This block handles any cable or bundles up to 4" for temporarily supporting during stringing operations.

This block is used to support one cable up to 1" (25.40 mm) on new 1/4" (6.35 mm) strand. The high strength aluminum frame has a spring-loaded steel pin that keeps it locked on the strand & the cable on the nylon roller.

This 2-3/4 in. (70 mm) single roller block is designed to support fiber optic, self-support or small copper cables at poles.

This versatile, economical block supports any cable up to 1 1/4 in. (32mm) in diameter including coaxial, up so you can use it in CATV cabling.

This 2-3/4 in. (70 mm) single roller block is designed to support fiber optic, self-support or small copper cables at poles.

This overlash cable block is perfect for temporarily suspending any cable up to 2 3/4 (70 mm) diameter on 1/4 - 3/8in (6-10 mm) diameter.

This Block is normally used for pulling in self support or prelashed cable and is mounted with either a B, C, D, E, or F Cable Block Frame at a pole.

H-Block is used to pull cable towards or away from corner poles or other locations. Accommodates cable from 1-1/2-3" daimeter with a 5,000lb load capacity.

POLE MOUNT BRACKET GMP 70372
Corner Block Roller set up:
*vertical angle adapter 70440
*90 corner block w/ aluminum rollers 70449
*pole mount bracket 70372

GMP 70011 C2 Lasher Guards or halos keep the C2 Lasher free of tree limbs, drop wires, and/or any other obstructions that could otherwise jeopardize your work space.

This block is functionally similar to the D cable block. This larger tool can be used with G cable lasher to handle cable up to 5". Vertical side rollers minimize cable friction during pull-in.

These rugged and lightweight corner blocks are used to guide cable and evenly distribute the load on the cable when pulling around corners.

These rugged and lightweight corner blocks are used to guide cable and evenly distribute the load on the cable when pulling around corners.