Pole gains enhance the stability of the crossarm and pole interface.
They are used where it is not possible or desirable to cut a gain in the pole.
5 1/4" x 4"
Hot Dip Galvanized

Braceless crossarm gains improve the stability of the crossarm and eliminate the need for crossarm braces and pole gaining.The design improves the structure appearance and permits the use of fiberglass, wood, steel channel or steel tubular arms. Pole Mounting Slots 13/16 wide on top & 11/16 wide on Bottom Accommodates pole diameters from 6" - 12". Arm mounting slots are 9/16 inch wide by1-1/2 inch . Crossarm range: 4-1/2" - 6"

Braceless crossarm gains improve the stability of the crossarm and eliminate the need for crossarm braces and pole gaining.The design improves the structure appearance and permits the use of fiberglass, wood, steel channel or steel tubular arms. Accommodates pole diameters from 6 inches to 12 inches. Pole mounting slots are 13/16 inch wide on the top slot and 11/16 inch on bottom slot. Crossarm range: 4-1/4" - 6"

Mounting bracket 14" X 5" with two 5/8" carriage bolts and nuts.
Two buckles required for all band brackets and attachments.

Crossarm Range: 3-1/2 - 8

Braceless crossarm gains improve the stability of the crossarm and eliminate the need for crossarm braces and pole gaining. The design improves the structure appearance and permits the use of fiberglass, wood, steel channel or steel tubular arms. Accommodates pole diameters from 6 inches to 12 inches. Pole mounting slots are 13/16 inch wide on the top slot and 11/16 inch on bottom slot. Arm mounting slots are 9/16 inch wide by1-1/2 inch .

Mounting bracket of 3/4” Galvanized
Steel, 10” x 5” formed channel with
21/2” legs. 13/16” mounting hole.

General purpose mount D-4080-BS1, 10"X5" with 5/8 carriage bolt and nut. Two buckles required for all banded brackets and attachments.