 |
 |
 |
|
For Housing Only – Order #4800000
The Preformed Line Products FIBERLIGN Lite Support (FLS) system is designed to gently but firmly support All Dielectric Self-Supporting (ADSS) cable. It is intended for tangent support installations (see "LINE ANGLES") on lines that feature low voltages, very short spans and low mechanical loads. For products with higher capabilities see the subsequent pages under FIBERLIGN® Dielectric Support, FIBERLIGN Aluminum Support, FIBERLIGN Aluminum Suspension, with and without rods and FIBERLIGN Dielectric Suspension. The two latter products can be used in higher voltage environments where track resistant ADSS cables are required.
H-PLP00070178 .52" - .549", H-PLP00070179 .55" - .579", H-PLP00070250 .4" - .429", H-PLP00070255 .25" - .28", H-PLP00070256 .305" - .375"
00070178, 00070179, 00070250, 00070255, 00070256
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Adapts to all Fiber Drop Designs
- Rounds & Flat ADSS Profile
- Figure 8
- Span Lengths up to 300' (91 m)
- NESC Heavy
- Backbone and Drop Applications
- Line Angles up to 20 Degrees
- Multi-cable Options
- Two Cable per Housing
- Stackable Housing for 4 or more cables
- Stringing Block
- String-In Cable for line angles up to 10 Degrees
- Accepts 1-1/4" (31.8mm) diameter Pull-in Hardware
- Mounting Options
- Accepts 5/8" (15.8mm) Through Bolt for Wood Pole
- Accepts 3/4" (19.1mm) Wide Band for Steel/Concrete Pole
- Small Insert or Large Insert
- Standard Offering 1 Insert Per Assembly
- Soft Urethane Material
- Housing
- Two Housing Halves
- Hard Urethane Material
- Optional Hardware for Banding
- Retaining Bolt, Washer & Lock Washer
|
|
|
|
|
|
|
