Condux 08675675 Open Style Fiber Optic Cable Pulling Trailer (Trailer Only)

***Please call 1-800-256-5186 for a current quote on this trailer.

THIS ITEM IS FOR THE TRAILER WITH TOOL BOX ONLY -- Condux 08675675

FIBER OPTIC CABLE PULLER, POWER PACK, CAPSTAN, AND ACCESSORIES SOLD SEPARATELY (See links below).

Access job sites with ease using the Condux Open Style Fiber Optic Cable Puller Trailer. The open style has advantages in portability, accessibility and cost. On the job, gain easy access to all components with the open face design. Small items can be stowed in a lockable storage compartment. Leveling and stabilizing hardware is included. The Open Face Fiber Optic Cable Puller Trailer comes standard with built-in cable puller mounts on the left and right rear corners. Options include a choice of two Condux Fiber Optic Cable Puller packages, choice of four capstans, a 13 HP (9.7 kW) Power Pack and a Remote Mounting Stand. The trailer bed is designed to accommodate standard and optional equipment with built-in mounting systems for secure travel.

Fiber Optic Cable Puller Options:
Condux 08690002 Fiber Optic Cable Puller Package 1 (NO CAPSTAN)
Condux 08690055 Fiber Optic Cable Puller Package 3 W/Chart Recorder (NO CAPSTAN)

Fiber Optic Cable Power Pack:
Condux 08675702 13HP Portable Hydraulic Power Pack

Fiber Optic Cable Puller Capstan Wheels:
Condux 08675430 Capstan Wheel 30" x 8"
Condux 08675230 Capstan Wheel 30" X 4"
Condux 08675436 Capstan Wheel 42" x 8"
Condux 08675220 Capstan Wheel 50" x 8"

Fiber Optic Cable Puller Optional Stand:
Condux 08675115 Remote Mounting Stand

STANLEY HP8BD HYDRAULIC POWER UNIT

The HP8 hydraulic power unit is engineered for continuous professional use and is optimized to deliver ideal flows and pressures to both Type 1 and Type 2 hydraulic tools. Its powerful 18 HP Briggs & Stratton engine and best-in-class cooling system deliver the power and heat rejection pros need to keep tools working uninterrupted all day in all types of conditions. The HP8 features an intuitive throttle selector which makes changing flow rates very easy. Its feature-rich, dependable operation make the HP8 the workhorse of the industry.

Manta Ray Load Locker KIT 50127, Hydraulic Control Valve and Plate LL-1

1. The Manta Ray load locker Manta Ray LL-1 is required to load lock and proof test the anchor. It is a double acting hollow 20,000Lbs hydraulic jack with a base reaction plate and a direct reading gauge. The load locker can be used with the same hydraulic from the line truck used to drive the jack hammer.The base plate is designed for anchors that are installed at an angle to the ground. It has a large bearing surface and a small cross member. For angled guy anchors the two cross members should be placed toward the tower and perpendicular to the axis of the anchor rod. The kit includes the Manta LL-1FPM 50141 20,000 Lbs (10) Ton Load Locker, Manta LL-3 50134 Base Plate, Manta LL-1FPM Homak 32in. Industrial Steel Storage box ,Manta LL-1ASB 50132 Adapter Load Locker Setting Bar, Manta LL-1TJ 50148 Tapered Jaw set, 5/32 Hex Driver 51188 (For adjustment of the Bypass Valve on LL-1FPM) and Manual.
   

STANLEY HYDRAULIC JACKHAMMER [1-1/4 inch] BR87130

The Stanley BR87 Hydraulic Jack Hammer is a heavy duty tool for work in the 90 pound class and above for 8+" Manta Ray Installation, & concrete applications. It is highly productive in utility construction, street maintenance, repair of water and gas mains, and general contracting jobs. A feathering on/off valve controls speed, making start up and initial tool placement easy. A diaphragm accumulator provides trouble free operation and will handle system back pressures up to 250 psi (17 bar) Operates on open center systems and is available in 1-1/8 or 1-1/4 inch chuck hex sizes.

STANLEY Hydraulic Handheld Breakers T-Handle, Shank 1-1/8" - Hex 6" Class 70 BR67120

With the best power-to-weight ratio, higher blow energy, and lower noise level than pneumatic breakers. 70-lb. class breakers deliver roughly the same impact energy as most 90-lb. pneumatic.

SPECIFICATIONS

• BREAKER CLASS 70
• SHANK SIZE 1-1/8in
• HEX LENGTH 6in
• T-HANDLE
• FOOT STANDARD
• FLOW RANGE 7-9gpm

When sizing the appropriate breaker for the application use 10 pounds for each inch of material. A 40-pound breaker is a good fit for 4-inch concrete and a 90-lb breaker is ideal 9-inch + concrete.

STANLEY Hydraulic Handheld Breakers T-Handle BR45150

With the best power-to-weight ratio, higher blow energy, and lower noise level than pneumatic breakers. 70-lb. class breakers deliver roughly the same impact energy as most 90-lb. pneumatic.

SPECIFICATIONS

• BREAKER CLASS 40
• SHANK SIZE 1in
• HEX LENGTH 4-1/4in
• T-HANDLE
• FOOT STANDARD
• FLOW RANGE 7-9gpm

When sizing the appropriate breaker for the application use 10 pounds for each inch of material. A 40-pound breaker is a good fit for 4-inch concrete and a 90-lb breaker is ideal 9-inch + concrete.

MANTA 50244 SGC 18 Kit 1-1/8" x 6" chuck hammer/breakers SGC-18

The SGC-18 drive steel kit, or a GADD set, used to drive and install Manta Ray Anchors.
Designed for 1-1/8" x 6" chuck hammer/breakers SGC-18
Sets are 8' total length: include shank, 3 couplers, 2 extensions, 1 drive tip, gad extractor bar, & carrying bag

MANTA 50243 SGC 14 Kit 1-1/4" x 6" chuck hammer/breakers

The SGC-14 drive steel kit also a GADD set will install the drive Manta Ray Anchors.
For 1-1/4" x 6" chuck hammer/breakers
Sets are 8' total length: include shank, 3 couplers, 2 extensions, 1 drive tip, gad extractor bar, & carrying bag

STANLEY Hydraulic Handheld Breakers T-Handle Shank 1-1/8"-Hex 6", Class 40 BR45120

With the best power-to-weight ratio, higher blow energy, and lower noise level than pneumatic breakers. 70-lb. class breakers deliver roughly the same impact energy as most 90-lb. pneumatic.

SPECIFICATIONS

• BREAKER CLASS 40
• SHANK SIZE 1-1/8in
• HEX LENGTH 6in
• T-HANDLE
• FOOT STANDARD
• FLOW RANGE 7-9gpm

When sizing the appropriate breaker for the application use 10 pounds for each inch of material. A 40-pound breaker is a good fit for 4-inch concrete and a 90-lb breaker is ideal 9-inch + concrete.

MANTA LL-2 LOAD LOCKER 50172

Light Duty Hand Pump.The LL-2 Anchor Locking kit is designed to Load Lock and proof test Small Manta Ray and Duckbill anchors. It is manually operated and has a maximum capacity of 8000
pounds (36kN). It can accommodate anchors installed vertically or at angle to the
ground. The anchor capacity is easily read on the included gauge. The design of the LL-2
is such that the load on the anchor in pounds is equal to the pressure in psi (pounds per
square inch) as read on the gauge. It includes an accessory kit to allow attachment to
anchors equipped with SAR-58 style anchor rods, AT-16 (1/2” UNC) or AT-12 (3/8”
UNC) anchor rods, or cabled anchors. The kit also includes a Rod Clamp and cable sling
accessory to allow gripping of SAR-58 Style anchors below the ends of the threads.

APT M137 ROCK DRILL Chuck Dry Drilling Models

ROCK DRILL M137 Chuck Size 7/8 x 3-1/4", 7/8 x 4-1/4" or 1 x 4-1/4"

The APT Model 137 Rock Drill is a versatile, mid-sized rock drill used in general construction, utility work and plant maintenance. It is designed for drilling through granite, hard faced rock, quarry drilling and for drilling secondary holes for blasting. It can also be used in conjunction with dowel hole drilling machinery.
The Model 137 is adaptable to wet drilling by attaching the APT valve, wet tube and swivel assembly.
5223 - M137 ROCK DRILL, 7/8 X 3-1/4", 5225 - M137 ROCK DRILL, 7/8 X 4-1/4", 5227 - M137 ROCK DRILL, 1 X 4-1/4"

APT 5239 - 190 Paving Breaker 1-1/8X6"

APT 5239 M/190 90# JACKHAMMER 1-1/8"X6" PAVING BREAKER
Tough and dependable, the high performance Model 190 Paving Breaker or Jack Hammer is the most powerful tool American Pneumatic Tool makes. 1-1/8 Shank. It is designed for big jobs such as heavy demolition and concrete breaking. Since the Model 190 has the ability to penetrate the hardest concrete it is the choice for road building and foundation removal.
The 190 is now equipped with the patented Automatic Ball Valve.

• Model: 190
• Chuck Size (hex): 1-1/8″ x 6″
• Bore Diameter (inches): 2-5/8″
• Stroke (inches) 6-1/8″
• Blows per Minute 1350 CFM @ 90 psi 75 - 80

APT 5200 - 117 Paving Breaker 1 x 4-1/4"

APT 5200 M/117 30# JACKHAMMER 1"x4-1/4" PAVING BREAKER
This 30 lb class Paving Breaker is an ideal tool for light to medium demolition work as well as for use in confined areas. This lightweight tool will break up concrete floors, and can be used in any other type of general demolition work.
The M117 is now equipped with the patented Automatic Ball Valve. (Pat. # 8,276,682 B2)

• Model: 117
• Chuck Size (hex): 1" x 4-1/4"
• Bore Diameter (inches): 1-3/4
• Stroke (inches): 3-3/8"
• Blows per Minute 1850 CFM @ 90 psi : 34-48

Manta Ray Tapered Jaw Set LL-1TJ 50148 for LL-1 Load Locker

Manta Ray 50148 LL-1TJ Tapered Jaw Set, is a key component for LL-1 Load Locker. The Taper Jaw provides grip to the Adapter Setting Bar which is pulls upward on the anchor rod and tips the anchor underground.
*Taper Jaw Only*

CLAY SPADE 1 1/4 X 6 BRUNNER & LAY #B40400 1 1/4" X Stanley 04405

CLAY SPADE 1 1/4 X 6 BRUNNER & LAY #B40400 1 1/4" X
Stanley Hydraulic Tools Clay Spade 8" ( 20.3 cm ) for Handheld Breakers BR45/BR50/BR67/BR87

Manta Ray Hydraulic Hose 25' HC-16-25 50087 with HTMA-3A Coupler *EACH*

Manta Ray HC-16-25, a 25' (7.6m) Hydraulic Hose with HTMA-3A Flush Face Coupler. A minimum of two sections of hoses are required for the Manta Ray or Pole Pulling systems. Up to four sections will provide the maximum versatility.

*Two are required for Manta Ray and/or Pole Puller Operations*

Manta Ray Radiused Drive Tip 30" SG-3 50236, for Drive Steel Set

Manta Ray 50236 SG-3, Radiused Drive Tip 30", this piece is shaped to fit into the anchor on one end and threaded on the other end to accept a coupler. The SG drive steel uses a partial left hand thread that allows very efficient impact energy transfer from the jack hammer
to the anchor. All joints should be lubricated with light oil or spray lubricant prior to assembly. After installing an anchor
the drive steel joints should be cleaned of dirt which will enter the couplers during driving. Failure to clean and lubricate
the drive steel and couplers will result in premature failure.

Manta Ray Drive Steel Extension Piece 33" SG-2 50233

Manta Ray 50233 SG-2, a 33" Drive Steel Extension is a
patented design made of high performance materials. It allows the anchor to be driven to depth in discrete increments
to allow installation in tight spaces while the operators remain safely on the ground. The anchor is threaded on both sides to accept a coupler for further length. The SG drive steel uses a partial left hand thread that allows very efficient impact energy transfer from the jack hammer
to the anchor. All joints should be lubricated with light oil or spray lubricant prior to assembly. After installing an anchor
the drive steel joints should be cleaned of dirt which will enter the couplers during driving. Failure to clean and lubricate
the drive steel and couplers will result in premature failure.

MANTA 50231 SG 14 1-1/4" x 6" chuck shank /breakers SG-14

1-1/4" hex x 6" shank,

MANTA 50655 SG-4HD HEAVY DUTY COUPLER

MANTA 50655 SG-4HD HEAVY DUTY COUPLER