A screw type grip used to temporarily fasten lashing wire under tension before placing a permanent clamp like or D or E lashing wire clamp. Grip works with any size lashing wire.

Designed for 7/16" F Connectors, this full-size open head torque wrench provides a perfectly calibrated amount of torque to prevent damage from over-tightening or signal loss from under-tightening.

Designed for use on 1/2” connectors, nuts, and bolts, this patented angled speed wrench makes tightening and loosening quick and easy.

This speed wrench features the following:

• Patented 15° angled speed head allows easy access to connectors, nuts, and bolts
• Double-ended design allows one end of the wrench to tighten while the other can loosen
• Made of chrome plated vanadium steel for maximum strength and durability
• Belt loop hole for convenient storage and transportation

Designed for use on 7/16” F connectors, nuts, and bolts, this patented angled speed wrench makes tightening and loosening quick and easy.

Designed for use on 1/2” connectors, nuts, and bolts, this patented ratcheting speed wrench makes tightening and loosening quick and easy.

Designed for use on 7/16” F connectors, nuts, and bolts, this patented ratcheting speed wrench makes tightening and loosening quick and easy.

Jonard's adjustable wrenches are made of chrome vanadium steel with a chrome plated finish. They are forged and heat treated for maximum strength.

Jonard's adjustable wrenches are made of chrome vanadium steel with a chrome plated finish. They are forged and heat treated for maximum strength.

Jonard's adjustable wrenches are made of chrome vanadium steel with a chrome plated finish. They are forged and heat treated for maximum strength.

Designed for use on communication and pedestal boxes, this booth wrench is perfect for opening 5/32” hex tamper-proof fasteners. This booth wrench features the following:

• Heat treated carbon steel for maximum durability
• Extra long 6” shaft and 9” overall length for greater reach

Designed for use on communication and pedestal boxes, this booth wrench is perfect for opening 5/32” hex tamper-proof fasteners. This booth wrench features the following:

• Heat treated carbon steel for maximum durability
• 6” overall length for easy portability and storage

Designed for use on 7/16” F connectors, nuts, and bolts, this combination wrench makes tightening and loosening quick and easy. This combination wrench features the following:

• Ratcheting box-end has a 15° angled head to keep hands away from work
• Ratcheting box-end also offers 12 points of contact to provide maximum torque
• Wrench-end has a 15° offset to allow easy access to connectors, nuts, and bolts
• Made of chrome plated chrome vanadium steel for maximum strength and durability

JONARD M-216C/EX - CAN WRENCH, ERGONOMIC HEX

Can Wrench Ergonomic 7/8" Diameter Handle, Hex Outer Socket. Double end can socket wrench, 3/8" and 7/16" hex, orange Impact resistant thermoplastic ergonomic handle. Used in placing fuses in cable terminals and connecting wires to fuses and binding posts.

Designed to fit over long binding posts, this can wrench is the perfect tool for opening telephone box fasteners and tightening nuts on binding-post terminals.

JONARD M-216CS22 - CAN WRENCH, ERGONOMIC W/ WIRE STRIPPER

Can Wrench Ergonomic 7/8" Diameter Handle, Hex Outer Socket (1 1/2" deep) with 22 AWG Stripper Blade. Open telephone box fasteners and tighten nuts on binding posts. Designed for universal access to telephone boxes and pedestals.

Torque Wrench, Full Head 7/16", 20 in/lb JONARD TWAF-71620

Torque Wrench Full Head is a full size open end wrench that behaves like a traditional open end wrench. Designed for "F" Connectors, these wrenches help prevent over tightening. An audible click tells you the connection has been properly achieved.

Designed for 7/16" F Connectors, this full-size open head torque wrench provides a perfectly calibrated amount of torque to prevent damage from over-tightening or signal loss from under-tightening.

Designed to reach shielded F connector fittings with a preset torque of 30 in-lb, this right angle swivel torque wrench provides a perfectly calibrated amount of torque to prevent damage from over-tightening or signal loss from under-tightening.

Designed for 7/16" F connectors, this speed head torque wrench skips over the corners of nuts and bolts so no repositioning of the tool is required.

For 5/8" hardware Large end has 29/32" and 1-3/32" openings. Small end has 5/8" and 7/8" opening. Forged from....

For 3/4" hardware Large end has 1-1/16" and 1-5/16" openings. Small end has 5/8" and 3/16" openings. Forged from....

Similar to standard lineman's wrench, but with the openings sized to NEMA hardware specifications....

US Heavy 3/4'' Erection Wrench with Hole KLEIN-3212TT
Cross-hole with no sharp edges for tethering. Forged from select alloy steel to withstand high-leverage and heavy loads. Continuous taper of handle makes lining-up bolt holes easy and works on a range of bolt and/or hole sizes without binding.

US Heavy 7/8'' Erection Wrench with Hole US Heavy 7/8'' Erection Wrench with Hole KLEIN-3213TT.
Cross-hole with no sharp edges for tethering. Forged from select alloy steel to withstand high-leverage and heavy loads. Continuous taper of handle makes lining-up bolt holes easy and works on a range of bolt and/or hole sizes without binding

US Heavy 1'' Erection Wrench with Hole KLEIN-3214TT.
Cross-hole with no sharp edges for tethering. Forged from select alloy steel to withstand high-leverage and heavy loads. Continuous taper of handle makes lining-up bolt holes easy and works on a range of bolt and/or hole sizes without binding.

Extra capacity allows use of a smaller size wrench to handle....

Extra capacity allows use of a smaller size wrench to handle....

Knockout Punch Set with Wrench Klein 53732SEN

Automatically limits desired torque. Torque by feel. Pull and clickit's torqued to micrometer accuracy...

Wrench Socket Set 20 Piece 3/8-Inch Drive Socket Wrench Set Klein 65508

Two tools in one; saves space in your pouch. One end opens telephone box fasteners, the other....

Both ends are offset 25° for more convenient use in confined spaces and on long studs. Different size...

Set of the ratcheting box wrenches in heavy plastic roll-up pouch. Both ends are...

Extra capacity allows use of a smaller size wrench to handle bigger jobs, especially in confined spaces. Forged heat-treated alloy steel for maximum strength and light weight.

Extra capacity allows use of a smaller size wrench to handle bigger jobs, especially in confined spaces. Forged heat-treated alloy steel for maximum strength and light weight.

Bolt-through design allows bolts to pass through the socket. 3/4'' and 1'' x 1-1/8'' combination square....

• Ratcheting wrench features six sizes in one tool (6-in-1)
• 3/4-Inch, 13/16-Inch, 1-Inch and 1-1/8-Inch combination square sizes
• 9/16-Inch and 3/4-Inch hex sizes
• Works on most common utility pole hardware, such as lag bolts, ''C'' clamps and suspension bolts
• Ratcheting Wrench's bolt-through design allows bolts to pass through the socket
• Fully integrated handle for durability and non-slip grip for comfort
• Bright yellow socket for easy visibility

The Klein Tools Lineman's Insulating 4-in-1 Box Wrench is the only double ended 4-in-1 wrench on the market to meet the ASTM standard 1000V rating. It features a transparent handle that shows the metal ends of the wrench are not touching. The solid, durable wrench features four 12 point socket sizes: 1/2'', 9/16'', 5/8'', and 3/4''.

Versatile wrench fits nuts and bolts up to 1-5/16'' (33 mm). Convenient and handy size (11 total length) with a continuous-taper handle (8) for alignment of bolt and rivet holes.

Versatile wrench fits all nuts and bolts to 1-1/2'' (38 mm). Eliminates the need for carrying several fixed-size wrenches.

Dual End Lineman Wrench 12" Lowell 103TDE
Triple Dual End Ratcheting Lineman Wrench.
Lineman's Wrenches for high line utility pole installation and repair.

Lineman's 4in1 Ratcheting Insulated Box Wrench is 1000V UL Classified. High contrast size markings let you identify size easier. The box wrench features twelve point sockets that fit 1/2", 9/16", 5/8" and 3/4" hardware.

Lineman's High-Leverage Ratcheting Wrench features the most durable ratchet. The ratcheting wrench has a built-in strike face available in both milled and smooth, providing you with a dedicated surface for hammering. These wrenches are constructed from durable forged steel for longer tool life. The high leverage wrench fits 3/4", 1", and 1-1/8" square hardware.

MILWAUKEE® Lineman's 5-in-1 Ratcheting Wrench features the most durable ratchet. The ratcheting wrench has built-in strike face offered in both milled and smooth, providing you with a dedicated surface for hammering. These wrenches have large directional switches that you can easily press while wearing gloves. The durable forged steel construction provides you with longer tool life. The wrench fits 3/4", 1", and 1-1/8" square sockets and 9/16" and 3/4" standard sockets.