Condux 08761842 Fixed Head Innerduct Pulling Eye 1"-1.25, 1.06"-1.43"

Condux 08761842 Fixed Head Innerduct Pulling Eye 1"-1 1/4", 1.06-143"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.

6-1/2" Wedge Clamp Conductor .250"-.414" MSI 7187

MSI H-7187, 6-1/2" Wedge Clamp, is mechanical holding device used for strain relief in service applications. It has solid stainless bails that are used on eye hooks and insulators with a diameter larger than 1.5". This clamp is designed for low tension applications only, and also has a mechanical working load of 1,200 lbs.
Specifications/Applications:

• Bail Size: 6-1/2"
• Material: Solid Stainless Steel
• Conductor Diameter Range: 0.250" - 0.414"
• ACSR ASTM-B232: 1/0 - #4
• AAAC ASTM-B399: 1/0 - #4
• AAC ASTM-B231: 2/0 - #2

Condux 08017200 Breakaway Swivel 5/8" 600 lbs.

Condux 08017200 Breakaway Swivel 5/8" 600 lbs.

Essential for fiber optic and coaxial cable pulling, these swivels have a break load ranging from 150–1,800 pounds (667–8,006 N) and are designed to separate at ±10% of their rated break load. If the load rating is exceeded, the interior break pin fractures, the swivel separates, and the cable remains undamaged.

*Replacement Pin Not Included*
Condux 08017205 Replacement Breakaway Pin for 5/8" Swivel 600 lbs.

SUB - GMP71408

Condux 08761844 Fixed Head Innerduct Pulling Eye 1 .5", 1.37"-1.68"

Condux 08761844 Fixed Head Innerduct Pulling Eye 1.5", 1.37-1.68"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.

Condux 08761846 Fixed Head Innerduct Pulling Eye 2", 1.80"-2.19"

Condux 08761846 Fixed Head Innerduct Pulling Eye 2", 1.80-2.19"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.

Condux 08914130 Fixed Head Innerduct Pulling Eye 1-1/4", 1.06"-1.43"

Condux 08914130 Fixed Head Innerduct Pulling Eye 1-1/4", 1.16" -1.43"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.
SUB - GMP60512

Condux 08914150 Fixed Head Innerduct Pulling Eye 1-3/4", 1.68"-1.81"

Condux 08914150 Fixed Head Innerduct Pulling Eye 1-3/4", 1.68"-1.81"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.

Condux 08960712 Pulling Eye, Inner-Duct 1-1/4" Swivel Head

Condux 08960712 Pulling Eye, Inner-Duct 1-1/4" Swivel Head

Condux 08960715 Pulling Eye, Inner-Duct 1-1/2" 1.37" - 1.5" Swivel Head

Condux 08960715 Pulling Eye, Inner-Duct 1.37" - 1.50" Swivel Head
The Inner-duct Pulling Eye is a hybrid tool that combines features from standard inner-duct pulling eyes and Condux swivels. A swivel head prevents twisting and binding of the inner-duct as it is installed.
Specification:
ID Range: 1.37" - 1.50"
Max OD: 1.50"

Condux 08960720 Pulling Eye, Inner-Duct 2" Swivel Head

Condux 08960720 Pulling Eye, Inner-Duct 2" Swivel Head
The Inner-duct Pulling Eye is a hybrid tool that combines features from standard inner-duct pulling eyes and Condux swivels. A swivel head prevents twisting and binding of the inner-duct as it is installed. It eliminates the need for a separate swivel on each pulling eye when installing single innerducts into individual conduits or multiple inner-ducts into a single conduit. Its short length is an advantage on tight bends compared to using a separate swivel and pulling eye. Easily installed using a 1-3⁄8" deep socket or adjustable wrench.
SUB - GMP61520

Specification:
ID Range: 2"

Condux 08643524 Fiber Optic Pulling Grip Flexible Eye 0.53-0.74"

Double/Single weave mesh, galvanized steel for outside plant cable. Used for installation of fiber optic communication lines either underground, overhead, through conduit or through enclosures. They will fit single cables or cable bundles, are easily installed on the cable and are reusable.
Fiber Optic - Flexible Eye, Double/Single Weave, Low Profile Grip

• Cable Diameter Range: 0.53-0.74"
• Approx. Breaking Strength: 3300 lbs.
• Eye Length: 6-1/2"
• Mesh Length: 24"

Condux 08642155 Fiber Optic Pulling Grip Swivel Eye 2.00-2.49"

• Cable Diameter Range: 2.00-2.49"
• Approx. Breaking Point: 27,200 lbs.
• Eye Length: 9"
• Mesh Length: 36"

Condux 08641813 Fiber Optic Pulling Grip Swivel Eye .25-.49"

• Cable Diameter Range: .25-.49"
• Approx. Breaking Point: 6,800 lbs.
• Eye Length: 5"
• Mesh Length: 26"

Condux 08914142 Fixed Head Innerduct Pulling Eye 1-1/2", 1.5"-1.68"

Condux 08914142 Fixed Head Innerduct Pulling Eye 1-1/2", 1.5"-1.68"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.
SUB - GMP60515

Condux 08914162 Fixed Head Innerduct Pulling Eye 2", 1.88"-2.07"

Condux 08914162 Fixed Head Innerduct Pulling Eye 2", 1.88"-2.07"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.
SUB - GMP60520

Condux 08914122 Fixed Head Innerduct Pulling Eye 1", 0.97"-1.14"

Condux 08914122 Fixed Head Innerduct Pulling Eye 1", 0.97"-1.14"
Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux Swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.
SUB - GMP60510

Condux 08581231 Threaded Chain Connector 5/16" 1430 Lbs

Offers a quick and easy way to connect pulling eyes or swivels to winch lines, harnesses or rope. To close, simply screw the nut onto the threaded end. Connectors are reusable.

Note: To be used for cable stringing or pulling only. 5/16" 1430 Lbs

Condux 08581237 Threaded Chain Connector 3/8" 1,760 Lbs

Offers a quick and easy way to connect pulling eyes or swivels to winch lines, harnesses or rope. To close, simply screw the nut onto the threaded end. Connectors are reusable.

Note: To be used for cable stringing or pulling only. 3/8" 1,760 Lbs

Condux 08581250 Threaded Chain Connector 1/2" 2,755 Lbs

Offers a quick and easy way to connect pulling eyes or swivels to winch lines, harnesses or rope. To close, simply screw the nut onto the threaded end. Connectors are reusable.

Note: To be used for cable stringing or pulling only. 1/2" 2,755 Lbs

Condux 08581256 Threaded Chain Connector 9/16" 4410 Lbs

Offers a quick and easy way to connect pulling eyes or swivels to winch lines, harnesses or rope. To close, simply screw the nut onto the threaded end. Connectors are reusable.

Note: To be used for cable stringing or pulling only. 4410 Lbs 14.3mm

Condux 08581262 Threaded Chain Connector 5/8" 5510 Lbs

Offers a quick and easy way to connect pulling eyes or swivels to winch lines, harnesses or rope. To close, simply screw the nut onto the threaded end. Connectors are reusable.

Note: To be used for cable stringing or pulling only. 5/8" 5510 Lbs

Condux 08580837 Figure 8 Swing Link 3/8" 900lbs

Condux 08580850 Figure 8 Swing Link 1/2" 1,620lbs

Condux 08580875 Figure 8 Swing Link 3/4" 3600lbs

Condux 08580899 Figure 8 Swing Link 1" 8100lbs

CONDUX 08581225 Threaded Chain Connector 1/4" 770 Lbs

Offers a quick and easy way to connect pulling eyes or swivels to winch lines, harnesses or rope. To close, simply screw the nut onto the threaded end. Connectors are reusable.

Note: To be used for cable stringing or pulling only. 1/4" 770 Lbs 6.4mm

Condux 08643755 Fiber Optic Pulling Grip 0.32-0.48"

Double/Single weave mesh, galvanized steel for outside plant cable. Used for the installation of fiber optic communication lines either underground, overhead, through conduit or through enclosures. They will fit single cables or cable bundles, are easily installed on the cable and are reusable.
Fiber Optic - Flexible Eye, Double/Single Weave, Low Profile Grip

• Cable Diameter Range: 0.32-0.48"
• Approx. Breaking Strength: 2,000 lbs.
• Eye Length: 8-1/2"
• Mesh Length: 19"

Condux 08643754 Fiber Optic Pulling Grip 0.21-0.35"

• Cable Diameter Range: 0.21-0.35"
• Approx. Breaking Point: 1,400 lbs.
• Eye Length: 7-1/2"
• Mesh Length: 14"

Condux 08643753 Fiber Optic Pulling Grip 0.10-0.22"

Double/Single weave mesh, galvanized steel for outside plant cable. Used for the installation of fiber optic communication lines either underground, overhead, through conduit or through enclosures. They will fit single cables or cable bundles, are easily installed on the cable and are reusable.
Fiber Optic - Flexible Eye, Double/Single Weave, Low Profile Grip

• Cable Diameter Range: 0.10-0.22"
• Approx. Breaking Strength: 900 lbs.
• Eye Length: 7-1/2"
• Mesh length: 10"

Condux 08643716 Fiber Optic Pulling Grip 0.38-0.49"

Fiber Optic Slack Grip - Split Mesh, Rod Closing, Single Weave steel for outside plant cable. Used for the installation of fiber optic communication lines either underground, overhead, through conduit or through enclosures. They will fit single cables or cable bundles, are easily installed on the cable and are reusable.

Condux 08017000 - 808 Champion Swivel 5/8" 600 lbs.

Condux 08017000 - 808 Champion Swivel 5/8" 600 lbs.(Not a Breakaway swivel)
Condux Ball Bearing Swivels are designed to the highest specifications for underground and overhead pulling applications. All swivels are tested and inspected to ISO 9001:2000 quality standards. This ensures the customer is getting the most reliable and safest swivel on the market. All swivels are precision machined from high grade stainless steel. Clevis pins are heat treated to prevent pin damage when using steel shackles. Each swivel is manufactured with three angular contact or deep groove ball bearings, which allow the swivel to rotate beyond its rated load. Most manufacturers use only one bearing to handle the load, causing the swivels to stop rotating before it reaches the recommended workload.

Condux 08643757 Fiber Optic Pulling Grip 0.53-0.74"

Double/Single weave mesh, galvanized steel for outside plant cable. Used for the installation of fiber optic communication lines either underground, overhead, through conduit or through enclosures. They will fit single cables or cable bundles, are easily installed on the cable and are reusable.
Fiber Optic - Flexible Eye, Double/Single Weave, Low Profile Grip

• Cable Diameter Range: 0.53-0.74"
• Approx. Breaking Strength: 3,000 lbs.
• Eye Length: 8-1/2"
• Mesh Length: 23"

Condux 08643756 Fiber Optic Pulling Grip 0.42-0.61"

Double/Single weave mesh, galvanized steel for outside plant cable. Used for installation of fiber optic communication lines either underground, overhead, through enclosures. They will fit single cables or cables bundles, are easily installed on the cable and are reusable.
Fiber Optic - Low Profile, Double/Single Weave, Low Profile Grip

• Cable Diameter Range: 0.42-0.61"
• Approx. Breaking Strength: 2,500 lbs.
• Eye Length: 8-1/2"
• Mesh Length: 21"

Condux 08643759 Fiber Optic Pulling Grip 0.75-1.00"

Double/Single weave mesh, galvanized steel for outside plant cable. Used for installation of fiber optic communication lines either underground, overhead, through conduit or through enclosures. They will fit single cables or cable bundles, are easily installed on the cable and are reusable.
Fiber Optic - Flexible Eye, Double/Single Weave, Low Profile Grip

• Cable Diameter Range: 0.75-1.00"
• Approx. Breaking Strength: 4,200 lbs.
• Eye Length: 8-1/2"
• Mesh Length: 28"

Condux 08017205 Break-Away Swivels Replacement Pins for 5/8" Swivel 600 lbs.

Condux 08017205 Replacement Breakaway Pin for Condux 08017000 Breakaway Swivel 5/8" 600 lbs

Condux Breakaway Swivel are essential for fiber optic and coaxial cable pulling, these swivels have a break load ranging from 150-1,800 lbs. (667-8,006 N) and are designed to separate at 5 percent of their rated break load. If the load rating is exceeded, the interior break pin fractures, the swivel separates, and the cable remains undamaged.
Replacement Breakaway Pin for 5/8" Swivel 600lbs.
Condux 08017200 Breakaway Swivel 5/8" 600 lbs.
GMP 71408 Breakaway Swivel 5/8" 600lbs.

Condux 08017700 Breakaway Swivel 7/8" 1700 lbs.

Condux 08017700 Breakaway Swivel 7/8" 1700 lbs

Essential for fiber optic and coaxial cable pulling, there swivels have a break load ranging from 150-1,800 pounds (667-8,006 N) and are designed to separate at ±10% of their rated break load. If the load rating exceeded, the interior break pin fractures, the swivel separates and the cable undamaged.

Condux 08643128 Fiber Optic Pulling Grip Light Duty - Standard 062.-0.74"

Fiber Optic Slack Grip - Split Mesh, Rod Closing, Single Weave steel for outside plant cable. Used for the installation of fiber optic communication lines either underground, overhead, through conduit or through enclosures. They will fit single cables or cable bundles, are easily installed on the cable and are reusable.

Condux 08016000H - 808 Champion Swivel 7/8" 2500 lbs.

Condux 08016000H - 808 Champion Swivel 7/8" 2500 lbs.(Not a Breakaway swivel)
Condux Ball Bearing Swivels are designed to the highest specifications for underground and overhead pulling applications. All swivels are tested and inspected to ISO 9001:2000 quality standards. This ensures the customer is getting the most reliable and safest swivel on the market. All swivels are precision machined from high grade stainless steel. Clevis pins are heat treated to prevent pin damage when using steel shackles. Each swivel is manufactured with three angular contact or deep groove ball bearings, which allow the swivel to rotate beyond its rated load. Most manufacturers use only one bearing to handle the load, causing the swivels to stop rotating before it reaches the recommended workload.

Condux 08019305 Break-Away Swivels Replacement Pins for 7/8" Swivel 1700lbs.

Condux 08019305 Replacement Breakaway Pin for Condux 08017700 Breakaway Swivel 7/8" 1700lbs

Condux Breakaway Swivel are essential for fiber optic and coaxial cable pulling, these swivels have a break load ranging from 150-1,800 lbs. (667-8,006 N) and are designed to separate at 5 percent of their rated break load. If the load rating is exceeded, the interior break pin fractures, the swivel separates, and the cable remains undamaged.
Replacement Breakaway Pin for 7/8" Swivel 1700lbs.


Condux 08017700 Breakaway Swivel 7/8" 1700 lbs.

Condux 08016905 Break-Away Swivels Replacement Pins for 5/8" Swivel 450lbs.

Condux 08016905 Break-Away Swivels Replacement Pins

Condux Breakaway Swivel are essential for fiber optic and coaxial cable pulling, these swivels have a break load ranging from 150-1,800 lbs. (667-8,006 N) and are designed to separate at 5 percent of their rated break load. If the load rating is exceeded, the interior break pin fractures, the swivel separates, and the cable remains undamaged.

Condux 08643758 Fiber Optic Pulling Grip 0.64-0.87"

Double/Single weave mesh, galvanized steel for outside plant cable. Used for installation of fiber optic communication lines either underground, overhead, through conduit or through enclosures. They will fit single cables or cable bundles, are easily installed on the cable and are reusable.
Fiber Optic - Flexible Eye, Double/Single Weave, Low Profile Grip

• Cable Diameter Range: 0.64-0.87"
• Approx. Breaking Strength: 4,200 lbs.
• Eye Length: 8-1/2"
• Mesh Length: 25"

Condux 08016900 Break-Away Swivel - 5/8" 450LB Break Load

Condux 08016900 Break-Away Swivel - 5/8" 450LB
Essential for fiber optic and coaxial cable pulling, these swivels have a break load ranging from 150–1,800 pounds (667–8,006 N) and are designed to separate at ±10% of their rated break load. If the load rating is exceeded, the interior break pin fractures, the swivel separates, and the cable remains undamaged

GMP 71408 Breakaway Swivel 5/8" 600LB

GMP 71408 Breakaway Swivel 5/8"600LB
Breakaway Swivel 5/8" 600LB GMP 71408. 5/8 in. (15.88 mm) made from Steel. Our Break-away Swivels give you invaluable protection when pulling either fiber optic or coaxial cable.These simple tools provide an inexpensive fracture point between the pulling line and cable avoiding costly cable damage if the cable's rated pulling capacity is exceeded. The 5/8 in. size is extremely convenient when working with innerduct sizes below 1-5/8 in. in diameter. The design of the swivels incorporates a replaceable tension bolt that joins the barrel eye and swivel body. The bolt separates when pulling loads on the cable reach +/-5%. The damaged bolt can then be replaced in seconds using an Allen Breakaway BoltWrench (included) and screwdriver.

P/N Replacement Bolt5/8" 600 LB Breakaway Swivel GMP 25493

SUB - CON 08017200

GMP 53703 Breakaway Swivel 7/8" 800LB

GMP 53703 Breakaway Swivel 800LB 7/8"
Breakaway Swivel 7/8" 800LB GMP 53703. 7/8 in. (22.23 mm) made from high quality aluminum. Break-Away Swivels provide an inexpensive fracture point between a pulling line & fiber optic cable to protect against costly cable damage if the cable's rated pulling capacity is exceeded. The 7/8" x 4 5/8" body is made of high quality aluminum alloy with a black anodized finish for wear resistance. Steel thrust washers and bushings insure smooth rotation under load and help to keep twisting forces from reaching the cable. Each unit comes with a replaceable color-coded tension bolt. The swivel & bolt are color-coded for identification. The bolt will separate when the pulling load reaches +/-5% of the bolt rating. It can then be replaced using an Allen Wrench (included) & screwdriver.

P/N Replacement Bolt7/8" 800LB Breakaway Swivel GMP 34342

SUB - CON 08018700

GMP 70137 Heavy Duty Ball Bearing Swivel 5000lb

GMP70137 SWIVEL 5000 LBS
4-5/32 LENGTH, SLOT PIN
SWIVEL HEAVY DUTY 17/32
EYE WIDTH, 1-1/4 DIAMETER,

These tough swivels are designed to handle higher thrust loads for extra cable safety and faster straight pulls. These heavy-duty swivels are built with a thrust bearing for tensile load and a radial bearing for bending load.
SUB - CON08080912

GMP 71406 Breakaway Swivel 5/8" 450 LB

Breakaway Swivel 5/8" 450LB GMP 71406. 5/8 in. (15.88 mm) made from Steel. Our Break-away Swivels give you invaluable protection when pulling either fiber optic or coaxial cable.These simple tools provide an inexpensive fracture point between the pulling line and cable avoiding costly cable damage if the cable's rated pulling capacity is exceeded. The 5/8 in. size is extremely convenient when working with innerduct sizes below 1-5/8 in. in diameter. The design of the swivels incorporates a replaceable tension bolt that joins the barrel eye and swivel body. The bolt separates when pulling loads on the cable reach +/-5%. The damaged bolt can then be replaced in seconds using an Allen Breakaway BoltWrench (included) and screwdriver.

P/N Replacement Bolt5/8" 450 LB Breakaway Swivel GMP 25494

SUB - CON 08016900

Double Weave-Single Flexible Pulling Grip 0.33-0.78" GMP 70670

The GMP Double Weave Pulling Grip is manufactured for high-tensile, galvanized steel wire that is evenly hand woven in a single, double or triple wire weave according to pulling tension requirements. GMP reverse weave our grips which create a loop at the end of the grip instead of being crimped or soldered together. the wire is then joined under the crimped head. This creates a higher quality product that outlasts competition.
Double Weave Single Flexible Eye
Cable Diameter: 0.33-0.78" (10-20mm)
Grip Length: 23.62" (600mm)
Min. Breaking Strength: 4101 lbs.

GMP 53701 Breakaway Swivel 7/8" 450LB

GMP 53701 Breakaway Swivel 7/8" 450 LB

Breakaway Swivel 7/8" 450LB GMP 53701. 7/8 in. (22.23 mm) made from high quality aluminum. Break-away Swivels give you invaluable protection when pulling either fiber optic or coaxial cable. These simple tools provide an inexpensive fracture point between the pulling line and cable avoiding costly cable damage if the cable's rated pulling capacity is exceeded. The design of the swivels incorporates a replaceable tension bolt that joins the barrel eye and swivel body. The bolt separates when pulling loads on the cable reach +/-5%. The damaged bolt can then be replaced in seconds using an Allen Breakaway BoltWrench (included) and screwdriver.

P/N Replacement Bolt7/8" 450 LB Breakaway Swivel GMP 34786

SUB - CON 08015800

Klein KPS100-2 Double Weave, Rotating-Eye Pulling Grip 1.00-1.24"

These medium duty, long length closed-mesh wire pulling grips from Klein combine strength and durability to help linemen get the job done. Manufactured, inspected and tested in the USA, these grips are made of drop forged quality US steel. Grips ate rigorously tested using the Magnuflux method and pulled to rated load to ensure the highest quality and reliability.
Double Weave, Rotating-Eye Pulling Grip

• KPS Heavy Duty-Medium Length
• Cable Diameter Range: 1.00-1.24"
• Approx. Breaking Strength: 2,560 lbs.
• Mesh Length: 20"

Klein KPS050-2 Double Weave, Rotating-Eye Pulling Grip 0.50-0.61"

These medium duty, long length closed-mesh wire pulling grips from Klein combine strength and durability to help linemen get the job done. Manufactured, inspected and tested in the USA, these grips are made of drop forged quality US steel. Grips are rigorously tested using the Magnuflux method and pulled to rated load to ensure the highest quality and reliability.
Double Weave, Rotating-Eye Pulling Grip

• KPS Heavy Duty-Medium Length
• Cable Diameter Range: 0.50-0.61"
• Approx. Breaking Strength: 1,120 lbs.
• Mesh Length: 16"

Klein KPS100-3 Double Weave, Rotating-Eye Pulling Grip 1.00-1.49"

These medium duty, long length closed-mesh wire pulling grips from Klein combine strength and durability to help linemen get the job done. Manufactured, inspected and tested in the USA, these grips are made of drop forged quality US steel. Grips are rigorously tested using the Magnuflux method and pulled to rated load to ensure the highest quality and reliability.
Double Weave, Rotating-Eye Pulling Grip

• KPS Heavy Duty-Medium Length
• Cable Diameter Range: 1.00-1.49"
• Approx. Breaking Strength: 3,280 lbs.
• Mesh Length: 33"

Klein KPJ100 Junior-Duty Single Weave, Flexible-Eye Pulling Grip 1.00-1.24"

These junior duty, closed-mesh wire pulling grips from Klein combine strength and durability to help linemen get the job done. Manufactured, inspected and tested in the USA, these grips are made of drop forged quality US steel. Grips are rigorously tested using the Magnuflux method and pulled to rated load to ensure the highest quality and reliability.
Single Weave, Flexible-Eye Pulling Grip

• Cable Diameter Range: 1.00-1.24"
• Approx. Breaking Strength: 780 lbs.
• Mesh Length: 11.5"

Klein KPJ75 Junior Duty Single Weave, Flexible-Eye Pulling Grip 0.75-0.99"

These junior duty, closed-mesh wire pulling grips from Klein combine strength and durability to help linemen get the job done. Manufactured, inspected and tested in the USA, these grips are made of drop forged quality US steel. Grips are rigorously tested using the Magnuflux method and pulled to rated load to ensure the highest quality and reliability.
Junior Duty Single Weave, Flexible-Eye Pulling Grip

• Cable Diameter Range: 0.75"-0.99"
• Approx. Breaking Strength: 560 lbs.
• Mesh Length: 10"

Klein KPS250-2 Double Weave, Rotating-Eye Pulling Grip 2.50-2.99"

These medium duty, long length closed-mesh wire pulling grips from Klein combine strength and durability to help linemen get the job done. Manufactured, inspected and tested in the USA, these grips are made of drop forged quality US steel. Grips are rigorously tested using the Magnuflux method and pulled to rated load to ensure the highest quality and reliability.
Double Weave, Rotating-Eye Pulling Grip

• KPS Heavy Duty-Medium Length
• Cable Diameter Range: 2.50-2.99"
• Approx. Breaking Strength: 6,600 lbs.
• Mesh Length: 28"

Klein KPS150-2 Double Weave, Rotating-Eye Pulling Grip 1.50-1.99"

These medium duty, long length closed-mesh wire pulling grips from Klein combine strength and durability to help linemen get the job done. Manufactured, inspected and tested in the USA, these grips are made of drop forged quality US steel. Grips ate rigorously tested using the Magnuflux method and pulled to rated load to ensure the highest quality and reliability.
Double Weave, Rotating-Eye Pulling Grip

• KPS Heavy Duty-Medium Length
• Cable Diameter Range: 1.50-1.99"
• Approx. Breaking Strength: 3,280 lbs.
• Mesh Length: 25"

Klein KT4800 Parallel Jaw Grip 4800 Series 0.70-1.25"

• Round jaw shape provides maximum contact with cable, helping to eliminate conductor damage
• Large eyelet opening in the handle to accommodate a wide variety of hooks on hoists, winches and tackle blocks
• Lightweight, compact design perfect for pulling a wide range of cable types and sizes
• Manufactured from drop-forged, heat-treated steel for excellent durability
• Made in USA
• Klein offers a lifetime warranty on material defects and workmanship for the normal life of the product
• Maximum Safe Load: 12,000 lb (5443 kg)
• Cable Diameter: 0.7'' to 1.25'' (17.78 to 31.75 mm)

Klein KPM050 Double Weave, Flexible-Eye Pulling Grip 0.50-0.61"

These medium duty, long length closed-mesh wire pulling grips from Klein combine strength and durability to help linemen get the job done. Manufactured, inspected and tested in the USA, these grips are made of drop forged quality US steel. Grips ate rigorously tested using the Magnuflux method and pulled to rated load to ensure the highest quality and reliability.
Double Weave, Flexible-Eye Pulling Grip

• Cable Diameter Range: 0.50-0.61"
• Approx. Breaking strength: 480 lbs.
• Mesh Length: 13"

Klein KT4501 Parallel Jaw Grip 4501 Series with Hot Latch 0.18" - 0.60"

• Versatile grip hold a wider range of ACSR cable sizes reducing the number of grips needed
• Round jaw holds 0.18 to 0.60-Inch (4.57 to 15.20 mm) diameter cable range
• Large opening in the handle accommodate a wide variety of hooks on hoists, winches and tackle blocks
• Hot latch closes automatically to guard against grip accidentally disengaging from wire
• Made in USA
• Locking handle keeps jaw open while grip is placed on cable with a hot stick
• Max Safe Load of 5000-Pound (2268 kg)

Klein KPS062-2 Double Weave, Rotating-Eye Pulling Grip 0.62-0.74"

These medium duty, long length closed-mesh wire pulling grips from Klein combine strength and durability to help linemen get the job done. Manufactured, inspected and tested in the USA, these grips are made of drop forged quality US steel. Grips are rigorously tested using the Magnuflux method and pulled to rated load to ensure the highest quality and reliability.
Double Weave, Rotating Eye Pulling Grip

• KPS Heavy Duty Medium Length
• Cable Diameter Range: 0.62-0.74"
• Approx. Breaking Length: 1,360 lbs.
• Mesh Length: 16"

Klein KPS200-2 Double Weave, Rotating-Eye Pulling Grip 2.00-2.49"

These medium duty, long length closed-mesh wire pulling grips from Klein combine strength and durability to help linemen get the job done. Manufactured, inspected and tested in the USA, these grips are made of drop forged quality US steel. Grips ate rigorously tested using the Magnuflux method and pulled to rated load to ensure the highest quality and reliability.
Double Weave, Rotating-Eye Pulling Grip

• KPS Heavy Duty Medium Length
• Cable Diameter Range: 2.00-2.49"
• Approx. Breaking Strength: 5,440 lbs.
• Mesh Length: 26"