Home > Pole Line Hardware > Anchors and Rods >

*8" TWIN SOLID SQUARE HUB HELIX POWER DRIVEN ANCHOR 1-3/8" HUB - 6000 FT. LB. FOR 3/4" AND 1" RODS D8426-HUB1021636
MSI D10426 8" TWIN SOLID SQUARE HUB HELIX POWER DRIVEN ANCHOR 1-3/8" HUB - 6000 FT. LB. FOR 3/4" AND 1" RODS
 
Alternative Views:
Our Price: $126.19


Product Code: H-D8426-HUBE1021636
Qty:

Description
 
  • Installation is performed using a power digger. An anchor wrench fits over the square hub and a torque measurement device is required to determine proper installation.
  • Correct installation is achieved only when the anchor is installed using the appropriate torque for the particular soil and anchor type.
  • Installation torque is usually measured using a device connected in series with the wrench, digger, and Kelley Bar during installation.
Features
  • Mid- Strength Anchor Helix- 6,000 Ft Lbs ( 8,136 N-M), Two 10" (254 mm) Helices for use with 0.75" (19.1 mm) or 1" (25.4 mm) Rod.
    • Holding strength per soil class with 3/4" rod:
      • Soil Class 2: 43000 lbs (Limited by rod strength)
      • Soil Class 3: 37500 lbs (Limited by rod strength)
      • Soil Class 4: 32500 lbs (Limited by rod strength)
      • Soil Class 5: 27500 lbs (Limited by rod strength)
      • Soil Class 6: 23000 lbs
      • Soil Class 7: 18000 lbs
    • Holding strength per soil class with 1" rod:
      • Soil Class 2: 43000 lbs (Limited by rod strength)
      • Soil Class 3: 37500 lbs (Limited by rod strength)
      • Soil Class 4: 32500 lbs
      • Soil Class 5: 27500 lbs
      • Soil Class 6: 23000 lbs
      • Soil Class 7: 18000 lbs



Klein 53002 Regular-Point Drill-Bit Set, 13-Piece
Klein 53002 Regular-Point Drill-Bit Set, 13-Piece
$23.99