Cross Plate Anchor 1 1/4" x 24" J3524-1
J3524-1 24" with the 1-1/4 rod Cross Plate anchors are made for made for installation in holes augered by power drillers. One piece plate anchor formed of two structural members that are ribbed for reinforcement. A retainer on the bottom holds the nut from the forged eye rod. The Cross Plate Anchor is 24" wide and will fit a 1 1/4" double or triple eye rod Only.
Cross Plate Anchor 1" x 20" J3520-1
Cross Plate anchors are made for made for installation in holes augered by power drillers. One piece plate anchor formed of two structural members that are ribbed for reinforcement. A retainer on the bottom holds the nut from the forged eye rod. The Cross Plate Anchor is 20" wide and will fit a 1" double or triple eye rod Only.
Cross Plate Anchor 1" x 24" J3524
Cross Plate anchors are made for made for installation in holes augered by power drillers. One piece plate anchor formed of two structural members that are ribbed for reinforcement. A retainer on the bottom holds the nut from the forged eye rod. The Cross Plate Anchor is 24" wide and will fit a 1" double or triple eye rod Only.
Cross Plate Anchor 3/4 x 16" J3516
Cross Plate anchors are made for made for installation in holes augered by power drillers. One piece plate anchor formed of two structural members that are ribbed for reinforcement. A retainer on the bottom holds the nut from the forged eye rod. The Cross Plate Anchor is 16" wide and will fit a 3/4" double or triple eye rod Only.
Cross Plate Anchor 3/4" J3520
MSI H-J3520 Cross Plate Anchor
- Made for the installation in holes augered by power drillers
- One piece formed anchors with wings and a base
- Retainer on the bottom hold the nut from the forged eye rod
- Hole Size: 20"
- Area ( Sq. In.): 250
- Rod Size: 5/8" or 3/4"
EXPANDING ANCHOR TOOL HUB C3020003 10ft
The Chance fiberglass handle Expanding and Tamping Bar simplifies the job of expanding anchors. The curved Expander and Tamper Head distributes the weight of the bar evenly around the anchor rod to reduce handle vibration. The hook of the Expanding and Tamping Bar wraps around the anchor rod to keep the expanding head from slipping off the anchor top plate. This tool is also effectively used for tamping in soil above the installed anchor. The base casting is attached directly to the fiberglass handle.
This is 10 ft long and will ship LTL freight.
C3020003 Expanding & Tamping Bar 10'
