*Anchor Tool, Drive End Wrench 1.5" x 7' Kelly Bar 10,000 lbs Hubbell C3031064 Yellow

*Anchor Tool, Drive End Wrench, Orange 1 3/8" x 7' Kelly Bar 10,000lbs, Hubbell C1021583 Orange

*Anchor Tool, Drive Wrench Assembly Slingco

*CHOOSE YOUR DRIVE WRENCH ASSEMBLY FOR PRICING*
10K Drive Wrench Assembly for installation of screw anchors. Complete tool system includes Drive Wrench options, Wrench Lock, and Adapter.
Slingco’s Drive Wrenches are designed to allow anchor rods to telescope inside them, and securing to the Drive Wrench Lock Assembly. The Drive Wrench transfers the torque from the drive motor to the screw anchor. Rated to 10,000 ft-lb of torque, Slingco’s Drive Wrenches are tough and can handle anchor installs in tough environments.

• Orange Drive Wrench (# SAE09639)
• Yellow Drive Wrench (# SAE08666)
• Drive Wrench Lock (# SAE10425)
• 2.5 in Hex Kelly Bar Adapter (# SAE10486)
• 2.625 in Hex Kelly Bar Adapter (# SAE10427)

*Anchor Tool, Kelly Bar Adapter, 2.5" Hex, 10,000' lbs rating Hubbell 630011HD

Hubbell 630011HD Standard Kelly Bar Adapter 10,000 Ft Lbs (13,558 N-M) for 2 1/2" (63.5 mm) Hex Kelly Bar

• Kelly Bar Adapter attaches to truck's torque motor drive shaft (Kelly Bar)
• Locking Dog Assembly has six holes for 1/2" bolts on a 5-1/4" bolt circle, comes with six 1/2" Grade 5 bolts, nuts and lock washers
• Painted with green paint
• Includes Bent Arm Pin and Coil Lock

*Anchor, Tool, Kelly Bar Adapter, 2.0" Hex, 10,000' lbs. rating Hubbell 630013

Hubbell 630013 Standard Kelly Bar Adapter 10,000 Ft Lbs (13,558 N-M) for 2" (50.8 mm) Hex Kelly Bar

• Kelly Bar Adapter attaches to truck's torque motor drive shaft (Kelly Bar)
• Locking Dog Assembly has six holes for 1/2" bolts on a 5-1/4" bolt circle, comes with six 1/2" Grade 5 bolts, nuts and lock washers
• Painted with green paint
• Includes Bent Arm Pin and Coil Lock

*Anchor, Tool, Kelly Bar Adapter, 2.625in Hex, 10,000 ft-lb rating Hubbell 630012HD

Standard Kelly Bar Adapter 10,000 Ft Lbs (13,558 N-M) for 2 5/8" (66.7 mm) Hex Kelly Bar.

• Kelly Bar Adapter attaches to truck's torque motor drive shaft (Kelly Bar)
• Locking Dog Assembly has six holes for 1/2" bolts on a 5-1/4" bolt circle, comes with six 1/2" Grade 5 bolts, nuts and lock washers
• Painted with green paint
• Includes Bent Arm Pin and Coil Lock

*Anchor, Tool, No Wrench Anchor Hubbell E3030255

Especially designed for use with the Chance portable anchor installer. This tool bolts directly to the installer's output flange or Kelly bar adapter having six 1/2" dia. holes on a 5-1/4" bolt circle. Adjustable pivoting plates accept rods from 3/4" to 1-1/4" diameter.

For manually-installed foundations, eyenut must be temporarily installed for installation. Has four holes on 5-1/4" bolt circle for attachment. Includes four 1/2" x 1-1/2" bolts, nuts and lockwashers.

*Digital Wireless Torque Indicator with Bluetooth, 30,000 ft-lbs. Rating Hubbell C3031836

Hubbell C3031836 Digital Torque Indicator with Display

Digital Wireless Torque Indicator with wireless display

Anchor, Tool, Shear Pins-50lbs Hubbell C3030045

HUBBELL C3030045/S Shear Pin 50lbs (SURPLUS)
Pin for Shear Torque Indicator. Sold Each

To be use with PISA® Anchor Rod 1" X 7' D100 PISA® Anchor Rod 1" x 3' 1/2" or PISA® Anchor Rod 3/4" x 7' D75 Only.

PISA® Anchor Rod 1" x 3' 1/2" w/Coupler D10031/2

PISA® Anchor Rod 1" x 3' 1/2" w/Coupler 36,000lb Tensile Strength

Chance introduced this system of utilizing the power of digging equipment to install screw anchors. The system consists of a screw anchor, anchor rod and a special installing wrench. Each anchor has a galvanized steel threaded anchor rod with an upset hex; single or twin helices and a galvanized guy wire nut which is screwed to the anchor rod end. PISA anchors can be installed in a matter of minutes.

Use with MR1 MR2 Manta Ray or Power Drive Anchor Only.
Use with 1" EYENUT for-Pisa-Rod only J12585-D6567 or with 1" Thimble Eyenut J16512-ALL5095

PISA® Anchor Rod 1" X 7' D100

PISA® Anchor Rod 1" X 7' 36,000lb Tensile Strenght

Chance introduced this system of utilizing the power of digging equipment to install screw anchors. The system consists of a screw anchor, anchor rod and a special installing wrench. Each anchor has a galvanized steel threaded anchor rod with an upset hex; single or twin helices and a galvanized guy wire nut which is screwed to the anchor rod end. PISA anchors can be installed in a matter of minutes.

Use with MR1 MR2MRSR Manta Ray or Power Drive Anchor Only.
Use with 1" EYENUT for-Pisa-Rod only J12585-D6567 or with 1" Thimble Eyenut J16512-ALL5095

PISA® Anchor Rod 3/4" x 7' D75

Chance introduced this system of utilizing the power of digging equipment to install screw anchors. The system consists of a screw anchor, anchor rod and a special installing wrench. Each anchor has a galvanized steel threaded anchor rod with an upset hex; single or twin helices and a galvanized guy wire nut which is screwed to the anchor rod end. PISA anchors can be installed in a matter of minutes.

Use with MR1 MR2 Manta Ray or Power Drive Anchor Only.
Use with 1" EYENUT for-Pisa-Rod only J12585-D6567 or with 1" Thimble Eyenut J16512-ALL5095