Especially designed for use with the Chance portable anchor installer. This tool bolts directly to the installer's output flange or Kelly bar adapter having six 1/2" dia. holes on a 5-1/4" bolt circle. Adjustable pivoting plates accept rods from 3/4" to 1-1/4" diameter.

For manually-installed foundations, eyenut must be temporarily installed for installation. Has four holes on 5-1/4" bolt circle for attachment. Includes four 1/2" x 1-1/2" bolts, nuts and lockwashers.

3/4" X 7' Double Strand Anchor Rod 23,000 lbs Minimum Tensile Strength

• Used for guying utility poles.
• Used with all types of expanding anchors.
• Contoured to prevent damage to strand.
• Rods are threaded 3-1/2" and are assembled with a heavy square nut
• 23,000 Lbs. ultimate strength rating
• Hot Dip Galvanized

3/4" X 8' Double Strand Anchor Rod 23,000 lbs Minimum Tensile Strength

• Used for guying utility poles.
• Used with all types of expanding anchors.
• Contoured to prevent damage to strand.
• 3-1/2" minimum thread length on all rods.
• Minimum tensile strength is 23,000 lbs.
• A heavy square nut is attached to every anchor rod.
• Hot dip galvanized

J7428/ALL4155 Thimble eye anchor rod with nut for guying utility poles. Used with expanding anchors.

helix anchor, twist anchor, screw anchor. J7428

Thimble eye anchor rod with nut for guying utility poles. Used with expanding anchors.

helix anchor, twist anchor, screw anchor.

Thimble Eye Anchor Rod 5/8" x 7' J7417.
Thimble eye anchor rod with nut for guying. Used with expanding anchors.
helix anchor, twist anchor, screw anchor.

5/8" x 6'Single Strand Anchor Rod
Rods feature integral forged eye for use with expanding, cross plate and other similar anchors
Rods are threaded 3½" and are assembled with a heavy square nut 16,000 Lbs. ultimate strength rating Galvanized coating

Triple eye anchor rod with nut for guying utility poles.
Use with expanding and cross-plate anchors.

" Must Ship LTL Freight"

-Due to the 10 ft length, this must ship LTL Freight.
-Due to limited shipping cost calculations, when ordering several of these please call for accurate freight cost.

Triple Eye Anchor Rod 1 1/4 x 10' J7350

Triple eye anchor rod with nut for guying utility poles. Used with expanding anchors.

helix anchor, twist anchor, screw anchor.

Triple eye anchor rod with nut for guying utility poles. Used with expanding anchors.

helix anchor, twist anchor, screw anchor.

" Must Ship LTL Freight"

-Due to the 10 ft length, this must ship LTL Freight.
-Due to limited shipping cost calculations, when ordering several of these please call for accurate freight cost.

Triple Eye Anchor Rod Special Stamp. Marked under triple eye "26M" indicates pull strength on installed rod for inspection purposes. 26,0000 lb pull strength.
Use with expanding and cross-plate anchors.


" Must Ship LTL Freight"

-Due to the 10 ft length, this must ship LTL Freight.
-Due to limited shipping cost calculations, when ordering several of these please call for accurate freight cost.

Triple Eye Anchor Rod Special Stamp "26M" H-J7340/HUB400261046 1" X 10ft.

Triple Eye Anchor Rod Special Stamp. Marked under triple eye "C-1-10" indicates length and size of installed rod for inspection purposes.
Use with expanding and cross-plate anchors.

" Must Ship LTL Freight"

-Due to the 10 ft length, this must ship LTL Freight.
-Due to limited shipping cost calculations, when ordering several of these please call for accurate freight cost.



Triple Eye Anchor Rod Special Stamp *Special Stamp" C- 1-10" H-J7340/HUB 7570 1"X10'

Triple Eye Anchor Rod Special Stamp "36M" 1 1/4 x 10' H-J7350. Marked under triple eye "36m" to indicate 36,000 pull strength for inspection purposes.
Use with expanding and cross-plate anchors.

" Must Ship LTL Freight"

-Due to the 10 ft length, this must ship LTL Freight.
-Due to limited shipping cost calculations, when ordering several of these please call for accurate freight cost.

Triple Eye Anchor Rod Special Stamp "36M" 1 1/4 x 10' H-J7350-HUB400261053.

Triple Eye Anchor Rod Special Stamp "58M" 1-1/4" x 10ft. H-J7350. Marked under triple eye "58m" to indicate 58,000 lb. pull strength for inspection purposes.
Use with expanding and cross-plate anchors.

" Must Ship LTL Freight"

-Due to the 10 ft length, this must ship LTL Freight.
-Due to limited shipping cost calculations, when ordering several of these please call for accurate freight cost.

Triple Eye Anchor Rod Special Stamp "58M" 1 1/4 x 10' H-J7350-HUB-7574-1-1/4" X 10ft.

Thimble eye anchor rod with nut for guying utility poles. Used with expanding anchors.

helix anchor, twist anchor, screw anchor.

Anchor, No Wrench, Extension, x 72in Tripleye