JONARD RTC-3652 360° Rotary Duct & Tube Cutter, 36 - 52 mm
Ring large HDPE or other similar fiber optic ducts, this rotary duct and tube cutter is perfect for making circular cuts in large fiber ducts without damaging the fiber inside.
Features:
- High carbon steel circular blades cut through HDPE or other similar materials with ease
- Makes circular cuts in fiber optic ducts and tubes up to 2" (52 mm) in diameter
- Ergonomic handles provide extra leverage when ringing fiber optic ducts
- Carbon Steel construction provides high durability and long life
JONARD JIC-1022 - WIRE STRIPPER 10-22 AWG
Designed to cut and strip the most commonly used stranded and single conductors, this wire stripper is the perfect tool for cutting and stripping wires 10 to 22 AWG (2.60 to 0.64 mm) and 2 mm-3 mm fiber jackets. This wire stripper features the following:
- Perfect for stripping 2 mm-3 mm fiber jackets off of fiber optic cables without damaging the fiber
- Coil spring reduces hand fatigue when using the tool for extended periods of time
- Conveniently located bending holes makes wire looping quick and easy
- Black oxide coated for corrosion resistance
- Cutting edges are hardened, tempered, and ground for superior cutting and stripping
JONARD WSS-1020 Stainless Steel Curved Wire Stripper, 10-20 AWG
Designed to cut and strip the most commonly used stranded and single conductors, this wire stripper is the perfect tool for cutting and stripping solid wires from 10 to 20 AWG (2.60 to 0.81 mm) and stranded wires from 12 to 22 AWG (2.05 to 0.65 mm).
Features
- 50 HRC stainless steel construction for precision stripping and enhanced durability
- Ergonomic curved handle design is naturally comfortable to hold and reduces hand fatigue
- Coil spring reduces hand fatigue when using the tool for extended periods of time
- Conveniently located bending holes makes wire looping quick and easy
- Includes cutting holes for 8-32 and 10-32 threaded screws
JONARD CST-1i Cyclops Wire Stripper
The CST-1i Cyclops Wire Stripper is the perfect tool for removing the outer insulation from all unshielded and shielded twisted pair and multicore cables.
Features
- Strips insulation off of cables that are 1/8”-3/8” (3.2 mm-9.6 mm) in diameter
- Self-adjusting blade strips PVC, plenum, and other types of insulation quickly and easily
- Safely strips insulation without damaging inner braids, foils, or conductors of cables
JONARD CSR-1575 Cable Strip & Ring Tool
Designed to slit and ring fiber optic cables from 1.2 mm to 7.5 mm (0.05” to 0.3”) in diameter, this cable slit and ring tool is perfect for slitting and ringing cables, buffer tubes, and jackets on fiber optic cables.
JONARD Adjustable Wire Stripper 18-28 AWG / 20-30 AWG / 26-36 AWG
Designed for stripping 18-28 AWG / 20-30 AWG / 26-36 AWG wire, this adjustable wire stripper is the perfect tool for stripping wires quickly and easily.
Features:
- Built-in adjustment dial makes changing the strip gauge quick and easy
- Adjustable stop allows the operator to strip wire at specific lengths from 0.039" to 2.0" long
- Lightweight and compact design weighs only 1 oz and measures 3.9" long
- Hardened steel blade cuts wire with great precision
- Can be heated up to 100°C in water for sterilization purposes
- ST-450 , ST-500 , ST-550
List Price: $70.25
Our Price: $36.47
You save $33.78!
JONARD FOD-2000 Fiber Optic Drop Cable Slitter
The Jonard Tools PATENTED and award-winning FOD-2000 Fiber Optic Drop Cable Slitter simplifies the slitting of drop cable jackets at mid span or end sections and is perfect for FTTH technicians working with flat fiber drop cables.
JONARD JIC-4366 Cable Slit & Ring Tool
Designed to slit and ring many types of tight buffers, loose tube buffers, breakout cables, and other types of jacketed fiber cables, this tool is perfect for any fiber technician.
Features"
- L-shaped hardened steel guide and blade guard are specially designed to allow the tool to slit open jackets while protecting the buffer tubes and fiber inside the cable
- The slitter blade is located at the top of the tool, has 1/4” of the blade exposed, and is held in place by the 3/4” L-shaped steel guide (longer guide than the JIC-4377)
- The Ringer portion of the tool is located on the back of the handle and uses a spring steel cable holder to hold the cable in place. This holder also has a sliding metal tensioner to increase the force on the cable and help ensure the jacket is cut all the way through
- Ringer can be used on 3/16"-1/2" (4.7 mm-12.7 mm) diameter cables and cuts through plastic, rubber, or fabric insulation sheathing with 0.031” (0.787 mm) or 0.018" (0.457 mm) thickness
Includes one spare ringing and one spare slitting blade
JONARD CST-25 Precision Cable Stripper, 6 to 25 mm
Designed to slit and ring hard outer sheathes on cables and plastic tubes, the CST-25 cable stripper is the perfect tool for opening cables and ducts 6 to 25 mm (1/4" to 1") in diameter. This tool also features the following:
- Blade can be fixed in the slitting or ringing positions using the swivel lever
- Blade height can be adjusted for precision stripping from 0 - 3 mm
- Hardened steel blade slices through hard jackets and tubes with ease
- High polymer construction for long life and durability
- Compact design is perfect for on-the-go use
JONARD WSA-1430 Self-Adjusting Wire Stripper Pro, 14-30 AWG
This self-adjusting wire stripper automatically grasps and strips insulation off 14-30 AWG wires. It is perfect for stripping thick or thin wall insulations such as PVC or other off 14-30 AWG wires at specific strip lengths without having to make tedious adjustments.
Features :
- Patented stripping mechanism strips smoothly and efficiently every time
- Strips insulation off single and multi-stranded wires and can strip multiple wires of the same gauge simultaneously
- Strip length can be adjusted manually up to 15 mm (0.591")
- Wire cutter cuts wires as large as 14 AWG cleanly and easily
- Ergonomically designed to minimize hand fatigue during prolonged use
- High-quality laminated carbon steel stripping blades last over 30,000 strips and the tool has a life expectancy of over 150,000 uses
JONARD MS-6 Mid Span Slitter (1.2 mm-3.3 mm)
Designed to provide easy access to optical fibers in loose buffer tubes 1.2mm - 3.3 mm diameter. With 6 precision grooves buffer tube slitting is done without damage to the fiber. The blades are replaceable.
JONARD RST-8514 Riser Slitting Tool
Designed to shave a longitudinal access window in round FTTH riser cables and microducts for mid-span access. This riser slitting tool is perfect for making access windows on cables 8 to 14 mm (0.33” to 0.55”) in diameter without damaging the fiber inside.
JONARD CST-1140 Round Cable Strip & Ring Tool for Cables 4.5 - 29 mm in Diameter
The CST-1140 Round Cable Strip & Ring Tool is designed for fast and precise removal of cable jackets from round cables that are 3/16” to 1 1/8” (4.5 mm-29 mm) in diameter.
Features:
- Blade locks in several positions to make longitudinal cuts for end stripping, spiral cuts for end and mid span stripping, and circular cuts for jacket removal
- Black adjustment knob allows you to set the blade at precise depths to cut cable jackets perfectly every time
- Grey knob rotates blade for three different slitting options: ring, spiral, or longitudinal
- Can cut through a variety of jacket materials such as PVC, rubber, PE, and many more
- Spring-loaded cable holder allows tool to hold cable sizes from 3/16" to 1 1/8" (4.5 mm-29 mm) in diameter
- Ergonomic handles allow you to easily open the tool to insert cable
JONARD MS-306 - Mid Span Slit & Ring Tool (1.2 mm-3.3 mm) Mid-span slitter
The patented MS-306 Mid Span Slit and Ring Tool is designed to provide easy access to optical fibers in outer jackets and buffer tubes. Building on the popularity of the Jonard Tools MS-6 and MS-26 Fiber Optic Mid Span Slitting Tools, we have incorporated a ring feature in the tool to make it even more versatile.
JONARD RCS-25 Ratcheting Cable Slitter
Designed to dismantle heavy-duty cables, this ratcheting cable slitter is the perfect tool for slitting and ringing round cables greater than 25 mm in diameter.
JONARD RCS-30 Ratcheting Duct and Cable Slitter
Designed to create mid-span slits and window cuts in ducts and heavy-duty cables, this ratcheting cable slitter is the perfect tool for slitting and ringing cables or ducts greater than 25 mm in diameter.
JONARD RCS-50 Submariner Cable & Large Duct Slitter
Designed to open the toughest heavy-duty cable and duct jackets, the RCS-50 is perfect for performing lateral and longitudinal cuts on submariner cables, large fiber ducts, or large count telephone cables at least 1 1/2" (3.81 cm) in diameter.
Features:
- Includes a free rugged carrying case, the H-20!
- Fixed jaws and ratcheting feature make it easy to grip and slit heavy-duty cable jackets, including jackets made of HDPE (High Density Polyethylene)
- Works on cables or ducts at least 1 1/2" (3.81 cm) in diameter
- Easy adjustable blade depth adjusts from 1/8" - 3/8" (3.18 mm - 9.53 mm) to handle thick-jacketed cables and ducts
- Stainless steel construction with plated steel and aluminum hardware for maximum durability and corrosion resistance
- Perfect for removing thick cable jackets on large submariner power cables, large telecom cables (600 pair+), large fiber optic ducts, or other large power cables
