Condux 08035751 Splice Kit for 7/16" Duct Rodder

• Used to repair a 7/16" Duct Rodder if it breaks.
• Includes the following; Splice Tube, Epoxy, Installation Instruction

Condux 08035752 Splice Kit for 9/16" Duct Rodder

• Used to repair the Duct Rod if it breaks.
• Includes the following; Splice Tube, Epoxy, Installation Instruction

Condux 08035776, Replacement Repair Kit for 7/16" Duct Rodder includes Replacement Threaded Ending Fittings, 3 packs of Epoxy with applicator sticks, and sandpaper that all come standard in a Nylon Pouch that attaches to the Rodders' Cage for convenient access.

Condux 08035774, Replacement Repair Kit for 5/16" Duct Rodder includes Replacement Threaded Ending Fittings, 3 packs of Epoxy with applicator sticks, and sandpaper that all come standard in a Nylon Pouch that attaches to the Rodders' Cage for convenient access.

Attaches to the end fitting on the duct rod. Guides duct rod through the conduit and allows a pull line (diameter A) to be attached to the duct rod. Comes standard with each of the duct rodders. 3/8-16 thread fits 5/16 & 7/16 rods

Condux 08035772, Replacement Repair Kit for 1/4" Duct Rodder includes Replacement Threaded Ending Fittings, 3 packs of Epoxy with applicator sticks, and sandpaper that all come standard in a Nylon Pouch that attaches to the Rodders' Cage for convenient access.

Condux 08033494 3/8-16 USC Thread 7/16" Duct Rodder Accessory Kit
Includes:

• Canvas Bag,
• Roller Guide
• Splice Kit
• Epoxy
• Swivel Coupling
• Tapered Head
• Thread End Fittings

Condux 08033497 3/8-16 USC Thread 5/16" Duct Rodder Accessory Kit
Includes:

• Canvas Bag,
• Roller Guide
• Splice Kit
• Epoxy
• Swivel Coupling
• Tapered Head
• Thread End Fittings

Condux 08035778, Replacement Repair Kit for 9/16" Duct Rodder includes Replacement Threaded Ending Fittings, 3 packs of Epoxy with applicator sticks, and sandpaper that all come standard in a Nylon Pouch that attaches to the Rodders' Cage for convenient access.

Condux 08037534 Flexible Leader for 9/16" rod, helps guide the duct rod around bends, sweeps, and duct misalignment.
Specifications:
Rod Diameter: 9/16"
USC Thread: 3/4-10 Thread 24" Long

Condux 08037538 Flexible Leader for 3/8" rod, helps guide the duct rod around bends, sweeps, and duct misalignment.
Specifications:
Rod Diameter: 3/8"
USC Thread: 3/8-16 Thread 24" Long

Condux 08037401 Roller Guide
The Roller Guide helps guide the duct rod around bends, sweeps, and duct misalignments. Also used when the conduit is already
occupied by other cables.
Specifications:

• US Duct Rod Diameter: 7/16"
• USC Thread: 3/8" - 16"
• Duct Range ID: 2.5-6"

Use as a replacement to the factory installed end fittings if the end fitting breaks off or if the duct rod breaks close to the end of the rod. Installation instructions are included with the end fittings. Epoxy is required for installation and is ordered separately.

Condux 08037400 Roller Guide
The Roller Guide helps guide the duct rod around bends, sweeps, and duct misalignments. Also used when the conduit is already
occupied by other cables.
Specifications:

• US Duct Rod Diameter: 9/16"
• USC Thread: 3/4" - 10"
• Duct Range ID: 3-8"

Replacement fitting that's used on the working end of the rodder. Can be fixed and used the same day. This is the fitting that the accessories screw onto. Comes complete with fitting, epoxy kit, sand paper and Replacement fitting that's used on the carrier end of the rodder. Can be fixed and used the same day. Comes complete with fitting, epoxy kit, sand paper and instructions.

GMP 1/4” Male End Fitting Repair Kit 89411

Used to re-join a broken rod. Can be fixed and used the same day. Comes complete with splice, epoxy kit, sand paper and instructions. Don't have excessive down time if your rodder breaks. Order one with your new GMP Duct Rodder.
GMP 1/4” Duct Rodder Splice Repair Kit 89417

Replacement fitting that's used on the working end of the rodder. Can be fixed and used the same day. This is the fitting that the accessories screw onto. Comes complete with fitting, epoxy kit, sand paper and Replacement fitting that's used on the carrier end of the rodder. Can be fixed and used the same day. Comes complete with fitting, epoxy kit, sand paper and instructions.
GMP 1/2” Male End Fitting Repair Kit 89415

GMP RODDER ACCESSORY KIT 1/4" GMP 89424

Used to re-join a broken rod. Can be fixed and used the same day. Comes complete with splice, epoxy kit, sand paper and instructions. Don't have excessive down time if your rodder breaks. Order one with your new GMP Duct Rodder.
GMP DUCT SPLICE REPAIR KIT 1/2 GMP 89419

Used to re-join a broken rod. Can be fixed and used the same day. Comes complete with splice, epoxy kit, sand paper and instructions. Don't have excessive down time if your rodder breaks. Order one with your new GMP Duct Rodder.
GMP 3/8" Duct Rodder Splice Repair Kit 89418

GMP 89360 - Duct Rodder Accessory - Roller Guide for 3/8" (9mm) and 1/2" (12mm)
Duct Rodders.

These kits come complete with the everyday essentials you'll need for your rodding. Easily attached to the frame with....

Jameson Swivel Eye for the Big Buddy 1/2 inch. Attaches to end fitting of rod so pull line can be attached to rod.

This swivel pulling eye attaches to the end fitting of your Good Buddy®. It is the ideal accessory for attaching pull line or grips to the rod. The swiveling head prevents the pulling eye from backing off the threads. Includes (1) swivel eye with 3/8-16 thread.

Jameson Swivel Eye for the Easy Buddy. Attaches to end fitting of rod so pull line can be attached to rod.

Roller Guide for Easy Buddy.  guide rod though bends, sweeps, misalignment's, wires.

Jameson roller guide attaches to the end fitting of your Good Buddy®, increasing contact with pipe on lead end of rod to improve overall signal strength. It is the ideal accessory for guiding rod through bends, misalignments and occupied conduit. Includes (1) roller guide with 3/8-16 thread.
Guide for Good Buddy or Duct Hunter, fits 3/8", 7/16", & 5/16" Rods. Guides rod though bends, sweeps, misalignment's, wires.

Roller Guide for Big Buddy. Guides rod around bends, sweeps, misalignment's, wires.

Swivel coupling connects two rods when single length is not long enough it provides rotation when pulling line, wire or rope. For Big Buddy 1/2" rod

This splice repair kit is designed for 3/8-in. diameter fiberglass rod and includes everything you need to fix your Good Buddy® broken rod.
Kit includes

• (1) splice ferrule,
• (1) emery cloth and
• (1) two-component epoxy adhesive set.

This flexible spring leader attaches to the end fitting of your Easy Buddy®. It is has a pulling eye for attaching pull line or grips to the rod. Includes (1) flexible leader with pulling eye with 5/16 UNC-2A thread.

Splice repair kit includes splice ferrule, epoxy glue package and emery cloth. Splice. Repair Kit For Big Buddy 1/2" Jameson 11-140.

The flexible stinger tip attaches to the end fitting of your Big Buddy®/Mega Buddy®. Ideal accessory for guiding rod through bends, sweeps and misalignments. Includes (1) stinger tip with 3/8-16 thread. Guides rod through bends, sweeps and misalignments

Stinger Tip 6 FT. Big Buddy Jameson 11-25-6ST

Jameson flexible 12” x 3/16” dia. fiberglass stinger tip with fixed brass pulling eye easily attaches to the threaded end-ferrule on 3/8” Dia. Good Buddy® Conduit Rodders. This is the perfect accessory for guiding the rodder through tight bends, sweeps, and misalignments.
Includes
(1) stinger tip with 3/8 in., 5/15 in. and 7/16in. rods.

Marked Duct Rodder, Good Buddy II 3/8" x 400' Jameson 11A-25-400M is available in lengths up to 600', the....

Includes 2 Splice Ferrules, 1 End Ferrule,3 Glue Packages, 1 Emery Cloth
and a canvas storage bag (mounts on reel)

Includes Roller Guide, End Ferrule, Splice Ferrule, 2 Adhesives,
2 Emery Cloth and a canvas storage bag (mounts on reel)

The accessory kit is designed for 1/4-in. diameter fiberglass rod and includes everything you need to splice broken rod or replace end ferrules on the job site.

The end ferrule repair kit is designed for 1/4-in. diameter fiberglass rod and includes everything you need to replace your Easy Buddy® end ferrule.
Kit includes

• (1) end ferrule with 5/16 UNC-2A thread
• (1) emery cloth and
• (1) two-component epoxy adhesive set.

Use the loop section of the Easy Buddy Rod Grapple as a leader on the first rod, and push the rod into the duct....

Jameson swivel coupling is used for runs that are too long for one rodder. Connect two rods when single length is not long enough; provides rotation when pulling line, wire or rope. The swivel action of the coupler allows you to tighten both ends, effectively connecting two Good Buddy® duct rodders together via their male threaded ends. Includes (1) swivel coupling with 3/8-16 thread.

Use the loop section of the Good Buddy Rod Grapple as a leader on the first rod, and....

Includes 1 Splice Ferrule, 1 End Ferrule, 2 Glue Packages, 1 Emery Cloth
and a canvas storage bag (mounts on reel)

Jameson splicer repair kit comes with splice ferrule, adhesive, emery cloth, and instructions. Use with Duct Hunter 7/16 Detectable Rodder Traceable Rodder

To locate underground pipes or conduit, use sonde with Jameson's Buddy® Rodders and Fish Tapes or Duct Hunter™ Traceable Rodders. The heavy duty flexible chain adapter attaches rod to sonde. Fits 3/8" & 1/2" Buddy Rodders, 5/16" & 7/16" Duct Hunter Traceable Rodders.

Jameson 6-5 Replacement Feed Roller for Easy Buddy Rodder.
The replacement Feed Roller easy to install and ensures smooth and easy operation when feeding your Big Buddy Rod.

Jameson flexible 24” x 3/16” dia. fiberglass stinger tip with fixed brass pulling eye easily attaches to the threaded end-ferrule on 3/8” dia. Good Buddy® Conduit Rodders. This is the perfect accessory for guiding the rodder through tight bends, sweeps, and misalignments.
Includes
(1) stinger tip with 3/8 in., 5/15 in. and 7/16in. rods.

The Duct Hunter Accessory Kit is designed for 1/4-inch diameter fiberglass rod and includes everything you need to splice broken rod or replace end ferrules on the job site. All items store in a canvas pouch that attaches to the rodder frame for easy access. For use with fiberglass rod measuring 1/4 inch in diameter Includes a canvas pouch with (1) heavy-duty spring leader with chain, (1) end ferrule, (1) splice ferrule, (2) emery cloths, (2) two-component epoxy adhesive sets and (1) piece of heat shrink tubing.

The 1/4" Sonde Adapter is used with Jameson's Buddy System of Conduit Rodders or the Duct Hunter System of Traceable
Rodders to locate in underground pipes or conduit. Sonde Adapters vary in size. This adapter fits the 1/4" Easy Buddy Duct Rodder.
Size: 1/4"

The Locating Sonde and Adapter Kit works with a duct rodder to trace underground pipes and conduit. The kit includes an adapter (#9-169) and a sonde (#14-169).

The splice repair kit is designed for 1/4-in. diameter fiberglass rod and includes everything you need to fix your Easy Buddy broken rod.
Kit includes

• (1) splice ferrule
• (1) emery cloth
• (1) two-component expoxy adhesive set.

Swivel Coupling connects two rods when single length is not long enough. It provides rotation when pulling line, wire or rope.

Replacement Rod Easy Buddy® EZ-REEL™, 1/4 in. x 300 ft.
EZ-REEL™ pre-loaded replacement reels, providing improved speed and safety when replacing damaged duct rod.

Replacement Rod Easy Buddy® Conduit Rodder EZ-Reel, 1/4" x 400', Marked Every 5'

Easy Buddy® Conduit Rodder EZ-Reel, 1/4" x 500', Marked Every 5'