DURA-LINE 1-20000200 LUBE F-100i, incorporates new lubricant technology to create a high performance, water-based pourable lubricant formulated for many applications, such as fiber optic, coaxial, 600 V and higher voltage-rated cables. It is designed to meet or exceed all cable pulling requirements with respect to viscosity, cling, drag, wetting, operational temperature range and reduction of pulling tension. Lubricant application systems are available. UL Listed.

12 quarts per case
Hydralube AT-500 is a high performance silicone lubricant formulated specifically for use with compressed air-assisted cable blowing and pushing systems such as the Plumett Cable Jetting and Arnco Air-Trak systems. These systems inject a high volume of air into the conduit which will rapidly dry out conventional cable placement lubricants (including silicone-based) and cause surface stickiness. Futhermore, the initial temperature of the compressed air can be very high, which will accelerate drying of the lubricant. Hydralube® AT-500 deposits a special low friction silicone coating on the conduit wall surface that is resistant to the drying effects of the rapid air movement and high heat. This product is fully compatible with cable jackets and HDPE or PVC conduit systems.

ONE CASE OF 12 QUARTS WINTER BLEND
Hydralube® AT-500 is a high performance silicone lubricant formulated specifically for use with compressed air-assisted cable blowing and pushing systems such as the Plumett Cable Jetting and Arnco Air-Trak systems. These systems inject a high volume of air into the conduit which will rapidly dry out conventional cable placement lubricants (including silicone-based) and cause surface stickiness. Futhermore, the initial temperature of the compressed air can be very high, which will accelerate drying of the lubricant. Hydralube® AT-500 deposits a special low friction silicone coating on the conduit wall surface that is resistant to the drying effects of the rapid air movement and high heat. This product is fully compatible with cable jackets and HDPE or PVC conduit systems.

• Silicone lubricant specially formulated for all air-assisted cable placement applications
• Resistant to the drying effects of high volume air movement
• Designed to leave a minute yet highly effective layer of silicone on the interior of the conduit
• Superior friction reduction properties with no “viscous drag” effects on cable
• Compatible with all types of cable and conduit

HydraLube F-200i incorporates new lubricant technology to create a high performance, water-based gel lubricant formulated for many difficult applications, such as 600 V and higher voltage-rated cables. F200i is designed to meet or exceed all cable pulling requirements with respect to viscosity, cling, drag, wetting, operational temperature range and reduction of pulling tension. Lubricant application systems are available. UL Listed.
5 gal pail/bucket

4 1 gallon jugs per case
Hydralube AT-500 is a high performance silicone lubricant formulated specifically for use with compressed air-assisted cable blowing and pushing systems such as the Plumett Cable Jetting and Arnco Air-Trak systems. These systems inject a high volume of air into the conduit which will rapidly dry out conventional cable placement lubricants (including silicone-based) and cause surface stickiness. Futhermore, the initial temperature of the compressed air can be very high, which will accelerate drying of the lubricant. Hydralube® AT-500 deposits a special low friction silicone coating on the conduit wall surface that is resistant to the drying effects of the rapid air movement and high heat. This product is fully compatible with cable jackets and HDPE or PVC conduit systems.