J Hook Puller 5/8 Impact

5/8" Impact "J" Hook Puller. For easy installation and removal of "J" Hooks. Heavy-Duty construction permits faster driving and extraction of J Hooks. Heat-treated, high-tensile steel, for use in impact wrench.

Pole Step Driver / Remover 5/8" Impact. 5/8" Impact Pole Step Driver / Remover.

Shank Size: 5/8" Quick release - Drill Diameter: 9/16" - Twist Length: 4 1/2" - Overall Length: 7 1/2" Utility Pole Step bit Altec part# 981752759
Solid center design provides extra rigidity while boring Wide lands keep the bit straight as it bores through the hole.The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter, producing a faster, cleaner cut Single-spur cutting edge scribes the circumference of the hole for a smoother finish Coarse screw point provides fast boring in hard and soft woods.

Echo EDR-260 Gas Powered Reversible Drill

Engine Displacement (cc): 25.4; Torque (ft lb) 12; Carburetor: Butterfly-Valve Diaphragm; Maximum Chuck Diameter: 1/2 Standard; Fuel Capacity (fl. oz.): 14; Gear Reduction Ratio: 17:1:1; RPM: 0-650 Forward/Reverse; Consumer Warranty 5 years; Commercial Warranty: 2 years

Irwin 585-3043008 Auger Drill Bit with WeldTec (Q/R) Quick Release Shank 11/16", 7/16"

• Diameter: 11/16"
• Over Length: 17"
• Shank Size: 7/16" Quick Change Impact Shank
  
• WeldTec ship auger bits are made stronger and last longer because a harder cutting edge is welded to the base materials
• 2x Nail Cutting life compared to standard Irwin ship auger
• Patent pending welded cutting edge
• Wide Flukes
• 7/16" Quick Change Impact
• Fully Forged body on bits 3/4" diameter and larger

WeldTec Ship Auger bits are MADE STRONGER and LAST LONGER because a harder cutting edge is welded to the base material. 2X Nail Cutting Life compared to standard IRWIN ship augers Patent Pending Welded Cutting Edge Wide Flutes.

• Diameter: 13/16"
• Overall Length: 17"
• Shank Size: 7/16" Quick Change Impact Shank

Single spur, cutter, and side lip design bore through creosoted poles without clogging, binding, or stopping to clear chips. Extra-long twist is ideal for boring large poles, construction timbers, and for multiple timber applications. All bits feature 7/16" adaptable hex shank; simply remove it to use round shank. Full-length heat treatment guards against bending in heavy-duty applications and strengthens the twist where the greatest strain occurs. Bit can be resharpened Medium-fast screw point ideal for general woodboring applications.

• Diameter: 13/16"
• Flute Length: 18"
• Overall Length: 23"
• Shank Size: 7/16"

Single spur, cutter, and side lip design bore through creosoted poles without clogging, binding, or stopping to clear chips. Extra-long twist is ideal for boring large poles, construction timbers, and for multiple timber applications. All bits feature 7/16" adaptable hex shank; simply remove it to use round shank. Full-length heat treatment guards against bending in heavy-duty applications and strengthens the twist where the greatest strain occurs. Bit can be resharpened Medium-fast screw point ideal for general woodboring applications.

• Diameter: 9/16"
• Flute Length: 24"
• Overall Length: 29"
• Shank Size: 7/16"

Single spur, cutter, and side lip design bore through creosoted poles without clogging, binding, or stopping to clear chips

Single spur, cutter, and side lip design bore through creosoted poles without clogging, binding, or stopping to clear chips

Single spur, cutter, and side lip design bore through creosoted poles without clogging, binding, or stopping to clear chips. Extra-long twist is ideal for boring large poles, construction timbers, and for multiple timber applications. All bits feature 7/16" adaptable hex shank; simply remove it to use round shank. Full-length heat treatment guards against bending in heavy-duty applications and strengthens the twist where the greatest strain occurs. Bit can be resharpened Medium-fast screw point ideal for general woodboring applications.

• Diameter: 1 1/16"
• Twist Length: 24"
• Overall Length: 29"
• Shank Size: 7/16"

Single spur, cutter, and side lip bore through creosoted poles without clogging, binding, or stopping to clear chips. Extra-long twist is ideal for boring large poles, construction timbers, and for multiple timber applications. Hex shank design for use in impact wrench drills. Full-length heat treated bit guards against bending in heavy-duty applications and strengthens the twist where the greatest strain occurs. Bit can be resharpened Medium-fast screw point ideal for general woodboring applications.

• Diameter: 11/16"
• Flute Length: 15"
• Overall Length: 18"
• Shank Size: 5/8"

Single spur, cutter, and side lip bore through creosoted poles without clogging, binding, or stopping to clear chips. Extra-long twist is ideal for boring large poles, construction timbers, and for multiple timber applications. Hex shank design for use in impact wrench drills. Full-length heat treated bit guards against bending in heavy-duty applications and strengthens the twist where the greatest strain occurs. Bit can be resharpened Medium-fast screw point ideal for general woodboring applications.

• Diameter: 13/16"
• Flute Length: 15"
• Overall Length: 18"
• Shank Size: 5/8"

Single spur, cutter, and side lip bore through creosoted poles without clogging, binding, or stopping to clear chips. Extra-long twist is ideal for boring large poles, construction timbers, and for multiple timber applications. Hex shank design for use in impact wrench drills. Full-length heat treated bit guards against bending in heavy-duty applications and strengthens the twist where the greatest strain occurs. Bit can be resharpened Medium-fast screw point ideal for general woodboring applications.

• Diameter: 13/16"
• Flute Length: 21"
• Overall Length: 24"
• Shank Size: 7/16"

Single spur, cutter, and side lip bore through creosoted poles without clogging, binding, or stopping to clear chips. Extra-long twist is ideal for boring large poles, construction timbers, and for multiple timber applications. Hex shank design for use in impact wrench drills. Full-length heat treated bit guards against bending in heavy-duty applications and strengthens the twist where the greatest strain occurs. Bit can be resharpened Medium-fast screw point ideal for general woodboring applications.

• Diameter: 11/16"
• Flute Length: 21"
• Overall Length: 24"
• Shank Size: 5/8"

Single spur, cutter, and side lip bore through creosoted poles without clogging, binding, or stopping to clear chips. Extra-long twist is ideal for boring large poles, construction timbers, and for multiple timber applications. Hex shank design for use in impact wrench drills. Full-length heat treated bit guards against bending in heavy-duty applications and strengthens the twist where the greatest strain occurs. Bit can be resharpened Medium-fast screw point ideal for general woodboring applications.

• Diameter: 13/16"
• Flute Length: 21"
• Overall Length: 24"
• Shank Size: 5/8"

Single spur, cutter, and side lip bore through creosoted poles without clogging, binding, or stopping to clear chips Extra-long twist is ideal for boring large poles, construction timbers, and for multiple timber applications. Hex shank design for use in impact wrench drills. Full-length heat treated bit guards against bending in heavy-duty applications and strengthens the twist where the greatest strain occurs. Bit can be resharpened. Medium-fast screw point ideal for general woodboring applications

• Diameter: - 1-1/16"
• Twist Length: 5/8"
• Overall Length: 24"
• Shank Size: 5/8"

Single cutter and side lip effortlessly bores holes in wood where nails may be encountered. Cuts through nails without damaging the bit. Full-length heat treatment guards against bending in heavy-duty applications and strengthens the twist where the greatest strain occurs. Hex shank design for use in impact wrench drills Wide lands help keep bit straight as it bores Bit can be resharpened

• Diameter: 9/16"
• Twist Length: 9"
• Overall Length: 12"
• Shank Size: 7/16"

Solid center design provides extra rigidity while boring Wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter, producing a faster, cleaner cut

• Diameter: 9/16"
• Shank Size: 5/16"
• All bits have a 4-1/2" twist length and a 7-1/2" overall length

Single-flute cutting edge for greater control through steps Hex shank prevents slipping in drill chuck Also available with (TiN) coating for longer life. New SpeedPoint tip penetrates faster than previous Unibits and prevents walking Ideal for drilling holes into thin materials such as stainless steel, copper, brass, aluminum, plastic and laminates.

• Hole Sizes: 1/8" - 1/2"
• Number of Holes: 13 Steps
• Maximum Material Thickness: 1/8"

Irwin 585-1826637 Pole Auger Drill Bit with WeldTec

• Diameter: 13/16"
• Flute Length: 21"
• Overall Length: 24"
• Shank Size: 7/16"
• Welded high speed steel cutting edge is sharper and larger than standard pole augers, so it cuts faster and lasts longer in dense, treated, or soaked wood.
• Feed screw is 50% larger and has a 10% faster pitch than standard pole augers, and is designed specifically for drilling deep holes in dense wood.
• Flutes are nearly two times wider than standard pole augers for maximum chip removal in deep holes.Clean cutting spur is located opposite the cutting edge. It scribes the hole before cutting for cleaner, faster drilling and more efficient transfer of chips to the flute, enhancing overall drilling speed.

Sized: 1/16" through 1/2" by 64ths. Hinged metal box with two stand-up bit holders. General-purpose, high-speed bits for reliable performance in a wide range of materials. Standard jobber length. Black-oxide finish reduces chip welding. Lightly roughened surface has higher lubricity for easier chip flow.

Sized: 1/16" through 1/2" by 32nds. Hinged metal box with two stand-up bit holders. General-purpose, high-speed bits for reliable performance in a wide range of materials. Standard jobber length. Black-oxide finish reduces chip welding. Lightly roughened surface has higher lubricity for easier chip flow.

Hinged metal box with one stand-up bit holder. General-purpose, high-speed bits for reliable performance in a wide range of materials. Standard jobber length. Lightly roughened surface has higher lubricity for easier chip flow.

Ship Auger Bit with Screw Point 3/4-Inch

• Bits drill through nails, wood, vinyl, plastics, and heavy timber
• Special bit steel with machine-ground flutes and polished edges for smooth, wobble-free boring
• Full length is heat-treated and tempered
• Feed-screw pilot draws bit into wood
• Head and twist are ground to correct clearance for easy removal from hole
• For heavy construction and repair work in mines, on docks and bridges as well as electrical work

Ship Auger Bit with Screw Point 7/8-Inch Video Ship Auger Bit with Screw Point 7/8-Inch

• Bits drill through nails, wood, vinyl, plastics, and heavy timber
• Special bit steel with machine-ground flutes and polished edges for smooth, wobble-free boring
• Full length is heat-treated and tempered
• Feed-screw pilot draws bit into wood
• Head and twist are ground to correct clearance for easy removal from hole
• For heavy construction and repair work in mines, on docks and bridges as well as electrical work

Steel Ship Auger Bit, Screw Point, 1 x 4-Inch

• Bits drill through nails, wood, vinyl, plastics, and heavy timber
• Special bit steel with machine-ground flutes and polished edges for smooth, wobble-free boring
• Head and twist are ground to correct clearance for easy removal from hold
• Feed-screw pilot draws bit into wood
• Full length is heat-treated and tempered
• For heavy construction and repair work in mines, on docks and bridges as well as electrical work

Steel Ship Auger Bit, Screw Point, 1-1/8 x 4-Inch

• Bits drill through nails, wood, vinyl, plastics, and heavy timber
• Special bit steel with machine-ground flutes and polished edges for smooth, wobble-free boring
• Head and twist are ground to correct clearance for easy removal from hole
• Feed-screw pilot draws bit into wood
• Full length is heat-treated and tempered
• For heavy construction and repair work in mines, on docks and bridges as well as electrical work

Steel Ship Auger Bit, Screw Point, 1-1/8 x 4-Inch

• Bits drill through nails, wood, vinyl, plastics, and heavy timber
• Special bit steel with machine-ground flutes and polished edges for smooth, wobble-free boring
• Deep, open throat design clears chips for faster, cleaner cuts
• Feed-screw pilot draws bit into wood
• Full length is heat-treated and tempered
• Shanks are 7/16-Inch hex to fit 1/2-Inch (13 mm) and larger three-jaw chucks
• Head and twist are ground to correct clearance for easy removal from hole
• For heavy construction and repair work in mines, on docks and bridges, and for electrical work

Klein Tools 2-In-1 Slotted Impact Socket Set, 12-Point, 6-Piece

• Twelve sizes combined into six sockets including: 1-1/8 x 15/16-Inch, 1 x 13/16-Inch, 7/8 x 11/16-Inch, 3/4 x 9/16-Inch, 5/8 x 7/16-Inch, and 1/2 x 3/8-Inch
• 1-1/8 x 15/16-Inch and 3/4 x 9/16-Inch impact sockets features an alignment slot to tighten and loosen most pole hardware
• Single-ended impact socket wrenches with hands free adjustment between socket sizes
• Two coaxial spring loaded sockets in one tool
• Sockets have a high-torque, 12-Point design making it easier to position on fasteners
• Deep socket with a 1/2-Inch drive works great for pole hardware installation and removal
• Cross hole design helps maintain socket connection to adapter or impact wrench
• Engineered for use with impact wrenches including Klein's 1/2-Inch Compact Impact Wrench (Cat. Nos. BAT20-CW, BAT20-CW1)
• Sockets are color coded to quickly identify slotted and sizes
• Includes case for storage

• Power Conduit Reamer reams 1/2-Inch (13 mm), 3/4-Inch (19 mm) and 1-Inch (25 mm) conduit and install fittings in a fraction of the time
• Reduce time on projects with large quantities of conduit runs
• Designed to fit into power drill chucks and quick release adapters with improved bit retention
• Includes precision engineered replaceable reaming blade
• Made in USA
• Replacement blades (SKU #19353) are available and the only approved blade for use in our tool
• Made in the USA
• Designed to be used on Electrical Metallic Tubing (EMT)

The Milwaukee® Ship Auger Bit drills through up to 2X. Drill into clean or nail-embedded wood with confidence when installing Romex wire, Pex water lines, rebar, bolts, and rope in piers, playground equipment and landscaping. The flutes are wider for maximum chip removal, even in deep holes. The polished and coated flute finish means chips won't stick to the bit, even when drilling in material that contains sap or glue.

Milwaukee® Spur Auger Bit drills through up to 2X the nails of competitive auger bits without needing resharpening. Drill into clean or nail-embedded wood with confidence when installing Romex wire, Pex water lines, rebar, bolts, and rope in piers, playground equipment and landscaping.

The Milwaukee® Ship Auger Bit drills through up to 2X the nails of competitive auger bits without needing resharpening. Drill into clean or nail-embedded wood with confidence when installing Romex wire, Pex water lines, rebar, bolts, and rope in piers, playground equipment and landscaping.

SHOCKWAVE™ Lineman's Impact Auger Bits are engineered to deliver cleaner, faster holes in wooden utility poles. They feature a single spur design, which scores the edge of the hole, creating a cleaner finish that allows bolts to slide through without resistance. The auger bits are coated with a reinforced anti-friction PTFE coating for overall smoother drilling and easier removal of the bit from the pole. The aggressive feed screw and cutting edge pull the bit through the material while the optimized wide flute geometry quickly ejects the chips to clear the hole and reduce clogs for overall faster drilling speeds.

SHOCKWAVE™ Lineman's Impact Auger Bits are engineered to deliver cleaner, faster holes in wooden utility poles. They feature a single spur design, which scores the edge of the hole, creating a cleaner finish that allows bolts to slide through without resistance. The auger bits are coated with a reinforced anti-friction PTFE coating for overall smoother drilling and easier removal of the bit from the pole. The aggressive feed screw and cutting edge pull the bit through the material while the optimized wide flute geometry quickly ejects the chips to clear the hole and reduce clogs for overall faster drilling speeds.

MILWAUKEE 48-13-6805 ShockWave Linemen Impact Auger Bit 11/16" X 24" 7/16 Q/R Shank
The SHOCKWAVE™ Lineman's Impact Auger Bits are engineered to deliver cleaner, faster holes in wooden utility poles. They feature a single spur design, which scores the edge of the hole, creating a cleaner finish that allows bolts to slide through without resistance. The bits are coated with a reinforced anti-friction PTFE coating for overall smoother drilling and easier removal of the bit from the pole. The aggressive feed screw and cutting edge pull the bit through the material while the optimized wide flute geometry quickly ejects the chips to clear the hole and reduce clogs, leading to overall faster drilling speeds.
Specifications:

• Diameter: 11/16"
• Length: 24"
• 7/16" Quick Release Shank

SHOCKWAVE™ Lineman's Impact Auger Bits. The auger bits are coated with a reinforced anti-friction PTFE coating for overall smoother drilling and easier removal of the bit from the pole. The aggressive feed screw and cutting edge pull the bit through the material while the optimized wide flute geometry quickly ejects the chips to clear the hole and reduce clogs for overall faster drilling speeds.

SHOCKWAVE™ Lineman's Impact Auger Bits. The auger bits are coated with a reinforced anti-friction PTFE coating for overall smoother drilling and easier removal of the bit from the pole. The aggressive feed screw and cutting edge pull the bit through the material while the optimized wide flute geometry quickly ejects the chips to clear the hole and reduce clogs for overall faster drilling speeds.

SHOCKWAVE™ Lineman's Impact Auger Bits. The auger bits are coated with a reinforced anti-friction PTFE coating for overall smoother drilling and easier removal of the bit from the pole. The aggressive feed screw and cutting edge pull the bit through the material while the optimized wide flute geometry quickly ejects the chips to clear the hole and reduce clogs for overall faster drilling speeds.

Install small wire systems easily and efficiently with the Milwaukee® Bellhanger Bits. Designed for installing all types of small wire systems including computer, security, phone, and cable, Milwaukee Bellhanger Bits provide extra reach where needed and a hole in the tip to help pull wires through holes.

SHOCKWAVE™ Impact Duty™ Magnetic Bit Holders. The MILWAUKEE magnetic bit holders are made from proprietary steel, heat treated to control hardness. The SHOCKWAVE™ magnetic bit holders feature a powerful magnet, providing you with a secure grip and unyielding bit engagement. Each bit holder has a 2-piece construction for optimal assembly in abusive applications. Our SHOCKWAVE™ Impact Duty™ Magnetic Bit Holders can now be used with with Milwaukee SHOCKWAVE™ Impact Duty Insert Magnetic Nut Drivers (¼”, 5/16”, ⅜”, 7/16”, ½”).

SHOCKWAVE™ Impact Duty™ Magnetic Bit Holders. The MILWAUKEE magnetic bit holders are made from proprietary steel, heat treated to control hardness. The SHOCKWAVE™ magnetic bit holders feature a powerful magnet, providing you with a secure grip and unyielding bit engagement. Each bit holder has a 2-piece construction for optimal assembly in abusive applications. Our SHOCKWAVE™ Impact Duty™ Magnetic Bit Holders can now be used with with Milwaukee SHOCKWAVE™ Impact Duty Insert Magnetic Nut Drivers (¼”, 5/16”, ⅜”, 7/16”, ½”).

SHOCKWAVE™ Lineman's 3-in-1 Distribution Utility Socket More Secure, Efficient Fastening

• 3 in 1 Square Design for Single-Sided Fastening
• For use 3/4", 1" and 1-1/8" square nuts.
• Push and Twist Barrel Lock for secure, one handed size changes.
• Debris Shield - to resist interior rust and corrosion from dirt, wood chips and moisture on the jobsite
• Includes 7/16" Hex to 1/2" Square Adapter for use with 7/16" quick connect chucks
• Socket features a 1/2" Square Drive
• For use with 1/2", 5/8" and 3/4" Square Headed Machine Bolts
• Designed for the installation and removal of hardware on utility poles
• Includes 2 Pieces

SHOCKWAVE Lineman's Pole Step Socket

• Engineered to be the easiest way to remove 5/8" pole steps from wooden utility poles
• Quick Insert Slot Geometry allows for the easiest set up on the hardware
• Hardware hook reduces hardware drops
• Rounded edges for safer hardware removal
• Designed for use with 5/8" pole steps
• Can be used to install with a pre-drilled hole
• 7/16" to 1/2" Lineman's Impact Socket Adapter included
• 1/2" Square Drive
• Features a pin detent hole for locking onto pin detent tools and adapters

SHOCKWAVE™ Lineman's Fiberglass Drill Bits are engineered to deliver cleaner, straight through holes in composite and fiberglass utility poles and crossarms. Our carbide tip design reduces friction, allowing you to make faster, cleaner cuts while maintaining best life. Our fiberglass drill bits are available in 12" and 22" lengths, which can pass through power utility poles and arms in a single pass. The heated treated carbon 7/16" hex shank increases strength and durability when drilling through fiberglass and composite power utility poles.
MILWAUKEE 48-13-7805, MILWAUKE 48-17-7807, MILWAUKEE 48-13-7809

Pole Step Driver / Remover 5/8 Impact

5/8" Impact Pole Step Driver / Remover. Heavy-Duty construction permits faster driving and extraction of pole steps. Heat-treated, high-tensile steel, for use in impact wrench.

Pole Step Driver / Remover 7/16 Impact

7/16" Impact Pole Step Driver / Remover. Heavy-Duty construction permits faster driving and extraction of pole steps. Heat-treated, high-tensile steel, for use in impact wrench.