Compact, lightweight wire-stripping and cutting tool. Narrow nose fits into tight places. Hardened steel with...

Klein wire stripper6-12 AWG, Precision shear-type blades for clean cuts on stranded copper wire....

.

.

Leather construction. Long-nose pliers may protrude through opening at bottom. Holds 8'' (203 mm) or 9'' (229 mm) long-nose or diagonal-cutting pliers.

Pliers, Rule and Screwdriver Holder. Pockets for 7", 8" and 9" side-cutting pliers, most....

Includes: Heavy Duty Side Cutting Pliers (Cat. No. D2000-9NE). Klein-Kurve® Wire Stripper...

• Plastic replacement handles for slip-resistant grip and comfort
• Fit these to an existing pair of 8-Inch (203 mm) to 9-Inch (229 mm) pliers
• To install, place open end of grip in hot tap water to within one inch of plugged end for approximately one minute, drive grip onto pliers handle.
• Made in USA

These Lineman's Side-Cutting pliers feature induction hardened cutting knives for long life. The 2000 series blades are designed for heavy-duty cutting of ACSR, screws, nails, and most hardened wire. The high-leverage design provides 46% greater cutting power than other plier designs. Exclusive handle tempering absorbs the ''snap'' when cutting wire. Pick up these Klein's and feel the difference.

The 6-in. Long-Nose, Side-Cutting Pliers are made of the finest U.S. steel alloy. They are forged, precision machined, hardened and carefully tempered for maximum strength and faultless performance. The long nose pliers with side cutters have knives that meet at the hinge first and then meet at least one-half of the knife length. This precise knife-closing design increases knife life and facilitates resharpening. Pliers are individually adjusted to meet performance standards far exceeding application requirements.

These Long-Nose Side-Cutting Pliers are made of custom, US-made
tool steel that features induction hardened, long-lasting cutting
knives. The knurled jaws provide sure wrapping and looping.

Cleanly strips 12 AWG solid wire. Heavier design for greater cutting power. Extended handles provide added reach and leverage. Slim head design for working in confined areas. Induction hardened cutting knives for long life.

9" High-Leverage Lineman's Bolt-Threading
Holding Hinge opening holds and cleans 5/8" pole line and hardware and bolts or threaded rods

Crimps and seats Scotchlok UG, UR, and UY connectors. Hot-riveted joint for smooth action and no handle wobble. Curved handles for greater control. Induction hardened side-cutting knives for long life. Spring-loaded action for self-opening.

Klein's precision flush cutter shears soft wire up to 18 AWG producing a flat, straight cut. The ultra slim profile makes it easier to get into tight spaces. Cushioned grips and steel spring return help reduce fatigue when making repetitive cuts. The blades are heat treated for long life. This is your go-to tool when you want precision and control when cutting soft wire.

Tightens 1/2'' and 3/4'' EMT or 1/2'' rigid locknuts. Fits liquid tight fittings and caps. Reams and smoothes both inside and outside of conduit. Knurled jaws at nose tip pull wire or fish tape. Machined nose fits snugly into locknut wings.

Klein Tools 10 inch (254 mm) Pump Pliers feature a secure tongue and groove design for a non-slip grip even when heavy pressure is applied. It has a tension-loaded joint to reduce handle wobble for sure gripping. Plastic-dipped handles provided added comfort and ease of identification.

Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol. Two layers of insulation provide protection against electric shock. Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool. Wide range of versatile jaw positions. Secure tongue and groove design for non-slip grip - even with heavy pressure.

Shear-type cutter for precision wire cutting. Two versatile jaw positions. Serrated jaws provide sure-gripping power. Nickel-chrome plated for long life.

Quickly installs and removes spring-tension hose clamps. Grips with either end or side of jaws for work in confined areas. Nickel-chrome plated for long life.

• Pliers hinge opening holds and cleans 5/8-Inch (1.6 cm) pole line and hardware bolts or threaded rods
• High-leverage design. Rivet is closer to the cutting edge for 46-percent greater cutting and gripping power than other plier designs
• Induction hardened cutting knives for long life
• Hot-riveted joint ensures smooth action and no handle wobble
• Made in USA with Custom, US-made tool steel
• Streamlined design with rounded nose and sure-gripping, cross-hatched knurled jaw
• Unique handle tempering helps absorb the ''snap'' when cutting wire
• Precision-hardened plier head for on-the-job toughness
• Heavy-duty, oversized plastic-dipped handles for comfort and ease of identification
• ''Handform'' handles for full gripping and cutting power

• Diagonal Cutters with angled head design for easy work in confined spaces
• Pliers cut ACSR, screws, nails, and most hardened wire
• High-leverage design. Rivet is closer to the cutting edge for 36-percent greater cutting power than other plier designs
• Short jaws and beveled cutting edges permit close cutting of wire
• Made in USA with Custom, US-made tool steel
• Induction-hardened cutting knives for long life
• Hot-riveted joint ensures smooth action and no handle wobble
• Dual-material Journeyman™ handles provide a better grip without sacrificing tool strength and durability
• Professional-grade materials for toughness and durability
• Exclusive handle tempering absorbs the ''snap'' when cutting wire

Quickly and easily pulls 1/8'' (3 mm) or 1/4'' (6 mm) flat steel fish tape without damaging the tape. High-leverage design. Rivet is closer to the cutting edge for 46% greater cutting and gripping power than other plier designs. Induction hardened cutting knives for long life. Hot-riveted joint ensures smooth action and no handle wobble. Streamlined design with sure-gripping, cross-hatched knurled jaws.

The Klein 228-8 Diagonal-Cutters have a high-leverage design for 36% more cutting power than other pliers. Jaw Capacity: 1" (2.5 cm)

The Klein 248-08 Diagonal-Cutters have a high-leverage design for 36% more cutting power than other pliers. Jaw Capacity: 0.75'' (1.9 cm)

Klein Tools 10 inch (254 mm) Pump Pliers feature a secure tongue and groove design for a non-slip grip even when heavy pressure is applied. It has a tension-loaded joint to reduce handle wobble for sure gripping. Plastic-dipped handles provided added comfort and ease of identification.

• Pliers with split ring for tethering for fall protection while working at height
• High-leverage design has 46-percent more cutting power
• Hot riveted joint ensures smooth action and no handle wobble
• Induction hardened cutting knives for long life
• Made in USA with Custom, US-made tool steel
• ''Handform'' handles for full gripping and cutting power
• Tether not included

• Diagonal Cutters include split ring for tethering plier while working at height
• Pliers have high-leverage design for greater cutting and gripping power
• Short jaws and beveled cutting edges permit close cutting of wire
• Induction hardened cutting knives for long life
• Made in USA with Custom, US-made tool steel
• Hot riveted joint ensures smooth action and no handle wobble
• Plastic dipped handles for comfort and ease of identification
• Tether not included