* Made in the USA *
* Patent Pending *
V-Notch/Wedge-Stop resists movement on the strand. Wide head for large bundles and to prevent roller from moving under the cable lasher. AAEROLL100P will work with 3/16 to 7/16 Guy Strand
**Order 100 or more and save $.25 cents each**

* Made in the USA *
* Patent Pending *
V-Notch/Wedge-Stop resists movement on the strand. Wide head for large bundles and to prevent roller from moving under the cable lasher. AAEROLL300R will work with 3/16 to 7/16 Guy Strand

* Made in the USA *
V-Notch/Wedge-Stop resists movement on the strand. Wide head for large bundles and to prevent roller from moving under the cable lasher. AAEROLL275P will work with 3/16 to 7/16 Guy Strand

* Made in the USA *
* Patent Pending *
V-Notch/Wedge-Stop resists movement on the strand. Wide head for large bundles and to prevent roller from moving under the cable lasher. AAEROLL100P will work with 3/16 to 7/16 Guy Strand
**Order 100 or more and save $.25 cents each**

This Block is normally used for pulling in self support or prelashed cable and is mounted with either a B, C, D, E, or F Cable Block Frame at a pole.

The Dual-Lashing Aerial Cable Guide is used to guide and straighten cables as they are pulled into a lashing position.

Temporarily supports any cable up to 2-3/4 in. (70 mm) diameter on 1/4 - 3/8". (6-10 mm) suspension strand during new construction or overlashing to existing lashed cable.

This block handles any cable or bundles up to 4" for temporarily supporting during stringing operations.

This economical but durable guide meets the requirements for new strand construction only. The cable shoe can accommodate a 3" cable.

This overlash cable block is perfect for temporarily suspending any cable up to 2 3/4 (70 mm) diameter on 1/4 - 3/8in (6-10 mm) diameter.

Jameson Versa Block with Rubber Roller is ideal for use with cable up to 1.5" in diameter. Versa Blocks offer the versatility of stringing cable at midspan on new and existing overlash construction. Provides easy cable placement from aerial buckets or the ground when used with Jameson's lay-up sticks and wire raising tool. Low-profile frame reduces cable damage as it passes through block and wide keeper arm accommodates large cable bundles when used as overlash block.

The larger aluminum roller supports up to a 2” diameter cable for new construction or overlash operations, it also works well with winch lines.

This lightweight block is used to support up to 1” diameter cable during pull-out. The A-frame block fits over existing cable up to 2¼” in diameter.

The large rubber roller supports up to a 1-1/2" diameter cable for new construction or overlash operations, it also works well with winch lines.

This versatile block locks on 1/4" strand or fits over a 2-3/4" package of previously lashed cables. The frame will not snag loose lashing wire.

This versatile block locks on 1/4" strand or fits over a 2-3/4" package of previously lashed cables. The frame will not snag loose lashing wire.

Used to push cable blocks along strand up to 16” diameter during lashing operations. Shotguns are fabricated of a steel tube and bearing flanges.

This unit is designed to pull out up to four cables and works on packages up to 2 3/4" diameter. Opposing roller arms retain the puller to the existing cable and offer quick pole transfer.

The feeder block is used to pull out a single cable up to 1" diameter during pull out and lashing operations.

This lightweight block w/ Aluminu Roller is used to support up to 1-1/4” diameter cable during pull-out. The A-frame block fits over existing cable up to 2¼” in diameter.

Slide Stop - Dual 1" plastic rollers. This cable roller comes with two separated 1" channels for pulling multiple cables in overlash construction.

1" slap-on overlash cable roller Order 100 or more and get $1 discount at checkout.

Affordable and Built to Last Also known as slap on roller, clip on, roller, fiber roller, overlash roller, coffin roller, overlash blocks, cable rollers

Ruegg R0100 Overlash Cable Roller

Slide Stop - 3" rubber roller Designed prevent cables from catching or snagging. Supports cables up to 3" in diameter including fiber optic cables.

Slide Stop - 3" rubber roller Designed prevent cables from catching or snagging. Supports cables up to 3" in diameter including fiber optic cables.