Jonard’s slip joint pliers are made of carbon steel with a black phosphate finish and are heat treated for maximum strength and durability.
These slip joint pliers feature the following:

• Machined gripping teeth on jaws to provide non-slip grip
• Two jaw positions with smooth, positive interlock between halves for comfort and versatility
• Ergonomically designed handle with dipped plastic grip for greater comfort and torque
• This product is not for use on ACSR or other steel cables
• Side-cutting blades on jaws cut wire with ease

Jonard’s diagonal cutting pliers are made of polished chrome vanadium steel and are heat-treated for maximum strength and durability.
These diagonal cutting pliers feature the following:

• Induction-hardened cutting edge to provide a clean cut every time
• Ergonomically designed handle with dipped plastic grip for greater comfort and torque
• This product complies with ASME B107.11 and ISO 5749 standards

Jonard’s diagonal cutting pliers are made of polished chrome vanadium steel and are heat-treated for maximum strength and durability.
These diagonal cutting pliers feature the following:

• Induction-hardened cutting edge to provide a clean cut every time
• 0.045” stripping hole, crusher, and two V-shaped stripping notches on the edges
• Ergonomically designed handle with dipped plastic grip for greater comfort and torque
• This product complies with ASME B107.11 and ISO 5749 standards

JONARD JIC-2288 - PLIERS, DIAGONAL CUTTER 8"

High Leverage Diagonal Cutter - JIC-2288. Crafted for heavy-duty wire cutting and made from chrome vanadium steel designed for strength and cutting ability.

Jonard’s diagonal cutting pliers are made of polished chrome vanadium steel and are heat-treated for maximum strength and durability.
These diagonal cutting pliers feature the following:

• Induction-hardened cutting edge to provide a clean cut every time
• Crafted with an angled head for heavy-duty wire cutting in confined spaces
• Ergonomically designed handle with dipped plastic grip for greater comfort and torque
• High leverage design for superior cutting ability
• This product complies with ASME B107.11 and ISO 5749 standards

Jonard’s curved long nose pliers are made of heat treated carbon steel for maximum strength and durability.
These curved long nose pliers feature the following:

• 70° bend angle to provide maximum visibility while working in confined spaces
• Knurled jaws for sure wrapping and looping
• Ergonomically designed handle with dipped plastic grip for greater comfort and torque

Jonard’s curved long nose pliers are made of heat treated carbon steel for maximum strength and durability.
These curved long nose pliers feature the following:

• 60° bend angle to provide maximum visibility while bending and forming fine wire in confined spaces
• Inside jaws and jaw edges are polished to prevent wire nicking
• Handles are spring-loaded for automatic opening
• Ergonomically designed handle with dipped plastic grip for greater comfort and torque

Jonard’s pump pliers are made of ultra strong tool steel and are heat treated for maximum strength and durability.
These pump pliers feature the following:

• Secure tongue and groove design to provide a slip-resistant grip and ability to withstand heavy pressure
• Six tongue and jaw positions with smooth, positive interlock between halves for comfort and versatility
• Maximum jaw opening of 1 3/4” (44 mm) for a broad range of applications
• Ergonomically designed handle with dipped plastic grip for greater comfort and torque

Jonard’s pump pliers are made of ultra strong tool steel and are heat treated for maximum strength and durability.
These pump pliers feature the following:

• Secure tongue and groove design to provide a slip-resistant grip and ability to withstand heavy pressure
• Seven tongue and jaw positions with smooth, positive interlock between halves for comfort and versatility
• Maximum jaw opening of 2 1/4” (57.2 mm) for a great range of applications
• Ergonomically designed handle with dipped plastic grip for greater comfort and torque

Jonard’s pump pliers are made of ultra strong tool steel and are heat treated for maximum strength and durability.
These pump pliers feature the following:

• Secure tongue and groove design to provide a slip-resistant grip and ability to withstand heavy pressure
• Four tongue and jaw positions with smooth, positive interlock between halves for comfort and versatility
• Maximum jaw opening of 1” (25.4 mm) for a great range of applications
• Ergonomically designed handle with dipped plastic grip for greater comfort and torque

Jonard’s lineman’s pliers are made of heat treated chrome vanadium steel with induction-hardened cutting edges for maximum strength and durability.
These lineman’s pliers feature the following:

• Ability to cut easily through bolts, nails, ACSR, and many gauges of high strength wire
• Cross hatched knurled jaws to ensure a tight grip
• Rivet design to ensure smooth movement and eliminate side-play
• Thick plastic dipped handles (~0.07”) for increased comfort and reduced vibrations while cutting

Jonard’s cable cutters are made of chrome vanadium steel with induction-hardened cutting edges for maximum strength and durability.
These cable cutters feature the following:

• Specifically designed for coax cables with steel center conductor
• Tested for over 25,000 cuts on CCSC (copper clad steel center) conductor cables without degradation of cutting edges
• Ergonomically designed handle with dipped plastic grip for greater comfort and torque
• This product is not for use on steel or ACSR type cable

Jonard’s cable cutters are made of chrome vanadium steel with induction-hardened cutting edges for maximum strength and durability.
These cable cutters, also known as Banana Cutters, feature the following:

• Designed to cleanly cut up to 3/4” hard line coaxial cable and larger fiber cables without compressed or frayed ends
• Eliminates cable distortion during prep by functioning like a tube cutter
• Ergonomically designed handle with dipped plastic grip for greater comfort and torque
• This product is not for use on steel cables

Jonard’s diagonal cutting pliers are made of polished chrome vanadium steel and are heat-treated for maximum strength and durability.
These diagonal cutting pliers feature the following:

• Induction-hardened cutting edge to provide a clean cut every time
• 0.030” and 0.045” stripping holes, crusher, and two V-shaped stripping notches on the edges
• Ergonomically designed handle with dipped plastic grip for greater comfort and torque
• This product complies with ASME B107.11 and ISO 5749 standards

Jonard’s long nose and side cutting pliers are made of heat treated chrome vanadium steel with induction-hardened cutting edges for maximum strength and durability.
These long nose and side cutting pliers feature the following:

• Ability to grip small wires and parts in tight spaces
• Knurled and serrated jaws for maximum grip side cutting blades
• Ergonomically designed handle with dipped plastic grip for greater comfort and torque

Leather construction. Long-nose pliers may protrude through opening at bottom. Holds 8'' (203 mm) or 9'' (229 mm) long-nose or diagonal-cutting pliers.

Pliers, Rule and Screwdriver Holder. Pockets for 7", 8" and 9" side-cutting pliers, most screwdrivers, 6' folding rules, and open end wrenches from 9/16 to 13/16. Belt connection slotted and belt width is 2in. Pocket Tool Pouch Klein 5118PRS

Includes: Heavy Duty Side Cutting Pliers (Cat. No. D2000-9NE). Klein-Kurve® Wire Stripper (Cat. No. 11055). Phillips-Tip Screwdriver, 4'' round shank (Cat. No. 603-4). 4-Pocket Leather Tool Pouch, riveted for extra durability (Cat. No. 5119). Lightweight Utility Belt (Cat. No. 5204). 4-Pocket Leather Tool Pouch, riveted for extra durability (Cat. No. 5119)

• Plastic replacement handles for slip-resistant grip and comfort
• Fit these to an existing pair of 8-Inch (203 mm) to 9-Inch (229 mm) pliers
• To install, place open end of grip in hot tap water to within one inch of plugged end for approximately one minute, drive grip onto pliers handle.
• Made in USA

• Pliers with angled head design for easy work in confined spaces
• Diagonal Cutters are ideal for cutting ACSR, screws, nails, and most hardened wire
• High-leverage design. Rivet is closer to the cutting edge for 36-percent greater cutting power than other plier designs
• Short jaws and beveled cutting edges permit close cutting of wire
• Made in USA with custom, US made tool steel
• Induction-hardened cutting knives for long life
• Hot-riveted joint ensures smooth action and no handle wobble
• Plastic-dipped handles for comfort and ease of identification

• Pliers tighten 1/2-Inch (13 mm) and 3/4-Inch (19 mm) EMT or 1/2-Inch (13 mm) rigid locknuts
• Fits liquid tight fittings and caps
• Reams and smoothes both inside and outside of conduit
• Knurled jaws at nose tip pull wire or fish tape and machined nose fits snugly into locknut wings
• Forged in the USA with custom, US-made tool steel for maximum durability

Klein Tools 10 inch (254 mm) Pump Pliers feature a secure tongue and groove design for a non-slip grip even when heavy pressure is applied. It has a tension-loaded joint to reduce handle wobble for sure gripping. Plastic-dipped handles provided added comfort and ease of identification.

• Quick-Adjust Rivet allows one-handed fast, easy adjustment of plier jaws
• 1-3/4'' (44 mm) maximum parallel jaw opening for a range of applications
• Smoothly adjusts between six machined tongue and groove jaw positions
• Secure tongue and groove design for non-slip grip -- even with heavy pressure
• Robust teeth for sure gripping action
• Induction hardened jaws for long life

Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol. Two layers of insulation provide protection against electric shock. Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool. Wide range of versatile jaw positions. Secure tongue and groove design for non-slip grip - even with heavy pressure.

• Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol
• Two layers of insulation provide protection against electric shock
• Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool
• Wide range of versatile jaw positions
• Secure tongue and groove design for non-slip grip - even with heavy pressure
• A flame retardant, impact-resistant, bright orange outer coating
• Integral guards help prevent hand contact with conductive parts

• Type: Pump
• Application: For work near energized sources
• Overall Length: 10.25" (1.2 cm)
• Jaw Capacity: 0.484" (4.5 cm)
• Handle Color: Orange/Gray
• Handle Finish: 3-Layer
• Handle Length: 5.5" (14 cm)
• Handle Material: High-Dielectric Plastic
• Insulated: Yes

• Quickly installs and removes spring-tension hose clamps
• Grips with either end or side of jaws for work in confined areas
• Nickel-chrome plated for durability and corrosion resistance
• Two-position jaws provide greater operating range and applications
• Plastic-dipped handles enhance comfort and grip
• Do NOT use to cut steel or ACSR

• Pliers hinge opening holds and cleans 5/8-Inch (1.6 cm) pole line and hardware bolts or threaded rods
• High-leverage design. Rivet is closer to the cutting edge for 46-percent greater cutting and gripping power than other plier designs
• Induction hardened cutting knives for long life
• Hot-riveted joint ensures smooth action and no handle wobble
• Made in USA with Custom, US-made tool steel
• Streamlined design with rounded nose and sure-gripping, cross-hatched knurled jaw
• Unique handle tempering helps absorb the ''snap'' when cutting wire
• Precision-hardened plier head for on-the-job toughness
• Heavy-duty, oversized plastic-dipped handles for comfort and ease of identification
• ''Handform'' handles for full gripping and cutting power

• High-leverage pliers with rivet closer to the cutting edge for 36-percent greater cutting power than other plier designs
• Diagonal Cutters have short jaws and beveled cutting edges for close cutting of wire
• Induction-hardened cutting knives for long life
• Hot-riveted joint ensures smooth action and no handle wobble
• Made in USA with Custom, US-made tool steel
• State-of-the-art, dual-material Journeyman™ handles provide a better grip without sacrificing tool strength and durability
• Hard, black material for toughness and durability
• Soft material on outer surface for comfort and a firm grip
• Color-coded handles allow quick identification of tool

• Pliers with quick-Adjust rivet allow one-handed fast, easy adjustment of plier jaws
• Smoothly adjusts between six machined tongue and groove jaw positions
• Secure tongue and groove design for non-slip grip - even with heavy pressure
• Wide range of versatile jaw positions
• Made in USA
• Tension-loaded joint to reduce handle wobble for sure gripping
• Dual material Journeyman™ handles for added comfort and durability

• Includes split ring to tether level while working at height
• Powerful Rare Earth magnets, up to 5X stronger than strip magnets, hold firmly to iron and steel surfaces
• Strong, extruded aluminum frame features a convenient built-in hang hole
• Top-read level window simplifies viewing in tight areas
• Handy V-grooved edge for pipe and conduit work
• Large, highly visible vials: plumb, level and 45 degree
• Tether not included

• Pliers with split ring for tethering for fall protection while working at height
• High-leverage design has 46-percent more cutting power
• Hot riveted joint ensures smooth action and no handle wobble
• Induction hardened cutting knives for long life
• Made in USA with Custom, US-made tool steel
• ''Handform'' handles for full gripping and cutting power
• Tether not included

• Diagonal Cutters include split ring for tethering plier while working at height
• Pliers have high-leverage design for greater cutting and gripping power
• Short jaws and beveled cutting edges permit close cutting of wire
• Induction hardened cutting knives for long life
• Made in USA with Custom, US-made tool steel
• Hot riveted joint ensures smooth action and no handle wobble
• Plastic dipped handles for comfort and ease of identification
• Tether not included

A screw type grip used to temporarily fasten lashing wire under tension before placing a permanent clamp like or D or E lashing wire clamp. Grip works with any size lashing wire. Single groove accommodates any size strand.