Irwin 585-3043008 Auger Drill Bit with WeldTec (Q/R) Quick Release Shank 11/16", 7/16"

• Diameter: 11/16"
• Over Length: 17"
• Shank Size: 7/16" Quick Change Impact Shank
  
• WeldTec ship auger bits are made stronger and last longer because a harder cutting edge is welded to the base materials
• 2x Nail Cutting life compared to standard Irwin ship auger
• Patent pending welded cutting edge
• Wide Flukes
• 7/16" Quick Change Impact
• Fully Forged body on bits 3/4" diameter and larger

WeldTec Ship Auger bits are MADE STRONGER and LAST LONGER because a harder cutting edge is welded to the base material. 2X Nail Cutting Life compared to standard IRWIN ship augers Patent Pending Welded Cutting Edge Wide Flutes.

• Diameter: 13/16"
• Overall Length: 17"
• Shank Size: 7/16" Quick Change Impact Shank

Irwin 585-1826637 Pole Auger Drill Bit with WeldTec

• Diameter: 13/16"
• Flute Length: 21"
• Overall Length: 24"
• Shank Size: 7/16"
• Welded high speed steel cutting edge is sharper and larger than standard pole augers, so it cuts faster and lasts longer in dense, treated, or soaked wood.
• Feed screw is 50% larger and has a 10% faster pitch than standard pole augers, and is designed specifically for drilling deep holes in dense wood.
• Flutes are nearly two times wider than standard pole augers for maximum chip removal in deep holes.Clean cutting spur is located opposite the cutting edge. It scribes the hole before cutting for cleaner, faster drilling and more efficient transfer of chips to the flute, enhancing overall drilling speed.

Solid center design provides extra rigidity while boring Wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter, producing a faster, cleaner cut

• Diameter: 9/16"
• Shank Size: 5/16"
• All bits have a 4-1/2" twist length and a 7-1/2" overall length

Single-flute cutting edge for greater control through steps Hex shank prevents slipping in drill chuck Also available with (TiN) coating for longer life. New SpeedPoint tip penetrates faster than previous Unibits and prevents walking Ideal for drilling holes into thin materials such as stainless steel, copper, brass, aluminum, plastic and laminates.

• Hole Sizes: 1/8" - 1/2"
• Number of Holes: 13 Steps
• Maximum Material Thickness: 1/8"

Single cutter and side lip effortlessly bores holes in wood where nails may be encountered. Cuts through nails without damaging the bit. Full-length heat treatment guards against bending in heavy-duty applications and strengthens the twist where the greatest strain occurs. Hex shank design for use in impact wrench drills Wide lands help keep bit straight as it bores Bit can be resharpened

• Diameter: 9/16"
• Twist Length: 9"
• Overall Length: 12"
• Shank Size: 7/16"

Single spur, cutter, and side lip design bore through creosoted poles without clogging, binding, or stopping to clear chips. Extra-long twist is ideal for boring large poles, construction timbers, and for multiple timber applications. All bits feature 7/16" adaptable hex shank; simply remove it to use round shank. Full-length heat treatment guards against bending in heavy-duty applications and strengthens the twist where the greatest strain occurs. Bit can be resharpened Medium-fast screw point ideal for general woodboring applications.

• Diameter: 13/16"
• Flute Length: 18"
• Overall Length: 23"
• Shank Size: 7/16"

Single spur, cutter, and side lip bore through creosoted poles without clogging, binding, or stopping to clear chips. Extra-long twist is ideal for boring large poles, construction timbers, and for multiple timber applications. Hex shank design for use in impact wrench drills. Full-length heat treated bit guards against bending in heavy-duty applications and strengthens the twist where the greatest strain occurs. Bit can be resharpened Medium-fast screw point ideal for general woodboring applications.

• Diameter: 11/16"
• Flute Length: 15"
• Overall Length: 18"
• Shank Size: 5/8"

Single spur, cutter, and side lip bore through creosoted poles without clogging, binding, or stopping to clear chips. Extra-long twist is ideal for boring large poles, construction timbers, and for multiple timber applications. Hex shank design for use in impact wrench drills. Full-length heat treated bit guards against bending in heavy-duty applications and strengthens the twist where the greatest strain occurs. Bit can be resharpened Medium-fast screw point ideal for general woodboring applications.

• Diameter: 13/16"
• Flute Length: 21"
• Overall Length: 24"
• Shank Size: 5/8"

Single spur, cutter, and side lip bore through creosoted poles without clogging, binding, or stopping to clear chips. Extra-long twist is ideal for boring large poles, construction timbers, and for multiple timber applications. Hex shank design for use in impact wrench drills. Full-length heat treated bit guards against bending in heavy-duty applications and strengthens the twist where the greatest strain occurs. Bit can be resharpened Medium-fast screw point ideal for general woodboring applications.

• Diameter: 13/16"
• Flute Length: 15"
• Overall Length: 18"
• Shank Size: 5/8"

Single spur, cutter, and side lip design bore through creosoted poles without clogging, binding, or stopping to clear chips. Extra-long twist is ideal for boring large poles, construction timbers, and for multiple timber applications. All bits feature 7/16" adaptable hex shank; simply remove it to use round shank. Full-length heat treatment guards against bending in heavy-duty applications and strengthens the twist where the greatest strain occurs. Bit can be resharpened Medium-fast screw point ideal for general woodboring applications.

• Diameter: 9/16"
• Flute Length: 24"
• Overall Length: 29"
• Shank Size: 7/16"

Single spur, cutter, and side lip bore through creosoted poles without clogging, binding, or stopping to clear chips. Extra-long twist is ideal for boring large poles, construction timbers, and for multiple timber applications. Hex shank design for use in impact wrench drills. Full-length heat treated bit guards against bending in heavy-duty applications and strengthens the twist where the greatest strain occurs. Bit can be resharpened Medium-fast screw point ideal for general woodboring applications.

• Diameter: 13/16"
• Flute Length: 21"
• Overall Length: 24"
• Shank Size: 7/16"

Single spur, cutter, and side lip bore through creosoted poles without clogging, binding, or stopping to clear chips. Extra-long twist is ideal for boring large poles, construction timbers, and for multiple timber applications. Hex shank design for use in impact wrench drills. Full-length heat treated bit guards against bending in heavy-duty applications and strengthens the twist where the greatest strain occurs. Bit can be resharpened Medium-fast screw point ideal for general woodboring applications.

• Diameter: 11/16"
• Flute Length: 21"
• Overall Length: 24"
• Shank Size: 5/8"

Single spur, cutter, and side lip design bore through creosoted poles without clogging, binding, or stopping to clear chips

Single spur, cutter, and side lip design bore through creosoted poles without clogging, binding, or stopping to clear chips

Single spur, cutter, and side lip bore through creosoted poles without clogging, binding, or stopping to clear chips Extra-long twist is ideal for boring large poles, construction timbers, and for multiple timber applications. Hex shank design for use in impact wrench drills. Full-length heat treated bit guards against bending in heavy-duty applications and strengthens the twist where the greatest strain occurs. Bit can be resharpened. Medium-fast screw point ideal for general woodboring applications

• Diameter: - 1-1/16"
• Twist Length: 5/8"
• Overall Length: 24"
• Shank Size: 5/8"

Single spur, cutter, and side lip design bore through creosoted poles without clogging, binding, or stopping to clear chips. Extra-long twist is ideal for boring large poles, construction timbers, and for multiple timber applications. All bits feature 7/16" adaptable hex shank; simply remove it to use round shank. Full-length heat treatment guards against bending in heavy-duty applications and strengthens the twist where the greatest strain occurs. Bit can be resharpened Medium-fast screw point ideal for general woodboring applications.

• Diameter: 1 1/16"
• Twist Length: 24"
• Overall Length: 29"
• Shank Size: 7/16"

MILWAUKEE® M18 FUEL™ 7/16” Quick-Release Hex Utility High Torque Impact Wrench w/ ONE-KEY KIT™ delivers the Fastest Drilling Speed, More Power, and is Built for Maximum Control. The POWERSTATE™ Brushless Motor and all-new mechanism provide linemen with 30% faster drilling speeds, increasing your productivity while on the job. With up to 750ft-lbs max torque, this battery powered impact wrench gives you more power for effortless removal of rusted or corroded hardware. It is ergonomically designed for the lineman, providing you with superior control whether in-bucket, on-ground or climbing.

All Irwin Drill Bits with 7/16" (Q/R) Quick Change Quick Release Q/R shank will fit MILWAUKEE® M18 FUEL™ 7/16”