You are here: Home > Pole Line Hardware > Machine Bolts Galvanized > Machine Bolts > Machine Bolts 3/4"
We found 14 results matching your criteria.
Machine Bolt 3/4"
Sort By:
1
3/4" x 6" Square Head Machine Bolt with Nut MSI J8906 Square Head Machine Bolt with Nut 3/4" x 6" MSI J8906

Used for fastening poleline hardware to crossarms, poles, and other structures.

  • Has a formed "cone point" to ease attachment of nut.
  • Allied Bolt marking (ABI) appears on the head of each bolt.
  • Hot dip galvanized to meet ASTM Specification F2329.
  • Supplied with attached square nut.
  • Minimum tensile strength: 20,050 lbf.
  • Recommended torque value: 130 ft lb.
  • Minimum thread length is 6".
  • Material conforms to ASTM specification A307.
  • Dimensions conform to ASME B18.2.1.
Allied Bolt 8153 3/4" X 6" SQUARE HEAD MACHINE BOLT WITH NUT

Our Price: $2.34
3/4" x 8" Square Head Machine Bolt with Nut Allied Bolt 8238 Square Head Machine Bolt with Nut 3/4" x 8" Allied Bolt H-J8908/ALL8238

Used for fastening poleline hardware to crossarms, poles, and other structures.

  • Has a formed "cone point" to ease attachment of nut.
  • Allied Bolt marking (ABI) appears on the head of each bolt.
  • Hot dip galvanized to meet ASTM Specification F2329.
  • Supplied with attached square nut.
  • Minimum tensile strength: 20,050 lbf.
  • Recommended torque value: 130 ft lb.
  • Minimum thread length is 6".
  • Material conforms to ASTM specification A307.
  • Dimensions conform to ASME B18.2.1.
Maclean J8908 Machine Bolt 3/4 INCH DIAMETER - MINIMUM TENSILE STRENGTH 20,050 LBS

Our Price: $2.71
3/4" x 10" Square Head Machine Bolt with Nut MSI J8910 Square Head Machine Bolt with Nut 3/4" x 10" MSI J8910

Used for fastening poleline hardware to crossarms, poles, and other structures.

  • Has a formed "cone point" to ease attachment of nut.
  • Allied Bolt marking (ABI) appears on the head of each bolt.
  • Hot dip galvanized to meet ASTM Specification F2329.
  • Supplied with attached square nut.
  • Minimum tensile strength: 20,050 lbf.
  • Recommended torque value: 130 ft lb.
  • Minimum thread length is 6".
  • Material conforms to ASTM specification A307.
  • Dimensions conform to ASME B18.2.1.
Allied Bolt 8240 3/4" x 10" Square Head Machine Bolt with Nut

Our Price: $3.36
3/4" x 14" Square Head Machine Bolt with Nut MSI J8914 Square Head Machine Bolt with Nut 3/4" x 14" MSI J8914

Used for fastening poleline hardware to crossarms, poles, and other structures.

  • Has a formed "cone point" to ease attachment of nut.
  • Allied Bolt marking (ABI) appears on the head of each bolt.
  • Hot dip galvanized to meet ASTM Specification F2329.
  • Supplied with attached square nut.
  • Minimum tensile strength: 20,050 lbf.
  • Recommended torque value: 130 ft lb.
  • Minimum thread length is 6".
  • Material conforms to ASTM specification A307.
  • Dimensions conform to ASME B18.2.1.
Allied Bolt 8244 3/4" X 10" SQUARE HEAD MACHINE BOLT WITH NUT, Hubbell 8914 BOLT, MACHINE, SQ HEAD, 3/4in x 14in

Our Price: $3.61
3/4" X 30" Square Head Machine Bolt with Nut Allied Bolt 8930 Square Head Machine Bolt with Nut 3/4" X 30" Allied Bolt 8930

Used for fastening poleline hardware to crossarms, poles, and other structures.

  • Has a formed "cone point" to ease attachment of nut.
  • Allied Bolt marking (ABI) appears on the head of each bolt.
  • Hot dip galvanized to meet ASTM Specification F2329.
  • Supplied with attached square nut.
  • Minimum tensile strength: 20,050 lbf.
  • Recommended torque value: 130 ft lb.
  • Minimum thread length is 6".
  • Material conforms to ASTM specification A307.
  • Dimensions conform to ASME B18.2.1.

Our Price: $4.07
3/4" x 12" Square Head Machine Bolt with Nut MSI J8912 Square Head Machine Bolt with Nut 3/4" x 12" MSI J8912

Used for fastening poleline hardware to crossarms, poles, and other structures.

  • Has a formed "cone point" to ease attachment of nut.
  • Allied Bolt marking (ABI) appears on the head of each bolt.
  • Hot dip galvanized to meet ASTM Specification F2329.
  • Supplied with attached square nut.
  • Minimum tensile strength: 20,050 lbf.
  • Recommended torque value: 130 ft lb.
  • Minimum thread length is 6".
  • Material conforms to ASTM specification A307.
  • Dimensions conform to ASME B18.2.1.
Hubbell 8912 BOLT, MACHINE, SQ HEAD, 3/4in x 12in,

Our Price: $6.61
3/4" x 22" Square Head Machine Bolt with Nut MSI J8922 Square Head Machine Bolt with Nut 3/4" x 22" MSI J8922

Used for fastening poleline hardware to crossarms, poles, and other structures.

  • Has a formed "cone point" to ease attachment of nut.
  • Allied Bolt marking (AB) appears on the head of each bolt.
  • Hot dip galvanized to meet ASTM Specification F2329.
  • Supplied with attached square nut.
  • Minimum tensile strength: 20,050 lbf.
  • Recommended torque value: 130 ft lb.
  • Minimum thread length is 6".
  • Material conforms to ASTM specification A307.
  • Dimensions conform to ASME B18.2.1.
Allied Bolt 8252 Square Head Machine Bolt with Nut.

Our Price: $6.74
3/4" x 16" Square Head Machine Bolt with Nut MSI J8916 Square Head Machine Bolt with Nut 3/4" x 16" MSI J8916

Used for fastening poleline hardware to crossarms, poles, and other structures.

  • Has a formed "cone point" to ease attachment of nut.
  • Allied Bolt marking (ABI) appears on the head of each bolt.
  • Hot dip galvanized to meet ASTM Specification F2329.
  • Supplied with attached square nut.
  • Minimum tensile strength: 20,050 lbf.
  • Recommended torque value: 130 ft lb.
  • Minimum thread length is 6".
  • Material conforms to ASTM specification A307.
  • Dimensions conform to ASME B18.2.1.
Allied Bolt 8246 Square Head Machine Bolt with Nut, Hubbell 8916 BOLT, MACHINE, SQ HEAD, 3/4in x 16in

Our Price: $7.47
3/4" x 18" Square Head Machine Bolt with Nut MSI J8918 Square Head Machine Bolt with Nut 3/4" x 18" J8918

Used for fastening poleline hardware to crossarms, poles, and other structures.

  • Has a formed "cone point" to ease attachment of nut.
  • Allied Bolt marking (ABI) appears on the head of each bolt.
  • Hot dip galvanized to meet ASTM Specification F2329.
  • Supplied with attached square nut.
  • Minimum tensile strength: 20,050 lbf.
  • Recommended torque value: 130 ft lb.
  • Minimum thread length is 6".
  • Material conforms to ASTM specification A307.
  • Dimensions conform to ASME B18.2.1.
Allied Bolt 8248 Square Head Machine Bolt with Nut, Hubbell 8918 BOLT, MACHINE, SQ HEAD, 3/4in x 18in

Our Price: $8.30
3/4" x 20" Square Head Machine Bolt with Nut J8920 Square Head Machine Bolt with Nut 3/4" x 20" J8920

Used for fastening poleline hardware to crossarms, poles, and other structures.

  • Has a formed "cone point" to ease attachment of nut.
  • Allied Bolt marking (ABI) appears on the head of each bolt.
  • Hot dip galvanized to meet ASTM Specification F2329.
  • Supplied with attached square nut.
  • Minimum tensile strength: 20,050 lbf.
  • Recommended torque value: 130 ft lb.
  • Minimum thread length is 6".
  • Material conforms to ASTM specification A307.
  • Dimensions conform to ASME B18.2.1.
Allied Bolt 8250 Square Head and Square Nut, Hubbell 8920 BOLT, MACHINE, SQ HEAD, 3/4in x 20in

Our Price: $9.03
3/4" x 28" Square Head Machine Bolt with Nut MSI J8928 Square Head Machine Bolt with Nut 3/4" x 28" J8928

Used for fastening poleline hardware to crossarms, poles, and other structures.

  • Has a formed "cone point" to ease attachment of nut.
  • Allied Bolt marking (ABI) appears on the head of each bolt.
  • Hot dip galvanized to meet ASTM Specification F2329.
  • Supplied with attached square nut.
  • Minimum tensile strength: 20,050 lbf.
  • Recommended torque value: 130 ft lb.
  • Minimum thread length is 6".
  • Material conforms to ASTM specification A307.
  • Dimensions conform to ASME B18.2.1.

Our Price: $9.14
3/4" X 32" Square Head Machine Bolt with Nut Allied Bolt 82623 Square Head Machine Bolt with Nut 3/4" X 32" Allied Bolt 82623

Used for fastening poleline hardware to crossarms, poles, and other structures.

  • Has a formed "cone point" to ease attachment of nut.
  • Allied Bolt marking (ABI) appears on the head of each bolt.
  • Hot dip galvanized to meet ASTM Specification F2329.
  • Supplied with attached square nut.
  • Minimum tensile strength: 20,050 lbf.
  • Recommended torque value: 130 ft lb.
  • Minimum thread length is 6".
  • Material conforms to ASTM specification A307.
  • Dimensions conform to ASME B18.2.1.

Our Price: $9.60
3/4" x 24" Square Head Machine Bolt with Nut MSI J8924 Square Head Machine Bolt with Nut 3/4" x 24" J8924

Used for fastening poleline hardware to crossarms, poles, and other structures.

  • Has a formed "cone point" to ease attachment of nut.
  • Allied Bolt marking (ABI) appears on the head of each bolt.
  • Hot dip galvanized to meet ASTM Specification F2329.
  • Supplied with attached square nut.
  • Minimum tensile strength: 20,050 lbf.
  • Recommended torque value: 130 ft lb.
  • Minimum thread length is 6".
  • Material conforms to ASTM specification A307.
  • Dimensions conform to ASME B18.2.1.
Allied Bolt 8254 Square Head Machine Bolt with Nut .

Our Price: $9.63
3/4" x 26" Square Head Machine Bolt with Nut MSI J8926 Square Head Machine Bolt with Nut 3/4" x 26" MSI J8926

Used for fastening poleline hardware to crossarms, poles, and other structures.

  • Has a formed "cone point" to ease attachment of nut.
  • Allied Bolt marking (ABI) appears on the head of each bolt.
  • Hot dip galvanized to meet ASTM Specification F2329.
  • Supplied with attached square nut.
  • Minimum tensile strength: 20,050 lbf.
  • Recommended torque value: 130 ft lb.
  • Minimum thread length is 6".
  • Material conforms to ASTM specification A307.
  • Dimensions conform to ASME B18.2.1.

Our Price: $15.94
   
 
1