Condux 08078200 Foam Carrier, lightweight carrier easily blow through duct. Best suited for start runs and operates with with multiple bends.
Specifications:
Duct Size: 1/2" (13 mm)
Max. OD: 0.50" (13 mm)

Condux 08078300 Foam Carrier, lightweight carrier easily blows through duct. Best suited for shorrt runs and operates with multiple bends.
Specifications:

• Duct Size: 3/4" (19 mm)
• Max. OD: 0.75" (19 mm)

Condux 08032400 Foam Carrier, lightweight carrier easily blow through duct. Best suited for start runs and operates with with multiple bends.
Light Weight Type; 2 Inch Outer Diameter Size; 2 Inch Conduit Size

Condux 08761441 Foam Carrier, is specially designed for spreading lubricant in duct prior
to fiber optic cable blowing/jetting.
Specifications:

• Carrier Size: 1.75" (44.5 mm)
• Duct Range (Inside) Diameter: 1.50" SDR 13.5, 11 (38 - 45 mm)

Condux 08780223 Venturi Air Plug Seal Disk, blocks the the backward flow of air on the Condux Fiber-Optic Cable Blower while the user is conducting pressure tests and/or applying pre-lubricant in duct. The Seal disk is also used in conjunction with the Winch Line Blower when installing polyester pull tape.

Condux 08032500 Foam Carrier, lightweight carrier easily blow through duct. Best suited for start runs and operates with with multiple bends.
Specifications:
Duct Size: 3" (76 mm)
Max. OD: 3.00" (76 mm)

Condux 08032600 Foam Carrier, lightweight carrier easily blow through duct. Best suited for start runs and operates with with multiple bends.
Specifications:
Duct Size: 4" (102 mm)
Max. OD: 4.00" (102 mm)

Condux 08761439 Foam Carrier, this foam carrier is specially designed for spreading lubricant in duct prior to fiber optic cable blowing/jetting.
Specifications:

• Carrier Size: 1.25" (31.8 mm)
• Duct Range (Inside) Diameter: 1" SDR 13.5, 11 (25 - 22 mm)

Condux 08761440 Foam Carrier, is specially designed for spreading lubricant in duct prior to fiber-optic
cable blowing/jetting.
Specification:

• Carrier Size: 1.50" (38.1 mm)
• Duct Range (Inside) Diameter: 1.25" (30-39 mm) SDR 13.5", 11

CONDUX 08780126 O-Ring Seal Kit for Gulfstream™ 400

Condux 08761442 Foam Carrier, is specially designed for spreading lubricant in duct prior
to fiber-optic cable blowing/jetting.
Specifications:

• Carrier Size: 2.00" (50.8 mm)
• Duct Range (Inside) Diameter: 2.00" SDR 13.5, 11 (46 - 52 mm)

Condux 08761425 Cable Seals 0.43" - 0.48", replacement cable seals for Condux FIber-Optic Cable blowers are sold in
packs of four.These seals are compatible with the according cable venturi for the HD Blowers, Deluxe Lightweight Blower, and Mini Blower/Pusher.

Condux 08676863, Speed Ball Insert Innerduct Split Coupling 40mm

Used for temporary joining all types of innerduct during the cable blowing process.

*One Insert Set includes Rubber Seal*

Specification:

• Nominal Duct Size: 1.575" (40 mm)
• Duct Type: 40 mm
• Mean Duct OD: 1.575" (40 mm)

Condux 08761426 Cable Seals 0.49" - 0.55" , replacement cable seals  for Condux Fiber-Optic Cable Blowers are sold in packs of four. These cable seals are compatible with the according cable venturi for the HD Blowers, Deluxe Lightweight Blower, and Mini-Blower/Pusher.

Condux flexible shuttles are available in triple parachute configuration, making rope, pull tape and fiber optic cable installation in occupied duct a breeze.

Cable seal for Condux GS-400 (Gulfstream) Fiber Optic Cable Blower.
Cable OD: 0.29"-0.34" (7.3-8.8)

Condux flexible shuttles are available in triple parachute configuration, making rope, pull tape and fiber optic cable installation in occupied duct a breeze.

Cable seal for Condux GS-400 (Gulfstream) Fiber Optic Cable Blower.
Cable OD: 0.23"-0.28" (7.3-8.8)

Condux 08676859, Speed Ball Insert Innerduct Split Coupling 1.00",

Used for temporary joining all types of innerduct during the cable blowing process.

*One Insert Set includes Rubber Seal*

Specifications:

• Nominal Size: 1.00" (25 mm)
• Duct Type: 1" SDR 11 & 13.5
• Mean Duct OD: 1.315" (33 mm)

Condux 08676860, Speed Ball Insert Innerduct Split Coupling 1.25"

Used for temporary joining all types of innerduct during the cable blowing process.

*One Insert Set includes Rubber Seal*

Specifications:

• Nominal Duct Size: 1.25" (32 mm)
• Duct Type: 1 1/4" SDR 11, 13.5
• Mean Duct OD: 1.660" (42 mm)

Box includes:

• Push-On Retainers
• Disc Carriers
• Loctite
• Calipers

Condux 02290222, Black Molded Case with foam insert for Fiber Optic Cable Blower and/or Insertion gun.

Condux 08676861, Speed Ball Insert Innerduct Split Coupling 1.50"

Used for temporary joining all types of innerduct during the cable blowing process.

*One Insert Set includes Rubber Seal*

Specification:

• Nominal Duct Size: 1.50" (38 mm)
• Duct Type: 1-1/2" SDR 11, 13.5
• Mean Duct OD: 19.00" (48 mm)

Condux 08676862, Speed Ball Insert Innerduct Split Coupling 2.00"

Used for temporary joining all types of innerduct during the cable blowing process.

*One Insert Set includes Rubber Seal*

Specifications:

• Nominal Duct Size: 2.00" (61 mm)
• Duct Type: 2.00" SDR 11, 13.5
• Mean Duct OD: 2.375" (60 mm)

These cases are made for the innerduct, single and double low pressure seal-offs. (Holds 4 Seal Offs)

Condux 08764143 Seal, Inner-Duct
Duct OD: 0.39" (10mm)

Clamp, Inner-Duct
Duct OD: 0.39" (10mm)

CONDUX 08764150 Microduct Packs for the Gulfstream™ 400 & the Mini-Blower/Pusher

Duct Size OD (mm):12.7mm

CONDUX 08764140 Microduct Packs for the Gulfstream™ 400 & the Mini-Blower/Pusher

Duct Size OD (mm):10mm
Innerduct Eye ID Range:5-9mm

Includes

CONDUX 08764110 Microduct Packs for the Gulfstream™ 400 & the Mini-Blower/Pusher

CONDUX 08764130 Microduct Packs for the Gulfstream™ 400 & the Mini-Blower/Pusher

Each duct pack comes with:

• Duct Clamp - Part No. 08780682
• Duct Seal - Part No. 08780685
• Carrier - Part No. 08780690
• Foam Carrier - Part No. 08078300
• Cable Grip - Part No. 08643137
• Innerduct Eye - Part No. 08761840

Each duct pack comes with:

• Duct Clamp - Part No. 08780375
• Duct Seal - Part No. 08780051
• Carrier - Part No. 08761255
• Foam Carrier - Part No. 08761440
• Cable Grip - Part No. 08643149
• Innerduct Eye - Part No. 08761842

Each duct pack comes with:

• Duct Clamp - Part No. 08780930
• Duct Seal - Part No. 08780930
• Carrier - Part No. 08761265
• Foam Carrier - Part No. 08761442
• Cable Grip - Part No. 08643155
• Innerduct Eye - Part No. 08761846

Each duct pack comes with:

• Duct Clamp - Part No. 08780930
• Duct Seal - Part No. ???
• Carrier - Part No. 08761265
• Foam Carrier - Part No. 08761442
• Cable Grip - Part No. 08643155
• Innerduct Eye - Part No. 08761846

Each duct pack comes with:

• Duct Clamp - Part No. 08780404
• Duct Seal - Part No. 08780398
• Carrier - Part No. 08761260
• Foam Carrier - Part No. 08761441
• Cable Grip - Part No. 08643149
• Innerduct Eye - Part No. 08761844

The fiber optic cable EZ-Exit tool eliminates damage to your fiber by easily guiding fiber optic cable past the sharp edges of a manhole chimney. The easy clamping feature allows the tool to be quickly installed in less than 30 seconds, reducing the total setup time of a fiber pull. Provides a rigid, low friction shoe that guides fiber over the sharp edges at the top and bottom of a manhole chimney while maintaining a bend diameter of 45” to accommodate up to some of the largest fiber cables.

Each duct pack comes with:

• Duct Clamp - Part No. 08780930
• Duct Seal - Part No. ???
• Carrier - Part No. 08761265
• Foam Carrier - Part No. 08761442
• Cable Grip - Part No. 08643155
• Innerduct Eye - Part No. 08761846