Condux 08038400 Tapered Head 3/8-16 thread
Attaches to the end fitting on the duct rod. Guides duct rod through the conduit and allows a pull line (diameter A) to be attached to the duct rod. Comes standard with each of the duct rodders. 3/8-16 thread fits 5/16 & 7/16 rods
Condux 08780223 Venturi Air Plug Seal Disk
Condux 08780223 Venturi Air Plug Seal Disk, blocks the the backward flow of air on the Condux Fiber-Optic Cable Blower while the user is conducting pressure tests and/or applying pre-lubricant in duct. The Seal disk is also used in conjunction with the Winch Line Blower when installing polyester pull tape.
Condux 08036303K Kit,Fitting End 3/8-M 7/16 Coated Rod
Use as a replacement to the factory installed end fittings if the end fitting breaks off or if the duct rod breaks close to the end of the rod. Installation instructions are included with the end fittings. Epoxy is required for installation and is ordered separately.
Condux 08035751 Splice Kit 7/16"
Condux 08035751 Splice Kit for 7/16" Duct Rodder
- Used to repair a 7/16" Duct Rodder if it breaks.
- Includes the following; Splice Tube, Epoxy, Installation Instruction
Condux 08035752 Splice Kit 9/16"
Condux 08035752 Splice Kit for 9/16" Duct Rodder
- Used to repair the Duct Rod if it breaks.
- Includes the following; Splice Tube, Epoxy, Installation Instruction
Condux 08035772 Replacement Repair Kit for 1/4" Duct Rodder
Condux 08035772, Replacement Repair Kit for 1/4" Duct Rodder includes Replacement Threaded Ending Fittings, 3 packs of Epoxy with applicator sticks, and sandpaper that all come standard in a Nylon Pouch that attaches to the Rodders' Cage for convenient access.
Condux 08037401 Roller Guide Assembly 7/16"
Condux 08037401 Roller Guide
The Roller Guide helps guide the duct rod around bends, sweeps, and duct misalignments. Also used when the conduit is already
occupied by other cables.
Specifications:
- US Duct Rod Diameter: 7/16"
- USC Thread: 3/8" - 16"
- Duct Range ID: 2.5-6"
Condux 08035774 Replacement Repair Kit for 5/16" Duct Rodder
Condux 08035774, Replacement Repair Kit for 5/16" Duct Rodder includes Replacement Threaded Ending Fittings, 3 packs of Epoxy with applicator sticks, and sandpaper that all come standard in a Nylon Pouch that attaches to the Rodders' Cage for convenient access.
Condux 08035776 Replacement Repair Kit for 7/16" Duct Rodder
Condux 08035776, Replacement Repair Kit for 7/16" Duct Rodder includes Replacement Threaded Ending Fittings, 3 packs of Epoxy with applicator sticks, and sandpaper that all come standard in a Nylon Pouch that attaches to the Rodders' Cage for convenient access.
Condux 08037538 Flexible Leader 3/8" 24" Long
Condux 08037538 Flexible Leader for 3/8" rod, helps guide the duct rod around bends, sweeps, and duct misalignment.
Specifications:
Rod Diameter: 3/8"
USC Thread: 3/8-16 Thread 24" Long
Condux 08037400 Roller Guide Assembly 9/16"
Condux 08037400 Roller Guide
The Roller Guide helps guide the duct rod around bends, sweeps, and duct misalignments. Also used when the conduit is already
occupied by other cables.
Specifications:
- US Duct Rod Diameter: 9/16"
- USC Thread: 3/4" - 10"
- Duct Range ID: 3-8"
Condux 08035778 Replacement Repair Kit for 9/16" Duct Rodder
Condux 08035778, Replacement Repair Kit for 9/16" Duct Rodder includes Replacement Threaded Ending Fittings, 3 packs of Epoxy with applicator sticks, and sandpaper that all come standard in a Nylon Pouch that attaches to the Rodders' Cage for convenient access.
Condux 08037460 - 5/16" Roller Guide Assembly
Condux 08037460 Roller Guide Assembly, helps guide the duct rod around bends, sweeps, and it is already
occupied by other cables. For 5/16" Duct Rodder.
Specifications:
- US Duct Rodder Diameter: 5/16"
- USC Thread: 3/8-16
- Duct ID Range: 1.50 - 6.00"
Condux 08037534 Flexible Leader 9/16" 24" Long
Condux 08037534 Flexible Leader for 9/16" rod, helps guide the duct rod around bends, sweeps, and duct misalignment.
Specifications:
Rod Diameter: 9/16"
USC Thread: 3/4-10 Thread 24" Long
