6-1/2" Wedge Clamp Conductor .250"-.414" MSI 7187
MSI H-7187, 6-1/2" Wedge Clamp, is mechanical holding device used for strain relief in service applications. It has solid stainless bails that are used on eye hooks and insulators with a diameter larger than 1.5". This clamp is designed for low tension applications only, and also has a mechanical working load of 1,200 lbs.
Specifications/Applications:
- Bail Size: 6-1/2"
- Material: Solid Stainless Steel
- Conductor Diameter Range: 0.250" - 0.414"
- ACSR ASTM-B232: 1/0 - #4
- AAAC ASTM-B399: 1/0 - #4
- AAC ASTM-B231: 2/0 - #2
Banding 1-1/4" x 100' Aluma-Form SSB-100 MADE IN USA (Currently Unavailable)
Aluma-Form band used to wrap around poles to hold attachments 10ft length. 1 1/4" wide 100ft length. Without drilling holes, Bolt-A-Band features a pre-cut, high quality stainless steel band with accompanying installation hardware. Adjust easily to fit most any size pole. Installs in just minutes with no special tools required.
Two buckles required for all band brackets and attachments.
Bracket Mast Clamp Pipe Range 2-4" H-SMB-40
Used with service wedge clamps to attach the neutral wire of a drop cable to the service mast
To provide a secure attachment point for service drop wire
The center of the front strap is formed in a generous radius to prevent damaging the bail of service wedge clamps
permit installation of the bracket without removing the bolt
Special slot feature captures the carriage bolt shoulder to prevent it from turning or slipping out after installation
Constructed of high quality steel, hot-dip galvanized
Bracket Mast Clamp Pipe Range 2-4" H-SMB-40
Bracket Mast Clamp 1¼" - 3" Pipe Range H-J0590
Used with service wedge clamps to attach the neutral wire of a drop cable to the service mast
To provide a secure attachment point for service drop wire
The center of the front strap is formed in a generous radius to prevent damaging the bail of service wedge clamps
permit installation of the bracket without removing the bolt
Special slot feature captures the carriage bolt shoulder to prevent it from turning or slipping out after installation
Constructed of high quality steel, hot-dip galvanized
Double Banded Standoff Bracket ALU-6B-ASO-8
ALU 6B-ASO-8 Double Banded Standoff Bracket,-WayTslot Band 6"riser8"wide Double Banded Only no thru-bolt No holes for thru-bolt or lags. Used in Heavy duty pole applications.
Banding and Two buckles required for all band brackets and attachments. These items must be purchased separately.
Guy Roller J6288
- Use with J6650 Connecting Link and Pole Bands. Roller wire seat radius: 0.41", wire seat diameter: 2 & 1/16" w/ 13/16" Hole
- Constructed of high quality steel, hot-dip galvanized.
Must purchase Cotter Pin (H-M-111-2A) and Clevis Pin (H-CP-6-30) separately.
Pole Band Connecting Link J6650
- Use with J6288 Guy Roller /Pole Bands. Each J6650 link consists of one pair (two halves)
- Constructed of high quality steel, hot-dip galvanized.
Must purchase Cotter Pin (H-M-111-2A) and Clevis Pin (H-CP-6-30) separately.
Pole Band Connecting Link J6650
POLE BAND H-J6684 FITS POLES 12"-16" DIAMETER
FITS POLES 12"-16" DIAMETER H-J6684 •Adjustable Pole Bands provide attachment points for guys and suspension insulators with J6650 Connecting Link •Each Adjustable Pole Band Assembly contains four 1/4" x 4" stampings, four 3/4" threaded studs, and sixteen 3/4" Regular Square Nuts. •Each stamping has a 9/16" square hole. All components hot dip galvanized to meet ASTM Specification A153. Hot Dip Galvanized J6650 Connecting Link Mounting Positions: All Four Sides. Use with H-J6650 Connecting Link & H-J6288 GUY ROLLER, H-CP-6-30 CLEVIS PIN 3/4" x 2.5" and M-111-2A cotter Pin must buy seperately
POLE BAND H-J6684 FITS POLES 12"-16" DIAMETER
POLE BAND J6641 FITS POLES 9.5"-13.5 DIAMETER
Adjustable Pole Bands provide attachment points for guys and suspension insulators with
J6650 Connecting Link Each unit incorporates four (4) 3/4-inch diameter studs and each band section has 9/16-inch square holes for lag screws. Ultimate Tensile Strength: 20,000 Lbs. Band Section: 1/4" x 4" (except J6643--5/16" x 3") J6650 Connecting Link Mounting Positions: All Four Sides. Hot Dip Galvanized. Use with H-J6650 Connecting Link & H-J6288 GUY ROLLER, H-CP-6-30 CLEVIS PIN 3/4" x 2.5" and M-111-2A cotter Pin must buy separately
POLE BAND J6641 FITS POLES 9.5"-13.5 DIAMETER
POLE BAND J6644 FITS POLES 8"-11" DIAMETER
Adjustable Pole Bands provide attachment points for guys and suspension insulators with
J6650 Connecting Link . Each set incorporates four (4) 3/4-inch diameter studs and each band section has 9/16-inch square holes for lag screws. Ultimate Tensile Strength: 20,000 Lbs. Band Section: 1/4" x 4" (except J6643--5/16" x 3") J6650 Connecting Link Mounting Positions: All Four Sides. Hot Dip Galvanized FITS POLES 8"-11" DIAMETER . Use with H-J6650 Connecting Link & H-J6288 GUY ROLLER, H-CP-6-30 CLEVIS PIN 3/4" x 2.5" and M-111-2A cotter Pin must buy separately
POLE BAND J6644 FITS POLES 8"-11" DIAMETER
