You are here: Home > Pole Line Hardware > Clamps, Suspensions, And Guy Wire Clamps > Guy Clamps
We found 14 results matching your criteria.
Guy Clamps
Sort By:
1
Allied H-885 1/4" Malleable Guy Clip 1/4" Malleable Guy Clip Allied H-885

  • For 1/4" Strand
  • A heavy duty means of securing down guys and wire rope.
  • Comprised of a Malleable Iron base, “U” bolt, and two hex nuts.
  • All components are hot dip galvanized to meet ASTM Specification A153.

Our Price: $0.50
Allied H-886- 5/16" Malleable Guy-Clip 5/16" Malleable Guy-Clip Allied H-886-

  • For 5/16 Strand
  • A heavy duty means of securing down guys and wire rope.
  • Comprised of a Malleable Iron base, “U” bolt, and two hex nuts.
  • All components are hot dip galvanized to meet ASTM Specification A153.

Our Price: $0.59
PLP 0006547 Thimble 1/2" for ADSS Drop Cable Dead Ends 0006547 1/2" Open Thimble for ADSS Drop Cable Dead Ends PLP 0006547

Thimble Open, ADSS Drope Cable Dead-Ends 1/2 in; Opening Width - 3/4 in; Eye Width - 1 1/8 in; Eye Length - 2 in; Material - Steel, Plated

THIMBLE OPEN 1/2 Guy Strand J1058

Our Price: $1.10
SALE Price: $0.89
You save $0.21!
Allied H-887 3/8" Malleable Guy-Clip 3/8" Malleable Guy-Clip Allied H-887

  • for 3/8 strand
  • A heavy duty means of securing down guys and wire rope.
  • Comprised of a Malleable Iron base, “U” bolt, and two hex nuts.
  • All components are hot dip galvanized to meet ASTM Specification A153.

Our Price: $0.93
Crossover Clamp for 1/4" Strand H-4069 Crossover Clamp for 1/4" Strand H-4069

H-4069 Crossover Clamp for 1/4" Strand

  • Used in aerial construction at the mid-span to clamp two 1/4" strands together perpendicularly
  • Crossover plates are tapped to eliminate the handling of loose nuts
  • Stamped from AISI 1008 Steel

Our Price: $2.49
3/8" WIRE ROPE THIMBLE J1057 3/8" WIRE ROPE THIMBLE J1057

Used in guying applications to form an oval wire eye for securing to eye-bolts and guy rods.

  • Thimble, Wire Rope: Type - Guy Open Wire Rope
  • Strand Diameter - 3/8 in
  • Opening Width - 5/8 in
  • Eye Width - 7/8 in
  • Eye Length - 1 7/8 in
  • Material - Steel, Hot Dipped Galvanized
  • Weight - 8.80 lb/100.

THIMBLE OPEN 3/8 Guy Strand J1057

Our Price: $3.40
Guy Clamp One Bolt 1 9/16 - 1 1/2 J1061 Guy Clamp One Bolt J1061

1 Bolt Guy Clamp
3⁄16"-3⁄8" Strand Range
Part Number: J1061
Bellcore Specification 8624
Rolled from carbon steel with straight parallel grooves that will not damage strand
The clamping bolts have special shoulders to prevent turning when the nuts are tightened
Constructed of high quality steel, hot-dip galvanized.

Not to be used as a suspension clamp. Use a Guy Clamp only

Our Price: $3.46
1/2" WIRE ROPE THIMBLE J1058 1/2" WIRE ROPE THIMBLE J1058

Used in guying applications to form an oval wire eye for securing to eye-bolts and guy rods.
  • Thimble, Wire Rope: Type - Guy Open Wire Rope
  • Strand Diameter - 1/2 in
  • Opening Width - 3/4 in
  • Eye Width - 1 1/8 in
  • Eye Length - 2 in
  • Material - Steel, Hot Dipped Galvanized
  • Weight - 18.40 lb/100

THIMBLE OPEN 1/2 Guy Strand J1058

Our Price: $3.69
2 Bolt Guy Clamp 3-3/8Lng " with 1/2" Bolts J1030/ALL 5058 2 Bolt Guy Clamp 3-3/8Lng " with 1/2" Bolts J1030/ALL 5058

1/2" TWO BOLT GUY CLAMP 3-3/8" X 1-9/16" PLATES

    • Used to form guy loops that attach to anchor rods or dead-ends.
    • Parallel grooves accept strand without marring.
    • Plate halves align evenly for ease of installation.
    • Plate length is 3-3/8" and plate width is 1-9/16".
    • Strand sizes accommodated are 3/16" (2.2 M) -3/8" (10 M).
    • Comprised of two plates and two 1/2" X 1-5/8" Carriage Bolts with Regular Square Nuts.
    • Hot dip galvanized to meet ASTM Specification A153.
    • H-J1030-ALL-5058
    • This is not a suspension clamp

Our Price: $6.70
VISE TYPE BONDING CONNECTOR HUB GC-164 BRONZE VISE TYPE BONDING CONNECTOR HUB GC-164 BRONZE

For connecting ribbon or braid to ribbon, braid or bus.
Side Opening Jaw facilitates easy installation.

Run Conductor Size and Type Cu ribbon 1/4", Cu braid 1/4"
Tap Conductor Size and Type Cu 6 sol, Cu 6 str (7), Cu ribbon 1/4", Cu braid 1/4"

Our Price: $9.19
H-J931 3 Bolt Marriage Guy Clamp 6" with 5/8" Bolts, 5/16" - 1/2" Strand Range 3 Bolt Clamp Marriage Guy Clamp 6" with 5/8" Bolts, 5/16" - 1/2" Strand Range H-J931

MSI H-J931 3 Bolt Marriage Guy Clamp 6", 5/16" - 1/2" Strand Range
3 Bolt Clamp Marriage Guy Clamp

Specifications/Features:

  • Number of Bolts: 3
  • Clamp Bolt Diameter: 5/8"
  • Clamp Length: 6"
  • Clamp Width: 1-21/32"
  • Strand Diameter: 5/16" - 1/2"
  • Rolled from carbon steel with straight parallel groove that will not damage strand
  • The clamping bolts have special shoulders to prevent turning when the nuts are tightening
  • Construct of high quality steel, hot-dip galvanized


Not to be used as a suspension clamp. Can also be used with the SideWalk Guy Clamp End J0522

Our Price: $10.56
MSI H-J929 3 Bolt Marriage Guy Clamp 4"with 1/2" Bolts, 3/16" - 7/16" Strand Range 3 Bolt Clamp Marriage Guy Clamp 4"with 1/2" Bolts, 3/16" - 7/16" Strand Range H-J929

MSI H-J929 3 Bolt Marriage Guy Clamp 4"with 1/2" Bolts, 3/16" - 7/16" Strand Range
3 Bolt Clamp Marriage Guy Clamp
Specifications/Features:

  • Number of Bolts: 3
  • Clamp Bolt Diameter: 1/2"
  • Clamp Length: 4"
  • Clamp Width: 1-9/16"
  • Strand Diameter: 3/16" - 7/16"
  • Rolled from carbon steel with straight parallel groove that will not damage strand
  • The clamping bolts have special shoulders to prevent turning when the nuts are tightening
  • Construct of high quality steel, hot-dip galvanized
Not to be used as a suspension clamp

Our Price: $15.49
MSI H-J930 3 Bolt Marriage Guy Clamp 6" with 1/2" Bolts, 3/16" - 7/16" Strand Range 3 Bolt Clamp Marriage Guy Clamp 6" with 1/2" Bolts, 3/16" - 7/16" Strand Range H-J930

MSI H-J930 3 Bolt Marriage Guy Clamp 6" with 1/2" Bolts, 3/16" - 7/16" Strand Range
3 Bolt Clamp Marriage Guy Clamp

Specifications/Features:

  • Number of bolts: 3
  • Clamps clamp diameter: 1/2"
  • Clamp Length: 6"
  • Clamp Width: 1-9/16"
  • Strand Diameter: 3/16" - 7/16"
  • Rolled from carbon steel with straight parallel groove that will not damage strand
  • The clamping bolts have special shoulders to prevent turning when the nuts are tightening
  • Construct of high quality steel, hot-dip galvanized
Not to be used as a suspension clamp.


Our Price: $16.67
Messenger Extension Bracket 12"  SCB-12-5 Messenger Extension Bracket 12" SCB-12-5 (Current lead time of Jan 2024)

Provides a 12 inch clearance from the pole and is fastened with two 5/8 inch mounting bolts. Clamp plates are reversible to accept a wide range of messenger diameters.

  • Hot dip Glavanisex Ductile Iron

Our Price: $111.67
   
 
1