HDG Communication Arm 3 & 2 - Position Steel Under-build, 15° Angled
15 degree angled Communication Arm 3 & 2 position Steel Under-build, galvanized for weather protection, and designed to allow for the addition of under-build cables. 36" & 24" in length from pole and 12" between mount holes.
All pole mounting and cable mounting holes are 11/16'' diameter.
WSO WB2751-B-HDG

INTERNAL/EXTERNAL TOOTH LOCK WASHER 1/2" FOR STAND OFF BRACKET

Alumaform 23710 1/2" Reg lock washer

Helical Lock Washer 1/2" for Stand-Off Bracket

Aluma form standoff bracket

Aluma-Form 6" Riser x 6" wide 6B-CSO-6 Band-able Standoff Bracket with an 6" wide 2-WAY T-SLOT CHANNELL . A multi-purpose bracket for mounting 1” through 2.5” conduit in a variety of ways. This bracket has a wide range of adjustability. T-slot extrusion eliminates field drilling. Mounts to the pole on 3-5/8” hole centers with 5/8” through bolt and 1/2” lag screw, Can also be banded. Pipe straps & Banded Buckle sold separately. One Band and buckle required for all 6B-CSO Standoff banded brackets.
Not wide enough for a 3" or 4" Pipe Strap

Aluma-Form 6" Riser x 8" wide 6B-CSO-8 Band-able Standoff Bracket with an 8" wide 2-WAY T-SLOT CHANNELL . A multi-purpose bracket for mounting 1” through 4” conduit in a variety of ways. This bracket has a wide range of adjustability. T-slot extrusion eliminates field drilling. Mounts to the pole on 3-5/8” hole centers with 5/8” through bolt and 1/2” lag screw, Can also be banded. Pipe straps & Banded Buckle sold separately. One Band and buckle required for all 6B-CSO standoff banded brackets.

Bolt Clamp Used to hold together banding around pole with hardware attached without drilling holes. Adjust easily to fit most any size pole. Installs in just minutes with no special tools required. Two buckles required for all banded brackets and attachments

Aluma-Form 6" Riser x 8" wide 6B-CSO-8-4WT  Band-able Standoff Bracket with
an 8" wide 4-WAY T-SLOT CHANNELL . A multi-purpose bracket for mounting
1” through 4” conduit in a variety of ways. This bracket has a wide
range of adjustability. T-slot extrusion eliminates field drilling.
Mounts to the pole on 3-5/8” hole centers with 5/8” through bolt and
1/2” lag screw, Can also be banded. Pipes straps & Banded Buckle sold separately. One Band and buckle required for all 6B-CSO standoff banded brackets.

Aluma-Form band used to wrap around poles to hold attachments 100ft length. 3/4" wide x .30 x 100ft length. Without drilling holes, Bolt-A-Band features a pre-cut, high quality stainless steel band with accompanying installation hardware. Adjust easily to fit most any size pole. Installs in just minutes with no special tools required.
Two buckles required for all band brackets and attachments.

T-SLOT 4 WAY CHANNEL ONLY 12" SOLD EA.
Used with Alumaform Standoff Brackets

T-SLOT 4 WAY CHANNEL ONLY 24" SOLD EA.
Used with Alumaform Standoff Brackets

T-SLOT 4 WAY CHANNEL ONLY 36" SOLD EA.
Used with Alumaform Standoff Brackets

T-SLOT 4 WAY CHANNEL ONLY 8" SOLD EA.
Used with Alumaform Standoff Brackets

Aluma-Form band used to wrap around poles to hold attachments 10ft length. 1 1/4" wide 100ft length. Without drilling holes, Bolt-A-Band features a pre-cut, high quality stainless steel band with accompanying installation hardware. Adjust easily to fit most any size pole. Installs in just minutes with no special tools required.
Two buckles required for all band brackets and attachments.

Multi-purpose bracket for mounting 1” thru 3” conduit in a variety of ways.

• Rises 4" off the pole with a 7" wide 4-way T-slot channel
• Comes with one 2" pipe strap and the 1/2" hardware for the T-slot channel
• optional 1", 1.5", 2.5" or 3" straps are not included
• 4 way T-Slot extrusion eliminates field drilling
• V-bracket Mounts to the wooden pole on 8 1/2” hole centers with 7/16” or 1/2” lag screws (not supplied)

ALU J3-CSO-6-J2 Standoff Mount. Rises 2" off the pole and is 6" wide Includes 2-way t-slot and 2" pvc pipe strap.

Standoff Mount Aluma-Form ALU J3-CSO-6-J2

Aluma-Form 6" Riser x 6" wide 6B-CSO-6-4WT Band-able Standoff Bracket with an 6" wide 4-WAY T-SLOT CHANNELL . A multi-purpose bracket for mounting 1” through 2.5” conduit in a variety of ways. This bracket has a wide range of adjustability. T-slot extrusion eliminates field drilling. Mounts to the pole on 3-5/8” hole centers with 5/8” through bolt and 1/2” lag screw, Can also be banded. Pipe straps & Banded Buckle sold separately. One Band and buckle required for all 6B-CSO standoff banded brackets. Not wide enough for a 3" or 4" Pipe Strap

Aluma-Form 6" Riser x12" wide 6B-CSO-12 Band-able Standoff Bracket with an 12" wide 2-WAY T-SLOT CHANNELL . A multi-purpose bracket for mounting 1” through 6” conduit in a variety of ways. This bracket has a wide range of adjustability. T-slot extrusion eliminates field drilling. Mounts to the pole on 3-5/8” hole centers with 5/8” through bolt and 1/2” lag screw, Can also be banded. Pipe Straps & Banded Buckle sold separately.
One Band and buckle required for all 6B-CSO standoff banded brackets.

Aluma-Form 6" Riser x 12" wide 6B-CSO-12-4WT Band-able Standoff Bracket with an 6" wide 4-WAY T-SLOT CHANNELL . A multi-purpose bracket for mounting 1” through 4” conduit in a variety of ways. This bracket has a wide range of adjustability. T-slot extrusion eliminates field drilling. Mounts to the pole on 3-5/8” hole centers with 5/8” through bolt and 1/2” lag screw, Can also be banded. Pipe Straps & Banded Buckle sold separately. One Band and buckle required for all 6B-CSO standoff banded brackets.

Aluma-Form 6" Riser x 18" wide 6B-CSO-18-4WT Band-able Standoff Bracket with an 18" wide 4-WAY T-SLOT CHANNELL . A multi-purpose bracket for mounting 1” through 4” conduit in a variety of ways. This bracket has a wide range of adjustability. T-slot extrusion eliminates field drilling. Mounts to the pole on 3-5/8” hole centers with 5/8” through bolt and 1/2” lag screw, Can also be banded. Pipe Straps & Banded Buckle sold separately.
One Band and buckle required for all 6B-CSO standoff banded brackets.

Aluma-Form 6" Riser x 24" wide 6B-CSO-24-4WT  Band-able Standoff Bracket with
an 6" wide 4-WAY T-SLOT CHANNELL . A multi-purpose bracket for mounting
1” through 4” conduit in a variety of ways. This bracket has a wide
range of adjustability. T-slot extrusion eliminates field drilling.
Mounts to the pole on 3-5/8” hole centers with 5/8” through bolt and
1/2” lag screw, Can also be banded. Pipe Straps & Banded Buckle sold separately. One band and buckle required for all 6B-CSO standoff banded brackets.

ALU 6B-ASO-8 Double Banded Standoff Bracket,-WayTslot Band 6"riser8"wide Double Banded Only no thru-bolt No holes for thru-bolt or lags. Used in Heavy duty pole applications.
Banding and Two buckles required for all band brackets and attachments. These items must be purchased separately.

T-SLOT 4 WAY CHANNEL ONLY 48" SOLD EA.
Used with Alumaform Standoff Brackets

Aluma-Form 6" Riser x 36" wide 6B-CSO-36-4WT  Band-able Standoff Bracket with
an 6" wide 4-WAY T-SLOT CHANNELL . A multi-purpose bracket for mounting
1” through 4” conduit in a variety of ways. This bracket has a wide
range of adjustability. T-slot extrusion eliminates field drilling.
Mounts to the pole on 3-5/8” hole centers with 5/8” through bolt and
1/2” lag screw, Can also be banded. Pipe Straps & Banded Buckle sold separately. One band and buckle required for all 6B-CSO standoff banded brackets.

Multi-purpose bracket for mounting 1” thru 4” conduit in a variety of ways.

• Rises 4" off the pole with a 8" wide 4-way T-slot channel Comes with 4" strap
• Comes with one 4" pipe strap and the 1/2" hardware for the T-slot channel
• optional 1", 1.5", 2.5", 3" or straps are not included
• 4 way T-Slot extrusion eliminates field drilling
• V-bracket Mounts to the wooden pole on 8 1/2" hole centers with 7/16” or 1/2” lag screws (not supplied)

Bolt Clamp Used to hold together banding around pole with hardware attached without drilling holes. Adjust easily to fit most any size pole. Installs in just minutes with no special tools required.
Two buckles required for all band brackets and attachments.

Model CS-820 universally accept outside cable diameters from 3/4” to 3” (19mm to 76mm)
Easily installed units that consist of an aluminum saddle, a polyethylene foam double coated bonding tape with pressure sensitive synthetic polymer (rubber based) adhesive, and a helically cut polyethylene cable tie.

BAND-IT 201 Stainless Steel Band 5/8" X 100' BAND-C20599STANDARD BOX

BAND-IT 201 Stainless Steel Band 3/4" X 100' BAND C20699 STANDARD BOX
Now with EASY SCALE, a patented imprint on the band to determine band length. Eliminates costly waste and complicated measuring by allowing users to quickly and precisely roll out the length of band needed for any clamp. No more guesswork!

Giant Band can be formed into a single or double wrapped clamp configuration, and offers the widest and thickest band to provide maximum strength.

• Produced with 201 Stainless Steel in a shiny finish
• Offers good resistance to oxidation and many moderate corrosive agents

BAND-IT 201 Stainless Steel Band 3/4" X 100' BAND C20699 STANDARD BOX
Now with EASY SCALE, a patented imprint on the band to determine band length. Eliminates costly waste and complicated measuring by allowing users to quickly and precisely roll out the length of band needed for any clamp. No more guesswork!

BAND-IT 201 Stainless Steel Band 3/4" X 100' BAND C20699 STANDARD BOX
Now with EASY SCALE, a patented imprint on the band to determine band length. Eliminates costly waste and complicated measuring by allowing users to quickly and precisely roll out the length of band needed for any clamp. No more guesswork!

BAND-IT 201 Stainless Steel Band 3/4" X 100' BAND C20699 STANDARD BOX
Now with EASY SCALE, a patented imprint on the band to determine band length. Eliminates costly waste and complicated measuring by allowing users to quickly and precisely roll out the length of band needed for any clamp. No more guesswork!

BAND-IT 201 Stainless Steel Band 3/4" X 100' BAND C20699 STANDARD BOX
Now with EASY SCALE, a patented imprint on the band to determine band length. Eliminates costly waste and complicated measuring by allowing users to quickly and precisely roll out the length of band needed for any clamp. No more guesswork!

Conduit bracket strap 1" used to secure conduit to pole. Comes with two 1/2 X 1 1/4 hex head bolts.
Aluminum Conduit Bracket Strap, used with T-Slot shapes to secure conduit to pole. Supplied with two 1/2" x 1 1/4" hex head bolts, lockwashers and hex nuts.

Conduit bracket Strap 2" used to secure conduit to pole. Comes with two 1/2" X 1 1/4 hex head bolts.
Aluminum Conduit Bracket Strap, used with T-Slot shapes to secure conduit to pole. Supplied with two 1/2" x 1 1/4" hex head bolts, lockwashers and hex nuts.

Conduit bracket strap 3" used to secure conduit to pole. Comes with two 1/2" x 1 1 1/4 hex head bolts.
Aluminum Conduit Bracket Strap, used with T-Slot shapes to secure conduit to pole. Supplied with two 1/2" x 1 1/4" hex head bolts, lockwashers and hex nuts.

Conduit bracket Strap 4" used to secure conduit to pole. Comes with two 1/2 x 1 1/4 hex head bolts.
Aluminum Conduit Bracket Strap, used with T-Slot shapes to secure conduit to pole. Supplied with two 1/2" x 1 1/4" hex head bolts, lockwashers and hex nuts.

Conduit bracket strap 5" used to secure conduit to pole. Come with two 1/2" x 1 1/4 hex head bolts.
Aluminum Conduit Bracket Strap, used with T-Slot shapes to secure conduit to pole. Supplied with two 1/2" x 1 1/4" hex head bolts, lockwashers and hex nuts.

Conduit bracket strap 6" used to secure conduit to pole. Comes with two 1/2" x 1 1/4 hex head bolts.
Aluminum Conduit Bracket Strap, used with T-Slot shapes to secure conduit to pole. Supplied with two 1/2" x 1 1/4" hex head bolts, lockwashers and hex nuts.

Conduit bracket strap 1.5" used to secure conduit to pole. Comes with two 1/2" X 1-1/4 hex head bolts.
Aluminum Conduit Bracket Strap, used with T-Slot shapes to secure conduit to pole. Supplied with two 1/2" x 1 1/4" hex head bolts, lockwashers and hex nuts.

Conduit bracket strap used to secure conduit to pole. Comes with 1/2" X 1 1/4 hex head bolts.
Aluminum Conduit Bracket Strap, used with T-Slot shapes to secure conduit to pole. Supplied with two 1/2" x 1 1/4" hex head bolts, lockwashers and hex nuts.

Conduit bracket strap 3.5" used to secure conduit to pole. Comes with two 1/2" x 1 1/4 hex head bolts.
Aluminum Conduit Bracket Strap, used with T-Slot shapes to secure conduit to pole. Supplied with two 1/2" x 1 1/4" hex head bolts, lockwashers and hex nuts.

Provides a 12 inch clearance from the pole and is fastened with two 5/8 inch mounting bolts. Clamp plates are reversible to accept a wide range of messenger diameters.

• Hot dip Glavanisex Ductile Iron

H-J7920 ARM CABLE EXTENSION
3 x 2-1/2 x 5/16 Angle Size 17-1/2-26 extension from center of Pole.
hot dip galvanized Telephone cable support.

This Nehrwess V-Bracket type Conduit Standoff Works with 2-4" conduit straps. Includes an 8" H-Channel. Bracket is used to support conduit 6" from a pole.

Conduit Strap sold separately.

2" Aluminum conduit strap, works with the aluminum H-Channel attached to Nehrwess conduit standoff brackets. Includes 2 stainless steel bolts and nuts.