Banding 1-1/4" x 100' Aluma-Form SSB-100 MADE IN USA (Currently Unavailable)
Aluma-Form band used to wrap around poles to hold attachments 10ft length. 1 1/4" wide 100ft length. Without drilling holes, Bolt-A-Band features a pre-cut, high quality stainless steel band with accompanying installation hardware. Adjust easily to fit most any size pole. Installs in just minutes with no special tools required.
Two buckles required for all band brackets and attachments.
Banding 3/4" x 100' x .30 Aluma-Form 201-SSB-100 MADE IN USA
Aluma-Form band used to wrap around poles to hold attachments 100ft length. 3/4" wide x .30 x 100ft length. Without drilling holes, Bolt-A-Band features a pre-cut, high quality stainless steel band with accompanying installation hardware. Adjust easily to fit most any size pole. Installs in just minutes with no special tools required.
Two buckles required for all band brackets and attachments.
Buckle 1-1/4" Alum-A-Form BAB-58
Bolt Clamp Used to hold together banding around pole with hardware attached without drilling holes. Adjust easily to fit most any size pole. Installs in just minutes with no special tools required. Two buckles required for all banded brackets and attachments
Buckle For 3/4" Banding Aluma-Form BAB-38
Bolt Clamp Used to hold together banding around pole with hardware attached without drilling holes. Adjust easily to fit most any size pole. Installs in just minutes with no special tools required.
Two buckles required for all band brackets and attachments.
Cable Positioners Assemblies/Single Phase Mounts Aluma-Form CS820
Model CS-820 universally accept outside cable diameters from
3/4” to 3” (19mm to 76mm)
Easily installed units that consist of an aluminum saddle, a polyethylene foam double coated bonding tape with pressure sensitive synthetic polymer (rubber based) adhesive, and a helically cut polyethylene cable tie.
Double Banded Standoff Bracket ALU-6B-ASO-8
ALU 6B-ASO-8 Double Banded Standoff Bracket,-WayTslot Band 6"riser8"wide Double Banded Only no thru-bolt No holes for thru-bolt or lags. Used in Heavy duty pole applications.
Banding and Two buckles required for all band brackets and attachments. These items must be purchased separately.
Standoff Bracket Aluma-form 4-CSO-7-STK-2-4WT
Multi-purpose bracket for mounting 1” thru 3” conduit in a variety of ways.
- Rises 4" off the pole with a 7" wide 4-way T-slot channel
- Comes with one 2" pipe strap and the 1/2" hardware for the T-slot channel
- optional 1", 1.5", 2.5" or 3" straps are not included
- 4 way T-Slot extrusion eliminates field drilling
- V-bracket Mounts to the wooden pole on 8 1/2” hole centers with 7/16” or 1/2” lag screws (not supplied)
Standoff Bracket Aluma-form 4-CSO-7-STK-2-4WT
Standoff Bracket Aluma-Form 4-CSO-8-STK-4-4WT
Multi-purpose bracket for mounting 1” thru 4” conduit in a variety of ways.
- Rises 4" off the pole with a 8" wide 4-way T-slot channel Comes with 4" strap
- Comes with one 4" pipe strap and the 1/2" hardware for the T-slot channel
- optional 1", 1.5", 2.5", 3" or straps are not included
- 4 way T-Slot extrusion eliminates field drilling
- V-bracket Mounts to the wooden pole on 8 1/2" hole centers with 7/16” or 1/2” lag screws (not supplied)
Standoff Bracket Aluma-form 4-CSO-8-STK-4-4WT
Standoff Bracket Aluma-Form 6B-CSO-12 2-Way
Aluma-Form 6" Riser x12" wide 6B-CSO-12 Band-able Standoff Bracket with an 12" wide 2-WAY T-SLOT CHANNELL . A multi-purpose bracket for mounting 1” through 6” conduit in a variety of ways. This bracket has a wide range of adjustability. T-slot extrusion eliminates field drilling. Mounts to the pole on 3-5/8” hole centers with 5/8” through bolt and 1/2” lag screw, Can also be banded. Pipe Straps & Banded Buckle sold separately.
One Band and buckle required for all 6B-CSO standoff banded brackets.
Standoff Bracket Aluma-Form 6B-CSO-12-4WT
Aluma-Form 6" Riser x 12" wide 6B-CSO-12-4WT Band-able Standoff Bracket with an 6" wide 4-WAY T-SLOT CHANNELL . A multi-purpose bracket for mounting 1” through 4” conduit in a variety of ways. This bracket has a wide range of adjustability. T-slot extrusion eliminates field drilling. Mounts to the pole on 3-5/8” hole centers with 5/8” through bolt and 1/2” lag screw, Can also be banded. Pipe Straps & Banded Buckle sold separately. One Band and buckle required for all 6B-CSO standoff banded brackets.
Standoff Bracket Aluma-Form 6B-CSO-18-4WT
Aluma-Form 6" Riser x 18" wide 6B-CSO-18-4WT Band-able Standoff Bracket with
an 18" wide 4-WAY T-SLOT CHANNELL . A multi-purpose bracket for mounting
1” through 4” conduit in a variety of ways. This bracket has a wide
range of adjustability. T-slot extrusion eliminates field drilling.
Mounts to the pole on 3-5/8” hole centers with 5/8” through bolt and
1/2” lag screw, Can also be banded. Pipe Straps & Banded Buckle sold separately.
One Band and buckle required for all 6B-CSO standoff banded brackets.
Standoff Bracket Aluma-Form 6B-CSO-24-4WT
Aluma-Form 6" Riser x 24" wide 6B-CSO-24-4WT Band-able Standoff Bracket with
an 6" wide 4-WAY T-SLOT CHANNELL . A multi-purpose bracket for mounting
1” through 4” conduit in a variety of ways. This bracket has a wide
range of adjustability. T-slot extrusion eliminates field drilling.
Mounts to the pole on 3-5/8” hole centers with 5/8” through bolt and
1/2” lag screw, Can also be banded. Pipe Straps & Banded Buckle sold separately. One band and buckle required for all 6B-CSO standoff banded brackets.
Standoff Bracket Aluma-Form 6B-CSO-36-4WT
Aluma-Form 6" Riser x 36" wide 6B-CSO-36-4WT Band-able Standoff Bracket with
an 6" wide 4-WAY T-SLOT CHANNELL . A multi-purpose bracket for mounting
1” through 4” conduit in a variety of ways. This bracket has a wide
range of adjustability. T-slot extrusion eliminates field drilling.
Mounts to the pole on 3-5/8” hole centers with 5/8” through bolt and
1/2” lag screw, Can also be banded. Pipe Straps & Banded Buckle sold separately. One band and buckle required for all 6B-CSO standoff banded brackets.
Standoff Bracket Aluma-Form 6B-CSO-6 2-Way
Aluma-Form 6" Riser x 6" wide 6B-CSO-6 Band-able Standoff Bracket with
an 6" wide 2-WAY T-SLOT CHANNELL . A multi-purpose bracket for mounting
1” through 2.5” conduit in a variety of ways. This bracket has a wide
range of adjustability. T-slot extrusion eliminates field drilling.
Mounts to the pole on 3-5/8” hole centers with 5/8” through bolt and
1/2” lag screw, Can also be banded. Pipe straps & Banded Buckle sold separately. One Band and buckle required for all 6B-CSO Standoff banded brackets.
Not wide enough for a 3" or 4" Pipe Strap
Standoff Bracket Aluma-Form 6B-CSO-6-4WT
Aluma-Form 6" Riser x 6" wide 6B-CSO-6-4WT Band-able Standoff Bracket with
an 6" wide 4-WAY T-SLOT CHANNELL . A multi-purpose bracket for mounting
1” through 2.5” conduit in a variety of ways. This bracket has a wide
range of adjustability. T-slot extrusion eliminates field drilling.
Mounts to the pole on 3-5/8” hole centers with 5/8” through bolt and
1/2” lag screw, Can also be banded. Pipe straps & Banded Buckle sold separately. One Band and buckle required for all 6B-CSO standoff banded brackets. Not wide enough for a 3" or 4" Pipe Strap
Standoff Bracket Aluma-Form 6B-CSO-8 2-Way
Aluma-Form 6" Riser x 8" wide 6B-CSO-8 Band-able Standoff Bracket with an 8" wide 2-WAY T-SLOT CHANNELL . A multi-purpose bracket for mounting 1” through 4” conduit in a variety of ways. This bracket has a wide range of adjustability. T-slot extrusion eliminates field drilling. Mounts to the pole on 3-5/8” hole centers with 5/8” through bolt and 1/2” lag screw, Can also be banded. Pipe straps & Banded Buckle sold separately. One Band and buckle required for all 6B-CSO standoff banded brackets.
Standoff Bracket Aluma-Form 6B-CSO-8-4WT
Aluma-Form 6" Riser x 8" wide 6B-CSO-8-4WT Band-able Standoff Bracket with
an 8" wide 4-WAY T-SLOT CHANNELL . A multi-purpose bracket for mounting
1” through 4” conduit in a variety of ways. This bracket has a wide
range of adjustability. T-slot extrusion eliminates field drilling.
Mounts to the pole on 3-5/8” hole centers with 5/8” through bolt and
1/2” lag screw, Can also be banded. Pipes straps & Banded Buckle sold separately. One Band and buckle required for all 6B-CSO standoff banded brackets.
STANDOFF CONDUIT STRAP 1" FOR ALU STK-1
1" CONDUIT STRAP FOR STANDOFF ALU STK-1 INCLUDES 1/2" BOLTS AND NUTS.
Strap kits are available for use with the CSO system with the following variations. The straps have two holes and strap kit consists of straps, bolts, nuts, and washers for mounting one conduit section. These units can also be used with Bolt-A-Band systems to attach to steel or concrete poles.
STANDOFF CONDUIT STRAP 2" FOR ALU STK-2
2" CONDUIT STRAP FOR STANDOFF ALU STK-2 INCLUDES 1/2" BOLTS AND NUTS.
Strap kits are available for use with the CSO system with the following variations. The straps have two holes and strap kit consists of straps, bolts, nuts, and washers for mounting one conduit section. These units can also be used with Bolt-A-Band systems to attach to steel or concrete poles.
STANDOFF CONDUIT STRAP 3" FOR ALU STK-3
3" CONDUIT STRAP FOR STANDOFF ALU STK-3 INCLUDES1/2" BOLTS AND NUTS.
Strap kits are available for use with the CSO system with the following variations. The straps have two holes and strap kit consists of straps, bolts, nuts, and washers for mounting one conduit section. These units can also be used with Bolt-A-Band systems to attach to steel or concrete poles.
STANDOFF CONDUIT STRAP 4" FOR ALU STK-4
4" CONDUIT STRAP FOR STANDOFF ALU STK-4 INCLUDES1/2" BOLTS AND NUTS.
Strap kits are available for use with the CSO system with the following variations. The straps have two holes and strap kit consists of straps, bolts, nuts, and washers for mounting one conduit section. These units can also be used with Bolt-A-Band systems to attach to steel or concrete poles .
STANDOFF CONDUIT STRAP 8" FOR STANDOFF ALU STK-8
8" CONDUIT STRAP FOR STANDOFF ALU STK-8 INCLUDES 1/2" BOLTS AND NUTS.
Strap kits are available for use with the CSO system with the following variations. The straps have two holes and strap kit consists of straps, bolts, nuts, and washers for mounting one conduit section. These units can also be used with Bolt-A-Band systems to attach to steel or concrete poles.
Strap, Conduit Kit 2.5" Hubbell CSTK 2.5
Conduit bracket strap used to secure conduit to pole. Comes with 1/2" X 1 1/4 hex head bolts.
Aluminum Conduit Bracket Strap, used with T-Slot shapes to secure conduit to pole. Supplied with two 1/2" x 1 1/4" hex head bolts, lockwashers and hex nuts.
