Polywater® FST™-250 Foam Duct Sealant
FST™ closed-cell duct sealant provides superior pressure-blocking power in the toughest environments. It stops methane and other gases to keep electrical systems intact. FST Duct Sealant is stronger, more chemically resistant, and cures 50 times faster than open-cell aerosol foams. The FST seal has excellent adhesion to PVC, rigid steel, EMT, IMC, fiberglass and polyethylene conduits. FST is a proven solution that has been used for years to protect switchgear, panels, riser poles, combiner boxes, meters, and all types of electrical and telecommunication apparatus. It creates a semi-permanent seal and is reenterable.
Includes:
- 1 8.5-oz two-part Foam Sealant caulking tube style (cat# FST-250)
- 1 Mixing nozzles
- 1 Resealing cap
Seal water, dirt, oil, gases, rodents, or other contaminants out of conduit/duct or central office. Protect your investment in cable, electronics, Deter copper cable thieves. Cured foam is strong, resilient and chemically resistant. Provides superior protection in adverse field conditions and where cable movement is present. Can hold 22 feet water-head pressure over an extended period of time. Will tolerate cable movement.
Foam expands and cures quickly even when water is present. Seal ducts quickly and neatly, Two-part foam is mixed in nozzle as it is injected -- no mixing required, Saves time with no measuring, Packages are resealable, no waste, Cured foam is semi-permanent and can be removed, No known effects on common cable and wire jacketing compounds.
SuperSwab® Weld-On IPS 14108
SuperSwab® Weld-On IPS 14108
A sturdy easy-to-grip 4″ swab for pipe diameter from 4″ through 8″. Adjustable length and dual cap design that fits quart and gallon containers. The swab tip is disposable and swab holder is reusable.
SuperSwab® Weld-On IPS 14111
Weld-On IPS-SUPERSWAB 14111
INCLUDES 1 SUPERSWAB AND ONE HANDLE NOT PACKAGED FITS QUART AND GALLON CONTAINERS
A sturdy easy-to-grip 4″ swab for pipe diameter from 4″ through 8″. Adjustable length and dual cap design that fits quart and gallon containers. The swab tip is disposable and swab holder is reusable.
SuperSwab® Well Done Replacement \ SWAB 14112 EA.
PVC CEMENT IPS Replacement SWAB 14112 - 1 REPLACEMENT SWAB
A sturdy easy-to-grip 4″ swab for pipe diameter from 4″ through 8″. Adjustable length and dual cap design that fits quart and gallon containers. The swab tip is disposable and swab holder is reusable.
Weld-On IPS 12121 PB1 PLASTIC BRUSH APPLICATOR
Weld-On Plastic Brush Applicator
Brush Applicator for Pint and Quart Cans of PVC Glue and Primer.
Features:
- Plastic Cap with Handle and Brush Applicator
- For PVC Glue, Primer and Solvents
- Fits Pint and Quart size cans
Weld-On® 10273 PVC Cement 1 Quart GREEN 794™ ABS to PVC
Weld-On® 794™ (ABS-PVC TRANSITION) - MEDIUM BODIED
Medium bodied, fast setting, low VOC transition cement for all classes and schedules with interference fit through 6″ (160 mm) diameter (not for Schedule 80). Specifically designed for use on ABS to PVC transition joints in non-pressure systems. Suitable for sewer, DWV, and conduit.
PRODUCT Weld-On® 794™ ABS–PVC Transition
AVAILABLE COLORS Green
MAX RECOMMENDED PIPE SIZE
(INTERFERENCE FIT)
6″ (160 mm)
Not for Sch. 80
PN 10 or higher
RELATIVE SET TIME Fast
Weld-On® 12084 PVC Cement 1 Gallon DUIT™ 413™ CLEAR
Weld-On® DUIT™ 413™ PVC CEMENT - MEDIUM BODIED
WELD-ON®
DUIT™ 413™ is a clear or gray, low VOC emission, medium bodied, fast setting, very high strength PVC solvent cement
for all PVC electrical duct and conduit with interference fit through 8 inch (200 mm) diameter. Can be used with or without primer.
Check your local code requirements.
APPLICATION:
WELD-ON DUIT 413 is for use on all PVC power and communication duct, conduit and any non-pressure PVC application.
SPECIFICATIONS:
COLOR: Clear or Gray
RESIN: PVC
SPECIFIC GRAIVITY: 0.920 @ 23⁰C (73⁰F)
BROOKFIELD VISCOSITY: Minimum 500 cP @ 73° ± 2°F (23° ± 1°C)
Weld-On® 12085 PVC Cement 1 Quart Clear Duit 413 CLEAR
Weld-On® DUIT™ 413™ CLEAR
Medium bodied, fast setting, low VOC cement for all PVC electrical conduit or any non-pressure PVC application with interference fit through 8″ (200 mm) diameter. Can be used without primer if local codes permit.
Weld-On® 12088 PVC Cement 1 Gallon Gray Duit 413™
Weld-On® DUIT™ 413™ 1 gallon
Medium bodied, fast setting, low VOC cement for all PVC electrical conduit or any non-pressure PVC application with interference fit through 8″ (200 mm) diameter. Can be used without primer if local codes permit.
Weld-On® 12089 PVC Cement 1 Quart Gray Duit 413
Medium bodied, fast setting, low VOC cement for all PVC electrical conduit or any non-pressure PVC application with interference fit through 8″ (200 mm) diameter. Can be used without primer if local codes permit. PVC Cement 1 Quart Gray 12089 Weld-On Duit 413.
Weld-On® 12090 PVC Cement 16oz DUIT™ 413™ Gray
Phyisical/Chimical properties
Appearance Gray Liquid
Viscosity min. 1600 cps @ 73° F ± 2° F
Density 7.86 ± 0.2 lbs/gallon
Lap Shear Strength (minimum per ASTM Standards)
2 hours 250 psi
16 hours 500 psi
72 hours 900 psi
Set Up Time
30° F to 50° F 4 – 5 minutes
50° F to 70° F 2 – 3 minutes
70° F to 90° F 1 – 2 minutes
Shelf Life 3 years from manufacture date
Weld-On® 12091 PVC Cement 1 Gallon Blue DUIT™ 425™
The 12091 Weld-On Duit 425(Blue) is a medium bodied, extremely fast setting, low VOC
cement for all PVC electrical conduit or any non-pressure PVC application with interference
fit through 6″ (160 mm) diameter. Can be used without primer if local codes permit.
Has a three year shelf life.
WELDON DUIT
Weld-On® 12092 PVC Cement 1 Quart Blue DUIT™ 425™
The 12092 Weld-On® DUIT™ 425™ (Blue) is a medium bodied, extremely fast setting, low VOC
cement for all PVC electrical conduit or any non-pressure PVC application with interference
fit through 6″ (160 mm) diameter. Can be used without primer if local codes permit.
Has a three year shelf life.
WELDON
