Home > High Voltage Testing Equipment > FLUKE NETWORKS >

TSŪ 19 Test Sets Telephone Test Set w/ Angeled Bed of Nails Clips Fluke Network TS19 19800009
Fluke Network TS19 19800009 Telephone Test Set
 
Our Price: $249.99


Product Code: FLUKE-TS19-19800009
Qty:

Description
 
Fluke Network TS19 19800009 Telephone Test Set
This test set was specifically designed for in-house telecom technicians. Its high impedance monitor prevents accidental disruption of service from clipping onto a data line while in monitor mode, thus ensuring the integrity of critical data lines. Features such as tone (DTMF) or pulse operation, talk/monitor capabilities, polarity test button and last number redial make this test set the perfect combination of features and price.
Specifications:
  • Loop Limit: 2.4 KO Maximum at 48 VDC (nominal 15 mA minimum loop current)
  • DC Resistance ( Talk Mode) : 150 O typical at 80 MA current
  • AC Impedance ( Monitor Mode) : Low Impedance (ring position) 600 at 1 KHz
  • Rotary Dial Output: 10 pps. 5 pps
  • Pulsing Rate: 60% + 2%
  • Percent Break: 800 ms typical
  • Interdigit Internal Leakage during break: 50 KO
  • DTMF Output: +1% maximum
  • Tone Frequency Error Level per tone pair: dbm maximum - dbm maximum
  • High versus low tone difference: 4 db maximum
  • Length: 8.75" (22.2cm)
  • Width: 2.375" (6.03cm)
  • Height: 3.375" (8.57cm)
Features
  • Features:
    • The LED indicates polarity
    • The red lights if the red test lead is connected to the tip (positive) side and black test lead is connected to the ring (negative) side.
    Test Services:
    • Monitoring
    • Polarity Check
    • Pulse/Tone Dialing
    • Short Circuit
    • Continuity
    Environmental Temperature:
    • Operating: -5 °C to °C
    • Storage: -40 °C to °C
    Drop:
    • 1 meter, 4 times
    Altitude:
    • To 3,000 meters (10,000') maximum
    Relative Humidity:
    • 10% - 80% (non-condensing)