The Mini-Duct Hunter™ Accessory Kit is designed for 3/16-in. diameter fiberglass rod and includes everything you need to splice broken rod or replace end ferrules on the job site.

The Mini-Duct Hunter™ is a traceable duct rodder that offers a non-invasive solution for locating and mapping underground ducts and pipes measuring between 1/2 and 1-1/2 in. in diameter. The detectable fiberglass rod incorporates a 22 AWG copper trace wire that can be located at depths up to 10 feet. When the energized Mini-Duct Hunter™ rod is pushed into pipe, the signal radiates outward to the surface. A signal receiver detects the frequency applied to the Mini-Duct Hunter™, allowing the pipe to be traced inside walls, floors or underground. Accessory kit is included.

The Mini-Duct Hunter™ is a traceable duct rodder that offers a non-invasive solution for locating and mapping underground ducts and pipes measuring between 1/2 and 1-1/2 in. in diameter. The detectable fiberglass rod incorporates a 22 AWG copper trace wire that can be located at depths up to 10 feet. When the energized Mini-Duct Hunter™ rod is pushed into pipe, the signal radiates outward to the surface. A signal receiver detects the frequency applied to the Mini-Duct Hunter, allowing the pipe to be traced inside walls, floors or underground. Accessory kit is included.

Jameson 1/2" x 1500' Marked Big Buddy Duct Rodder. This heavy duty rodder is ideal for manhole to manhole work or long run cable pulls with the ability to operate vertically or horizontally , the MEGA buddy has the versatility to handle the toughest jobs. Also features a drag brake and safety feed eye to control pay out. Has 10" bending radius, 1,400lb pull tensile strength and includes end ferrule and pulling eye. The accessory kit not included