Ratchet design is safer for both user & cable compared to sheath knives...

Designed to support slit, ring, and spiral cuts on cable diameters from 10 to 60 mm.

• Equipped with safe, recessed blade to prevent potential injury & blade damage
• Compatible with large telecom cables, large fiber optic ducts & various other large diameter power cables
• Easily adjust the blade position to perform ring, spiral & longitudinal cuts
• Quickly adjusts to suit hard & soft insulated cables with 0.39″ to 2.36″ (10 mm – 60 mm) diameters on cable ends & 0.39″ to 1.96″ (10 – 50 mm) on cable mid-spans
• Blade depth knob adjusts up to 0.177″ (4.5 mm) in increments of 0.002″ (0.05 mm) & features a convenient inch or metric scale for guaranteed precision
• Replaceable, machined & ground tool steel blade
• Reinforced diameter adjustment jaw is durable & travels on a threaded rod to provide precise stability between the blade & jacket

The Innerduct Slitter is designed for fast, safe cutting of innerducts from 1" (25 mm) to 2" (51 mm). HDPE Slitter.1.25"-2.0"Range.

TurboSlitter-Cordless Drill Attachment CONDUX 08010220

The TurboSlitter™ from Condux can easily split HDPE pipe with wall thicknesses ranging from 0.097 to 0.216 inches! Available in two styles, pneumatic and cordless drill attachment. The cordless drill attachment quickly adjusts to fit almost any rechargeable drill, 14-volt and larger. Save time and effort on the job with the TurboSlitter from Condux.

Can be used with a standard drill

Lightweight shear head for easy one-hand control

• Includes a free rugged carrying case, the H-20!
• Fixed jaws and ratcheting feature make it easy to grip and slit heavy-duty cable jackets, including jackets made of HDPE (High Density Polyethylene)
• Works on cables or ducts at least 1 1/2" (3.81 cm) in diameter
• Easy adjustable blade depth adjusts from 1/8" - 3/8" (3.18 mm - 9.53 mm) to handle thick-jacketed cables and ducts
• Stainless steel construction with plated steel and aluminum hardware for maximum durability and corrosion resistance
• Perfect for removing thick cable jackets on large submariner power cables, large telecom cables (600 pair+), large fiber optic ducts, or other large power cables