These rugged and lightweight corner blocks are used to guide cable and evenly distribute the load on the cable when pulling around corners.

These rugged and lightweight corner blocks are used to guide cable and evenly distribute the load on the cable when pulling around corners.

This 2-3/4 in. (70 mm) single roller block is designed to support fiber optic, self-support or small copper cables at poles.

This Block is normally used for pulling in self support or prelashed cable and is mounted with either a B, C, D, E, or F Cable Block Frame at a pole.

This block is used to support one cable up to 1" (25.40 mm) on new 1/4" (6.35 mm) strand. The high strength aluminum frame has a spring-loaded steel pin that keeps it locked on the strand & the cable on the nylon roller.

These rugged and lightweight corner blocks are used to guide cable and evenly distribute the load on the cable when pulling around corners.

D Cable Block - Supports aerial cable to 2 3/4" (70 mm) dia. Heat- treated aluminum alloy frame. Bi-directional locking lever.

Temporarily supports any cable up to 2-3/4 in. (70 mm) diameter on 1/4 - 3/8". (6-10 mm) suspension strand during new construction or overlashing to existing lashed cable.

This overlash cable block is perfect for temporarily suspending any cable up to 2 3/4 (70 mm) diameter on 1/4 - 3/8in (6-10 mm) diameter.

This block is functionally similar to the D cable block. This larger tool can be used with G cable lasher to handle cable up to 5". Vertical side rollers minimize cable friction during pull-in.

H-Block is used to pull cable towards or away from corner poles or other locations. Accommodates cable from 1-1/2-3" daimeter with a 5,000lb load capacity.

This versatile, economical block supports any cable up to 1 1/4 in. (32mm) in diameter including coaxial, up so you can use it in CATV cabling.

This block handles any cable or bundles up to 4" for temporarily supporting during stringing operations.

The Dual-Lashing Aerial Cable Guide is used to guide and straighten cables as they are pulled into a lashing position.

This 2-3/4 in. (70 mm) single roller block is designed to support fiber optic, self-support or small copper cables at poles.

This economical but durable guide meets the requirements for new strand construction only. The cable shoe can accommodate a 3" cable.

This simple tool makes the lashing process smoother by maintaining the proper lead between the lasher and cable block.