AB STRAP Without Buckle 50' 1075
Used in conjunction with buckles (part no. 1072) to support cables from strand. abstrap reels are uncut 50 foot lengths of plastic lashing strap. no sharp edges for installer to cut hands on while tensioning. the strapping is housed in a plastic reel that makes dispensing easy. Highly resistant to both UV (ultra violet) light and weather changes. High tensile strength after fastening.
BAND-IT 1-1/4" GIANT BUCKLE, EAR-LOKT STYLE G44229
BAND-IT® Ear-Lokt Buckles can be used with BAND-IT® Giant Band for superior fastening strength.
- 201 stainless steel offers good resistance to oxidation and many moderate corrosive agents
- Provides maximum strength
- Giant style buckle for use with 1 1/4" Band
- Installed with the C00369 Heavy Duty BAND-IT® Tool or G40269 Giant Tool
- Ear-Lokt style buckle for heavy duty applications, can hold a single or double wrapped band configuration
BAND-IT 201 Stainless Steel Band 3/4" X 100' BAND C20699 US MADE
BAND-IT 201 Stainless Steel Band 3/4" X 100' BAND C20699 STANDARD BOX
Now with EASY SCALE, a patented imprint on the band to determine band length. Eliminates costly waste and complicated measuring by allowing users to quickly and precisely roll out the length of band needed for any clamp. No more guesswork!
BAND-IT 201 Stainless Steel Giant Band 1-1/4" x 100' G43299 US MADE
Giant Band can be formed into a single or double wrapped clamp configuration, and offers the widest and thickest band to provide maximum strength.
- Produced with 201 Stainless Steel in a shiny finish
- Offers good resistance to oxidation and many moderate corrosive agents
BAND-IT 3/4" Buckle, Ear-Lokt Style C25699 (Box of 100)
BAND-IT Ear-Lokt Buckles can be used with many types of stainless-steel banding providing superior fastening strength. 100 box
- Ear-Lokt style buckle for standard duty applications including hose assemblies, cable bundling and general fastening,
- 201 Stainless Steel offers good resistance to oxidation and many moderate corrosive agents
- Can hold a single or double wrapped band configuration
- Band clamps can be formed over any contour or shape
BAND-IT 3/4" GIANT BUCKLE, EAR-LOKT STYLE G44099
BAND-IT® Ear-Lokt Buckles can be used with BAND-IT® Giant Band for superior fastening strength.
- 201 stainless steel offers good resistance to oxidation and many moderate corrosive agents
- Provides maximum strength
- Giant style buckle for use with 1 1/4" Band
- Installed with the C00369 Heavy Duty BAND-IT® Tool or G40269 Giant Tool
- Ear-Lokt style buckle for heavy duty applications, can hold a single or double wrapped band configuration
BAND-IT 5/8" BUCKLE, EAR-LOKT STYLE C25599
BAND-IT Ear-Lokt Buckles can be used with many types of stainless-steel banding providing superior fastening strength. 100 box
- Ear-Lokt style buckle for standard duty applications including hose assemblies, cable bundling and general fastening
- 201 Stainless Steel offers good resistance to oxidation and many moderate corrosive agents
- Can hold a single or double wrapped band configuration
- Band clamps can be formed over any contour or shape
- Can be applied on BAND-IT® band with the following BAND-IT® tools: C00169, C00369, C07569
BAND-IT C20599 201 Stainless Steel Band 5/8" X 100'
BAND-IT 201 Stainless Steel Band 5/8" X 100' BAND-C20599STANDARD BOX
Now with EASY SCALE, a patented imprint on the band to determine band length. Eliminates costly waste and complicated measuring by allowing users to quickly and precisely roll out the length of band needed for any clamp. No more guesswork!
BAND-IT Giant Banding Tool Size 3/4" to 1-1/4" G40269
The G40269 is the strongest BAND-IT hand tool. This tool is designed for use with ¾", 1", 1-¼" width X .044" thick Giant Band & Buckle. Tool will tension beyond the limits of the 5500 lbs of force to yield 201 Stainless Steel Giant Band material.
Banding 1-1/4" x 100' Aluma-Form SSB-100 MADE IN USA (Currently Unavailable)
Aluma-Form band used to wrap around poles to hold attachments 10ft length. 1 1/4" wide 100ft length. Without drilling holes, Bolt-A-Band features a pre-cut, high quality stainless steel band with accompanying installation hardware. Adjust easily to fit most any size pole. Installs in just minutes with no special tools required.
Two buckles required for all band brackets and attachments.
Banding 3/4" x 100' x .30 Aluma-Form 201-SSB-100 MADE IN USA
Aluma-Form band used to wrap around poles to hold attachments 100ft length. 3/4" wide x .30 x 100ft length. Without drilling holes, Bolt-A-Band features a pre-cut, high quality stainless steel band with accompanying installation hardware. Adjust easily to fit most any size pole. Installs in just minutes with no special tools required.
Two buckles required for all band brackets and attachments.
Buckle 1-1/4" Alum-A-Form BAB-58
Bolt Clamp Used to hold together banding around pole with hardware attached without drilling holes. Adjust easily to fit most any size pole. Installs in just minutes with no special tools required. Two buckles required for all banded brackets and attachments
Buckle For 3/4" Banding Aluma-Form BAB-38
Bolt Clamp Used to hold together banding around pole with hardware attached without drilling holes. Adjust easily to fit most any size pole. Installs in just minutes with no special tools required.
Two buckles required for all band brackets and attachments.
Double Banded Standoff Bracket ALU-6B-ASO-8
ALU 6B-ASO-8 Double Banded Standoff Bracket,-WayTslot Band 6"riser8"wide Double Banded Only no thru-bolt No holes for thru-bolt or lags. Used in Heavy duty pole applications.
Banding and Two buckles required for all band brackets and attachments. These items must be purchased separately.
ISO BA205 201 Stainless Steel Black Coated Band. 5/8” x .030 x 100’
BAND-IT 201 Stainless Steel Band 3/4" X 100' BAND C20699 STANDARD BOX
Now with EASY SCALE, a patented imprint on the band to determine band length. Eliminates costly waste and complicated measuring by allowing users to quickly and precisely roll out the length of band needed for any clamp. No more guesswork!
ISO BA206 201 Stainless Steel Black Coated Band. 3/4” x .030 x 100’
BAND-IT 201 Stainless Steel Band 3/4" X 100' BAND C20699 STANDARD BOX
Now with EASY SCALE, a patented imprint on the band to determine band length. Eliminates costly waste and complicated measuring by allowing users to quickly and precisely roll out the length of band needed for any clamp. No more guesswork!
ISO BA206K110 201 Stainless Steel Black Coated Band. 3/4” x .030 x 100’
BAND-IT 201 Stainless Steel Band 3/4" X 100' BAND C20699 STANDARD BOX
Now with EASY SCALE, a patented imprint on the band to determine band length. Eliminates costly waste and complicated measuring by allowing users to quickly and precisely roll out the length of band needed for any clamp. No more guesswork!
ISO BA432 201 Stainless Steel Black Coated Band. 1-1/4” x .044 x 100’
BAND-IT 201 Stainless Steel Band 3/4" X 100' BAND C20699 STANDARD BOX
Now with EASY SCALE, a patented imprint on the band to determine band length. Eliminates costly waste and complicated measuring by allowing users to quickly and precisely roll out the length of band needed for any clamp. No more guesswork!
ISO T402 Giant Banding Tool Size 3/4" to 1-1/4"
The G40269 is the strongest BAND-IT hand tool. This tool is designed for use with ¾", 1", 1-¼" width X .044" thick Giant Band & Buckle. Tool will tension beyond the limits of the 5500 lbs of force to yield 201 Stainless Steel Giant Band material.